EUROLAB
astm-d618-accelerated-aging-and-stability-testing-of-polymers
Stability and Compatibility Studies ASTM D1308 Chemical Resistance and Stability TestingASTM D4056 Compatibility Testing of Polymers in ProductsASTM D4065 Dynamic Mechanical Analysis for StabilityASTM D4332 Environmental Chamber Testing for StabilityASTM D6940 Stability Testing of Adhesive CosmeticsASTM E1309 Compatibility of Ingredients in FormulationsASTM E1447 Thermal Compatibility Testing of Cosmetic IngredientsASTM E1980 Accelerated Aging of Skin Care ProductsASTM E2169 Microbial Stability Testing of CosmeticsASTM E2243 Microbial Challenge Testing for StabilityASTM F1980 Accelerated Stability Testing of Medical DevicesEN ISO 11348 Luminescent Bacteria Test for Stability AnalysisEP 2.2.16 Determination of pH for Stability EvaluationEP 2.2.28 Determination of Residual Solvents in Stability SamplesEP 2.2.29 Water Determination for Stability SamplesEP 2.9.12 Determination of Viscosity for Stability TestingEP 5.1.5 Microbial Quality Control in Stability SamplesFDA 21 CFR Part 211 Stability Testing RegulationsFDA Guidance for Stability Protocols in PharmaceuticalsFDA Guidance for Stability Testing of Topical ProductsFDA Guidance on Photostability Testing of ProductsFDA Guidance on Stability Testing in PharmaceuticalsICH Q1A(R2) Stability Testing of New Drug Substances and ProductsISO 10993-11 Toxicity Testing Related to Product StabilityISO 10993-17 Toxicological Risk Assessment for StabilityISO 10993-5 Cytotoxicity Testing for Stability AssessmentISO 10993-9 Biological Evaluation of Stability SamplesISO 11348-1 Luminescent Bacteria Test for StabilityISO 11607 Packaging Stability for Medical DevicesISO 11930 Preservative Effectiveness Testing in Stability StudiesISO 11987 Compatibility Testing of Plastics for StabilityISO 12732 Stability Testing of Personal Care ProductsISO 14502-1 Chemical Analysis of Cosmetics for StabilityISO 14516 Determination of Antioxidants in Stability StudiesISO 14644 Cleanroom Stability Conditions for ManufacturingISO 15193 Packaging Stability Testing of Personal Care ProductsISO 16128 Guidelines for Natural and Organic Cosmetic StabilityISO 16128-2 Calculation of Natural Content StabilityISO 16128-3 Natural Ingredients Stability AssessmentISO 16637 Compatibility Testing for Medical DevicesISO 16750 Environmental Conditions Testing for Electrical StabilityISO 16750-4 Electrical and Mechanical Stability TestingISO 17516 Microbial Quality Limits in StabilityISO 17516 Microbiological Limits for Stability StudiesISO 18852 Stability Testing of Textile TreatmentsISO 20252 Guidelines for Stability in Clinical InvestigationsISO 20252 Guidelines for Stability in Clinical TrialsISO 22514 Statistical Methods for Stability Data AnalysisISO 22514-2 Validation of Stability Testing MethodsISO 22611 Physical Compatibility Testing of Cosmetic ProductsISO 22716 GMP for Stability and Quality AssuranceISO 22716 Good Manufacturing Practices for StabilityISO 24367 Shelf Life and Stability Testing for CosmeticsISO/TR 10105 Evaluation of Cosmetic Product StabilityISO/TR 15961 Analytical Methods for Stability StudiesISO/TR 17399 Compatibility and Stability of Biocompatible MaterialsUSP <1086> Pharmaceutical Stability Validation ProceduresUSP <1220> Stability Testing of Drug ProductsUSP <1220> Stability Testing of Pharmaceuticals and CosmeticsUSP <1225> Validation of Stability-Indicating MethodsUSP <151> Stability Studies for Topical ProductsUSP <71> Sterility Testing for Stability StudiesUSP <71> Sterility Testing in Stability Protocols

ASTM D618 Accelerated Aging and Stability Testing of Polymers: Eurolabs Laboratory Testing Service

Standard-Related Information

ASTM D618 is a widely recognized standard for accelerated aging and stability testing of polymers, developed by the American Society for Testing and Materials (ASTM). This standard is designed to simulate the effects of environmental stress on polymer materials, such as heat, humidity, light, and chemicals. The test is crucial in evaluating the materials performance, durability, and shelf life.

Legal and Regulatory Framework

The legal and regulatory framework surrounding ASTM D618 testing is governed by various international and national standards. Some of these include:

  • ISO 11359 (International Organization for Standardization)

  • EN 60811 (European Committee for Electrotechnical Standardization)

  • TSE (Turkish Standards Institution)

  • Other national and regional standards

    • These standards outline the requirements for testing, reporting, and certification. Compliance with these standards is essential to ensure product safety, reliability, and market access.

    Standard Development Organizations

    The ASTM, ISO, EN, and other standard development organizations play a vital role in creating and maintaining standards. These organizations:

  • Develop and publish new standards

  • Update existing standards to reflect technological advancements

  • Provide guidelines for testing and certification

    • International and National Standards

    Some specific standard numbers related to ASTM D618 accelerated aging and stability testing of polymers include:

  • ISO 11359:2013 - Plastics - Determination of the melting point

  • EN 60811-2-1:2006 - Electrical insulating materials and systems - Thermal endurance properties - Part 2-1: Assignment of thermal classes

  • TSE IEC 60216-4:2010 - Electrical insulating materials - Thermal endurance properties

    • Standard Compliance Requirements

    Industries requiring compliance with ASTM D618 testing include:

  • Plastics manufacturing

  • Automotive

  • Aerospace

  • Electronics

  • Chemicals and pharmaceuticals

    • Non-compliance can result in product recalls, fines, and reputational damage.

    Why This Test is Needed and Required

    This specific test is essential for evaluating the performance of polymer materials under various environmental conditions. The consequences of not performing this test include:

  • Reduced product lifespan

  • Decreased reliability and safety

  • Increased maintenance and repair costs

  • Compliance issues and regulatory fines

    • The business and technical reasons for conducting ASTM D618 testing are numerous, including:

  • Quality assurance and control

  • Material selection and specification

  • Product design and development

  • Testing and certification

  • Cost savings through reduced warranty claims

    • Risk Factors and Safety Implications

    Failure to conduct this test can lead to:

  • Reduced product safety and reliability

  • Increased risk of material failure

  • Compliance issues and regulatory fines

  • Reputational damage and loss of customer confidence

    • Quality Assurance and Quality Control Aspects

    This test contributes significantly to quality assurance and control by:

  • Evaluating material performance under various environmental conditions

  • Identifying potential material weaknesses and failures

  • Ensuring compliance with international and national standards

    • Competitive Advantages

    By conducting ASTM D618 testing, manufacturers can enjoy several competitive advantages, including:

  • Improved product reliability and safety

  • Increased market access and trade facilitation

  • Enhanced customer confidence and trust building

  • Reduced warranty claims and maintenance costs

  • Compliance with regulatory requirements

    • Cost-Benefit Analysis

    Conducting ASTM D618 testing provides significant cost savings through reduced warranty claims, increased product lifespan, and improved material selection.

    Test Conditions and Methodology

    The test involves simulating environmental stress on polymer materials using various methods, including:

  • Heat aging

  • Humidity testing

  • Light exposure

  • Chemical resistance testing

    • The testing equipment and instruments used include:

  • Thermogravimetric analyzers (TGA)

  • Differential scanning calorimeters (DSC)

  • Ultraviolet (UV) spectrophotometers

  • High-pressure testers (HPT)

    • Test Reporting and Documentation

    Results are documented and reported in a standardized format, including:

  • Test conditions and methodology

  • Material performance data

  • Comparison to reference materials

  • Recommendations for material selection and specification

    • The report format and structure comply with international and national standards.

    Why This Test Should Be Performed

    Performing ASTM D618 testing provides numerous benefits, including:

  • Improved product safety and reliability

  • Reduced warranty claims and maintenance costs

  • Enhanced customer confidence and trust building

  • Compliance with regulatory requirements

  • Increased market access and trade facilitation

    • Why Eurolab Should Provide This Service

    Eurolab is the ideal partner for this service due to its expertise, state-of-the-art equipment, and qualified personnel. Our services include:

  • Expertise in ASTM D618 testing

  • State-of-the-art testing equipment and facilities

  • Qualified and certified personnel

  • Accreditation and certification details

  • International recognition and partnerships

  • Quality management systems and procedures

    • Conclusion

    ASTM D618 accelerated aging and stability testing of polymers is a crucial evaluation method for manufacturers. Eurolabs expertise, state-of-the-art equipment, and qualified personnel make us the ideal partner for this service. By conducting ASTM D618 testing, manufacturers can enjoy numerous benefits, including improved product safety and reliability, reduced warranty claims, and enhanced customer confidence.

    Recommendations

    We recommend that manufacturers:

  • Conduct ASTM D618 testing to evaluate polymer material performance under various environmental conditions

  • Select materials based on test results

  • Develop products with improved safety and reliability

  • Enhance customer confidence through compliance with regulatory requirements

    • By following these recommendations, manufacturers can ensure the quality, safety, and durability of their products.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers