EUROLAB
ansi-s111-specification-for-octave-band-and-fractional-octave-band-filters
Noise and Acoustic Performance Testing ANSI S1.13 Method for Measurement of Noise ExposureANSI S1.13-2013 Methods for Environmental Noise MeasurementANSI S1.4 Sound Level Meters – Performance SpecificationsANSI S12.10 Measurement of Noise in Healthcare FacilitiesANSI S12.10 Measurement of Noise in Occupational EnvironmentsANSI S12.19 Measurement of Aircraft NoiseANSI S12.19 Measurement of Noise from Industrial EquipmentANSI S12.19 Measurement of Noise from Power GeneratorsANSI S12.2 Criteria for Evaluating Noise ControlANSI S12.2 Criteria for Noise Control in Medical SettingsANSI S12.50 Measurement of Noise from Recreational ActivitiesANSI S12.53 Measurement of Noise from Industrial FansANSI S12.54 Measurement of Noise in Educational FacilitiesANSI S12.6-2016 Methods for Measuring Noise Reduction of Hearing ProtectorsANSI S12.60 Acoustical Performance in ClassroomsANSI S12.60 Noise Criteria for Schools and HospitalsANSI S12.60-2002 Acoustical Performance CriteriaANSI S12.63 Measurement of Environmental Noise in Urban AreasANSI S12.71 Guidelines for Noise Control in Medical FacilitiesANSI S12.72 Measurement of Noise from Outdoor EquipmentANSI S12.9 Measurement of Environmental NoiseANSI S12.9-2016 Measurement of Environmental NoiseANSI S3.1 Specifications for AudiometersANSI S3.22 Criteria for Hearing Protection DevicesANSI S3.22 Measurement of Hearing ProtectorsANSI S3.25 Measurement of Noise Impact on HearingANSI S3.25 Method for Measuring Noise-Induced Hearing LossANSI S3.29 Measurement of Noise-Induced Hearing Loss RiskANSI S3.35 Measurement of Hearing ThresholdsANSI S3.44 Measurement of Noise Exposure RiskANSI S3.6 Specification for AudiometersANSI S3.7 Sound Level CalibratorsANSI S3.7 Specification for Sound Level CalibratorsIEC 60118-4 Acoustic Performance of Hearing AidsIEC 60529 Acoustic Protection Ratings for Medical DevicesIEC 60584 Acoustic Standards for Medical ThermometersIEC 60601-1-8 Acoustic Alarm Requirements for Medical DevicesIEC 60601-2-12 Acoustic Noise Limits for Critical Care EquipmentIEC 60601-2-13 Acoustic Limits for Cardiovascular EquipmentIEC 60601-2-14 Acoustic Limits for Infusion PumpsIEC 60601-2-22 Acoustic Limits for Surgical DevicesIEC 60601-2-25 Acoustic Limits for ElectroencephalographsIEC 60601-2-26 Acoustic Limits for EEG DevicesIEC 60601-2-27 Acoustic Noise Limits for ElectrocardiographsIEC 60601-2-28 Acoustic Noise Limits for RespiratorsIEC 60601-2-31 Acoustic Noise Limits for Ultrasound EquipmentIEC 60601-2-34 Acoustic Noise Limits for MRI EquipmentIEC 60601-2-36 Acoustic Noise Limits for DefibrillatorsIEC 60601-2-40 Medical Electrical Equipment – Acoustic Noise LimitsIEC 60601-2-43 Acoustic Limits for X-ray EquipmentIEC 60601-2-49 Acoustic Limits for Neonatal Care EquipmentIEC 60601-2-50 Acoustic Limits for Medical VentilatorsIEC 60601-2-58 Acoustic Limits for Endoscopic EquipmentIEC 60601-2-59 Acoustic Limits for Dialysis EquipmentIEC 60601-2-61 Acoustic Limits for Anesthesia EquipmentIEC 60601-2-65 Acoustic Limits for Monitoring EquipmentIEC 60601-2-66 Acoustic Limits for Respiratory EquipmentIEC 60601-2-67 Acoustic Limits for Hemodialysis EquipmentIEC 60601-2-68 Acoustic Limits for Patient MonitorsIEC 60601-2-69 Acoustic Limits for Radiotherapy EquipmentIEC 60601-2-70 Acoustic Limits for Infusion DevicesIEC 60601-2-71 Acoustic Limits for Physiotherapy EquipmentIEC 60601-2-72 Acoustic Limits for Neonatal IncubatorsIEC 60601-2-73 Acoustic Limits for Blood Pressure MonitorsIEC 60846 Acoustic Measurement for Medical ImplantsIEC 62304 Acoustic Requirements for Medical Software AlarmsIEC 62359 Acoustic Safety in Medical DevicesIEC 62366 Acoustic Performance for Medical Device UsabilityISO 10302 Acoustics – Impulse Noise MeasurementISO 10816 Mechanical Vibration – Evaluation of Machine VibrationISO 10848-2 Acoustic Emission Testing for Structural IntegrityISO 11200 Acoustics – Noise Emission for MachineryISO 11201 Measurement of Noise from MachineryISO 11202 Measurement of Noise Emission from Small MachinesISO 13472 Measurement of Noise Emission from VehiclesISO 13472-2 Noise Emission Measurement MethodsISO 14257 Acoustic Noise from Household AppliancesISO 14257 Acoustic Noise from Household EquipmentISO 1450 Noise Emission from Portable Power ToolsISO 14509 Noise Emission from Construction EquipmentISO 1451 Noise Emission of Hand-Held MachinesISO 15666 Guidelines for Noise Annoyance AssessmentISO 15744 Measurement of Sound Power Levels of Noise SourcesISO 16032 Acoustics – Measurement of Noise Emitted by MachinesISO 16063-1 Methods for Calibration of Acoustic SensorsISO 16147 Measurement of Noise from Agricultural EquipmentISO 17497-1 Acoustic Noise Measurement in Reverberation RoomsISO 1996-1 Description, Measurement and Assessment of Environmental NoiseISO 1996-2 Description and Measurement of Environmental NoiseISO 266 Acoustics – Preferred FrequenciesISO 2923 Acoustics – Measurement of Impulse NoiseISO 2969 Measurement of Noise from Small MachinesISO 3382-1 Measurement of Reverberation Time in RoomsISO 3382-2 Measurement of Reverberation Time in Open Plan OfficesISO 3744 Acoustics – Determination of Sound Power LevelsISO 3745 Acoustics – Precision Sound Level MeasurementsISO 389-7 Acoustics – Reference Threshold of HearingISO 389-8 Audiometric Reference LevelsISO 532 Method for Calculation of LoudnessISO 8253-1 Audiometric Test MethodsISO 8297 Acoustics – Noise from ShipsISO 9613-2 Acoustics – Attenuation of Sound during PropagationISO 9614-1 Acoustic Intensity MeasurementISO 9614-2 Acoustic Intensity Measurement – Scanning Method

ANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Filters Laboratory Testing Service Provided by Eurolab

Standard-Related Information

The ANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Filters testing service is governed by a comprehensive set of standards that ensure accuracy, precision, and reliability in laboratory testing. The following sections provide an overview of the relevant standards, their scope, and application.

International Standards

  • ISO 9614-1:2015: Acoustics - Determination of sound power levels of noise sources using sound pressure - Part 1: Measurement at a single point on a complex surface

  • ASTM E1049-05(2010): Standard Practice for Evaluating the Performance of Acoustic Calibrators

  • EN 60651:2006: Acoustics - Specification for octave-band and fractional-octave-band analog and digital filter devices

    • National Standards

  • TSE EN ISO 9614-1:2015: Türkiye Standardi, which is a translation of the international standard

  • ASTM E1049-05(2010): The American Society for Testing and Materials (ASTM) standard for evaluating acoustic calibrator performance

    • Industry-Specific Standards

  • IEC 61672-1:2008: Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications

  • ISO/TS 16952-1:2015: Technical specification - Metrology for the measurement of vibrations and shock - Part 1: General requirements

    • Standard Development Organizations

    The development and maintenance of these standards are carried out by various standard development organizations, including:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Electrotechnical Standardization (CENELEC)

    • These organizations collaborate to ensure that international standards are aligned with national requirements.

    Evolution of Standards

    Standards evolve through a continuous process of review, revision, and updates. This ensures that they remain relevant, accurate, and effective in meeting the needs of industries and regulatory bodies.

    Standard Requirements and Needs

    The ANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Filters testing service is essential for ensuring product safety, reliability, and compliance with regulations. The following sections explain why this test is necessary, its business and technical requirements, and the consequences of not performing it.

    Industry-Specific Requirements

    The following industries require ANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Filters testing:

  • Aerospace: To ensure that noise levels do not exceed regulatory limits

  • Automotive: To measure sound power levels and determine noise reduction requirements

  • Industrial: To monitor and control noise levels in workplaces

    • Technical Requirements

    This test is required to:

  • Ensure product safety and compliance with regulations

  • Meet international standards for noise measurement and assessment

  • Provide accurate data for noise reduction and mitigation efforts

    • Consequences of Not Performing This Test

    Failing to perform this test can lead to:

  • Non-compliance with regulatory requirements

  • Product recalls or withdrawals due to inadequate noise control measures

  • Financial losses resulting from non-compliance and product failures

    • Test Conditions and Methodology

    The following sections explain the step-by-step process for conducting ANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Filters testing, including equipment used, test environment requirements, sample preparation procedures, and measurement methods.

    Testing Equipment and Instruments

  • Sound level meters: For accurate noise measurements

  • Octave-band filters: To measure sound power levels in specific frequency ranges

  • Calibration instruments: To ensure accuracy and precision of measurements

    • Test Environment Requirements

    The test environment must meet the following conditions:

  • Temperature: 20C 5C (68F 9F)

  • Humidity: 40 to 60

  • Pressure: Atmospheric pressure

    • Sample Preparation Procedures

    Samples are prepared according to specific requirements, including:

  • Cleaning and preparation of surfaces

  • Installation of measurement equipment

    • Testing Parameters and Conditions

    The test is conducted under the following parameters and conditions:

  • Frequency range: 10 Hz to 20 kHz

  • Amplitude: up to 140 dB (re 1 pW/m²)

  • Test duration: typically 30 minutes to 1 hour

    • Test Reporting and Documentation

    The following sections explain how test results are documented, reported, and interpreted.

    Report Format and Structure

    Reports include:

  • Summary of test parameters and conditions

  • Measurement data and results

  • Calculation and analysis of noise levels

  • Conclusion and recommendations

    • Interpretation of Results

    Results are interpreted in accordance with international standards for noise measurement and assessment.

    Conclusion

    The ANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Filters testing service is essential for ensuring product safety, compliance with regulations, and accurate data for noise reduction efforts. Eurolab provides this service with the highest level of precision and accuracy, using state-of-the-art equipment and following strict guidelines to ensure that results meet international standards.

    References

  • ISO 9614-1:2015 - Acoustics - Determination of sound power levels of noise sources using sound pressure - Part 1: Measurement at a single point on a complex surface

  • ASTM E1049-05(2010) - Standard Practice for Evaluating the Performance of Acoustic Calibrators

  • EN 60651:2006 - Acoustics - Specification for octave-band and fractional-octave-band analog and digital filter devices

    • About Eurolab

    Eurolab is a leading provider of laboratory testing services, including noise measurement and assessment. With state-of-the-art equipment and highly trained personnel, we ensure that our results meet international standards for accuracy and precision.

    Contact us today to learn more about our ANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Filters testing service.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers