EUROLAB
astm-d130-corrosion-testing-of-metals
Chemical Resistance and Material Compatibility Testing ASTM D130 Copper Corrosion TestingASTM D2240 Hardness Testing of Polymer MaterialsASTM D2240 Hardness Testing Post Chemical ExposureASTM D256 Impact Resistance After Chemical ExposureASTM D257 Electrical Resistivity Post Chemical ExposureASTM D2765 Thermal Analysis After Chemical ExposureASTM D3359 Adhesion of Coatings Post Chemical ExposureASTM D3359 Adhesion Testing After Chemical ExposureASTM D3762 Abrasion Resistance Post Chemical ExposureASTM D3985 Oxygen Transmission Rate After Chemical ExposureASTM D4216 Chemical Resistance of PolypropyleneASTM D471 Swelling Resistance in LiquidsASTM D4727 Resistance of Rubber to ChemicalsASTM D522 Flexibility Post Chemical ExposureASTM D543 Chemical Resistance of PlasticsASTM D543 Resistance of Plastics to Chemical ReagentsASTM D543-14 Chemical Resistance of Plastics and ElastomersASTM D570 Water Absorption of PlasticsASTM D570 Water Absorption of Polymer SamplesASTM D638 Tensile Properties After Chemical TreatmentASTM D638 Tensile Testing of Chemical-Exposed SamplesASTM D638 Tensile Testing Post Chemical ExposureASTM D648 Heat Deflection Temperature After Chemical ExposureASTM D7338 Chemical Resistance of PolyethyleneASTM D746 Low Temperature Impact Post Chemical ExposureASTM D7569 Resistance to Chemical ExposureASTM D792 Density of Plastics After Chemical ExposureASTM D882 Tensile Properties of Thin Plastic SheetingASTM E96 Water Vapor Transmission Post Chemical ExposureASTM F1515 Chemical Resistance of Medical PlasticsASTM F1522 Resistance to Chemicals in Medical DevicesASTM F1874 Chemical Resistance of ElastomersASTM F2026 Chemical Resistance of Polymeric MaterialsASTM F2028 Chemical Compatibility of Surgical InstrumentsASTM F2033 Chemical Resistance of Medical PolymersASTM F2299 Resistance to Bacterial PenetrationASTM F2397 Chemical Resistance of ElastomersASTM F739 Chemical Permeation TestingASTM F748 Resistance of Polymers to ChemicalsASTM F903 Liquid Penetration ResistanceASTM F904 Chemical Resistance of Polymers in Medical UseISO 10993-1 Biological Evaluation ProcessISO 10993-10 Biological Evaluation of MaterialsISO 10993-10 Irritation Testing Post Chemical ExposureISO 10993-11 Cytotoxicity Testing Post Chemical ExposureISO 10993-12 Chemical Resistance Sample PreparationISO 10993-13 Extraction Methods for Medical DevicesISO 10993-14 Degradation Products in Medical MaterialsISO 10993-15 Identification of Degradation ProductsISO 10993-16 Toxicokinetics of MaterialsISO 10993-17 Toxicological Risk AssessmentISO 10993-18 Chemical Characterization of Medical DevicesISO 10993-19 Chemical Characterization for Medical DevicesISO 10993-2 Animal Welfare Requirements in TestingISO 10993-20 Sensitization TestingISO 10993-21 Evaluation of Degradation ProductsISO 10993-22 Evaluation of Material InteractionISO 10993-23 Assessment of ToxicityISO 10993-24 Evaluation of Extractables and LeachablesISO 10993-25 Material Compatibility ValidationISO 10993-26 Chronic Toxicity TestingISO 10993-27 Immunotoxicology TestingISO 10993-28 Mutagenicity TestingISO 10993-29 Chemical Residue LimitsISO 10993-3 Genotoxicity Testing of Medical MaterialsISO 10993-30 Toxicological Risk AssessmentISO 10993-4 Blood Compatibility TestingISO 10993-4 Hemocompatibility TestingISO 10993-5 In Vitro CytotoxicityISO 10993-6 Local Effects after Chemical ExposureISO 10993-7 Ethylene Oxide Residue LimitsISO 10993-8 Material Compatibility with BloodISO 10993-9 Selection of Tests for Medical MaterialsISO 11135 Material Compatibility in EO SterilizationISO 11135-1 EO Sterilization Material CompatibilityISO 11135-2 EO Sterilization Effects on MaterialsISO 11137 Chemical Resistance of Sterilized DevicesISO 11607 Material Compatibility with SterilizationISO 13485 Material Compatibility RequirementsISO 14644-1 Cleanroom Material CompatibilityISO 14644-3 Cleanroom Material CompatibilityISO 22442 Compatibility of Implants with Biological SystemsISO 22442-2 Biocompatibility TestingISO 22442-3 Evaluation of Material Safety

ASTM D130 Corrosion Testing of Metals: Eurolabs Laboratory Testing Service

The ASTM D130 Corrosion Testing of Metals is a widely recognized standard for evaluating the corrosivity of metals in various environments. The standard is published by the American Society for Testing and Materials (ASTM) and is widely accepted across the globe.

Legal and Regulatory Framework Surrounding ASTM D130 Corrosion Testing of Metals

The ASTM D130 Corrosion Testing of Metals is governed by a set of international, national, and industry-specific standards. These standards dictate the requirements for testing, sampling, and reporting. The legal and regulatory framework surrounding this testing service includes:

  • International Organization for Standardization (ISO) 9227:2012

  • European Standard EN ISO 9227:2006

  • Turkish Standards Institution (TSE) ICS 77.080.20

  • Industry-specific standards, such as those developed by the American Petroleum Institute (API)

    • Standard Development Organizations and Their Role

    Standard development organizations play a crucial role in shaping the testing industry. These organizations include:

  • ASTM International: Develops, publishes, and maintains standards for materials, products, systems, and services

  • ISO: Develops and publishes international standards for various industries

  • TSE: Develops and publishes national standards for Turkey

    • Evolution of Standards and Updates

    Standards evolve over time to reflect changes in technology, industry practices, and regulatory requirements. The ASTM D130 Corrosion Testing of Metals standard has undergone several updates since its initial publication.

    Specific Standard Numbers and Their Scope

    The following are the specific standard numbers and their scope for the ASTM D130 Corrosion Testing of Metals:

  • ISO 9227:2012: Evaluates the corrosivity of metals in various environments

  • EN ISO 9227:2006: Similar to ISO 9227, but with European-specific requirements

  • TSE ICS 77.080.20: Turkish national standard for corrosion testing

    • Standard Compliance Requirements for Different Industries

    Industry-specific standards and regulations dictate the compliance requirements for the ASTM D130 Corrosion Testing of Metals.

    The ASTM D130 Corrosion Testing of Metals is a critical test for evaluating the corrosivity of metals in various environments. This section explains why this specific test is needed and required, as well as the business and technical reasons for conducting it.

    Business and Technical Reasons for Conducting ASTM D130 Corrosion Testing of Metals

    The business and technical reasons for conducting the ASTM D130 Corrosion Testing of Metals include:

  • Ensuring product safety and reliability

  • Complying with industry-specific regulations and standards

  • Evaluating the corrosivity of metals in various environments

  • Reducing the risk of corrosion-related failures and damage

    • Consequences of Not Performing This Test

    Failing to conduct the ASTM D130 Corrosion Testing of Metals can have severe consequences, including:

  • Product failure and damage

  • Regulatory non-compliance

  • Safety risks for users and operators

    • Industries and Sectors that Require This Testing

    The following industries and sectors require the ASTM D130 Corrosion Testing of Metals:

  • Oil and gas

  • Chemicals

  • Construction

  • Aerospace

    • This section provides a detailed explanation of how the test is conducted, including the testing equipment and instruments used, sample preparation procedures, and measurement and analysis methods.

    Step-by-Step Explanation of How the Test Is Conducted

    The ASTM D130 Corrosion Testing of Metals involves the following steps:

    1. Sampling: Collecting representative samples of the metal to be tested

    2. Sample Preparation: Preparing the samples for testing by cleaning, cutting, or machining

    3. Testing: Exposing the samples to a corrosive environment and measuring the resulting corrosion

    4. Measurement and Analysis: Measuring and analyzing the corrosion data to determine the corrosivity of the metal

    Testing Equipment and Instruments Used

    The following equipment and instruments are used for conducting the ASTM D130 Corrosion Testing of Metals:

  • Corrosion testing chambers or cells

  • pH meters

  • Redox meters

  • Spectrophotometers

  • Scanning electron microscopes (SEMs)

    • Testing Environment Requirements

    The testing environment requires a controlled atmosphere with specific temperature, humidity, and pressure conditions.

    This section explains how test results are documented and reported, including the report format and structure, interpretation of test results, certification and accreditation aspects, traceability and documentation requirements, reporting standards and formats, validation and verification procedures, electronic reporting systems used, confidentiality and data protection measures.

    Report Format and Structure

    The ASTM D130 Corrosion Testing of Metals report includes:

  • Test method

  • Sample information

  • Test conditions

  • Results

  • Discussion and conclusions

    • Why Choose Eurolabs Laboratory Testing Service?

    At Eurolab, our experienced team of technicians and engineers conduct the ASTM D130 Corrosion Testing of Metals with precision and accuracy. Our state-of-the-art testing equipment ensures that your products meet the highest standards of safety and reliability.

    Conclusion

    The ASTM D130 Corrosion Testing of Metals is a critical test for evaluating the corrosivity of metals in various environments. By understanding the standard-related information, standard requirements and needs, test conditions and methodology, reporting and documentation, you can make informed decisions about your products and ensure compliance with industry-specific regulations and standards.

    References

  • ASTM International. (2020). D130 Corrosion Testing of Metals.

  • ISO. (2012). 9227: Evaluates the corrosivity of metals in various environments.

  • EN ISO 9227. (2006). Similar to ISO 9227, but with European-specific requirements.

    • By following these guidelines and choosing Eurolabs laboratory testing service, you can ensure that your products meet the highest standards of safety and reliability.

    FAQs

  • What is the ASTM D130 Corrosion Testing of Metals?

    • The ASTM D130 Corrosion Testing of Metals is a widely recognized standard for evaluating the corrosivity of metals in various environments.

  • Why do I need to conduct the ASTM D130 Corrosion Testing of Metals?

    • Conducting the ASTM D130 Corrosion Testing of Metals ensures product safety and reliability, complies with industry-specific regulations and standards, evaluates the corrosivity of metals in various environments, reduces the risk of corrosion-related failures and damage.

  • What are the consequences of not performing this test?

    • Failing to conduct the ASTM D130 Corrosion Testing of Metals can have severe consequences, including product failure and damage, regulatory non-compliance, safety risks for users and operators.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers