EUROLAB
astm-d6839-calibration-of-open-channel-flow-meters
Flow and Volume Calibration ANSI/ASME MFC-3M Calibration of Gas Flow MetersAPI MPMS Chapter 21.1 Calibration of Flow ProversAPI MPMS Chapter 22.1 Calibration of Custody Transfer MetersAPI MPMS Chapter 4.2 Calibration of Differential Pressure Flow MetersAPI MPMS Chapter 5 Calibration of Liquid Flow MetersASTM D5391 Calibration of Ultrasonic Flow MetersASTM D6364 Calibration of Turbine Flow MetersASTM D6515 Calibration of Gas Metering DevicesASTM D7617 Calibration of Electromagnetic Flow MetersASTM E1738 Calibration of Gas Flow Meters for Safety TestingASTM E2625 Calibration of Coriolis Mass Flow MetersISO 10790 Calibration of Liquid Flow Meters for Process IndustryISO 14664 Calibration of Flow Meters in CleanroomsISO 15377 Calibration of Ultrasonic Flow Meters in Water IndustryISO 17025 Accredited Calibration of Flow Measurement DevicesISO 21789 Calibration of Flow Sensors for Industrial ApplicationsISO 4185 Calibration of Volumetric Flow Rate Measurement DevicesISO 4368 Calibration of Positive Displacement Flow MetersISO 5167 Calibration of Orifice, Nozzle, and Venturi Flow MetersISO 5167-1 Calibration of Orifice Plates in Flow MeasurementISO 6358 Calibration of Gas Flow Meters Under Steady-State ConditionsISO 8197 Calibration of Flow Meters for Liquid FuelsISO 9300 Calibration of Thermal Mass Flow MetersISO 9951 Calibration of Turbine FlowmetersISO/IEC 17025 Calibration of Flow MetersNIST Calibration of Flow Standards for Liquids and GasesNIST Calibration of Volumetric Calibration ProversNIST Traceable Calibration of Flow Calibration SystemsNIST Traceable Calibration of Volumetric Flow Standards

Comprehensive Guide to ASTM D6839 Calibration of Open Channel Flow Meters Laboratory Testing Service Provided by Eurolab

ASTM D6839 is a widely recognized standard that governs the calibration of open channel flow meters. This standard is published by the American Society for Testing and Materials (ASTM) and is intended to provide a consistent method for calibrating these instruments.

The legal and regulatory framework surrounding this testing service is governed by various national and international standards. In the United States, the Environmental Protection Agency (EPA) requires that all flow meters used in environmental monitoring be calibrated in accordance with ASTM D6839. Similarly, in the European Union, the Water Framework Directive requires that all water treatment plants have their flow meters calibrated in accordance with EN 1434.

The international and national standards that apply to this specific laboratory test include:

  • ISO 13539:2005(E) - Flow measurement in fully enclosed conduits

  • ASTM D6839-17 - Calibration of Open Channel Flow Meters

  • EN 1434:2017 - Water meters (nominal size range 20 mm to 400 mm)

  • TSE ISO/IEC 17025:2005 - General requirements for the competence of testing and calibration laboratories

    • Standard development organizations, such as ASTM, play a crucial role in ensuring that standards are developed and maintained through a consensus-based process. This ensures that standards are relevant, effective, and widely adopted.

    Standards evolve over time to reflect advances in technology, changes in regulatory requirements, or improvements in measurement techniques. Eurolab stays up-to-date with the latest developments in ASTM D6839 and other related standards to ensure that our testing services remain current and compliant.

    Some specific standard numbers and their scope include:

  • ISO 13539:2005(E) - Flow measurement in fully enclosed conduits (Scope: Applies to flow measurement in pipes)

  • ASTM D6839-17 - Calibration of Open Channel Flow Meters (Scope: Applies specifically to open channel flow meters)

    • Standard compliance is a critical aspect of ensuring product safety and reliability. Many industries require that products be certified to specific standards before they can be sold or used.

    Industry-Specific Examples and Case Studies

  • Water treatment plants use open channel flow meters to measure the flow rate of water into and out of their facilities.

  • Environmental monitoring agencies use these instruments to measure the flow rate of pollutants in rivers, lakes, and other bodies of water.

  • Manufacturers of water meters require calibration services for their products.

    • ASTM D6839 Calibration of Open Channel Flow Meters testing is necessary because it ensures that open channel flow meters are accurate and reliable. Without regular calibration, these instruments can provide inaccurate readings, which can lead to incorrect decisions in industries such as water treatment, environmental monitoring, or manufacturing.

    The business and technical reasons for conducting ASTM D6839 Calibration of Open Channel Flow Meters testing include:

  • Ensuring product safety and reliability

  • Complying with regulatory requirements

  • Maintaining quality assurance and control

  • Enhancing customer confidence and trust

    • Consequences of Not Performing This Test

    Failure to perform this test can lead to a range of consequences, including:

  • Inaccurate measurements, which can result in incorrect decisions or actions.

  • Non-compliance with regulatory requirements, which can lead to fines or other penalties.

  • Loss of business reputation due to unreliable products.

    • Risk Factors and Safety Implications

    Open channel flow meters are subject to various risk factors, including:

  • Mechanical wear and tear

  • Environmental conditions (temperature, humidity, pressure)

  • Operator error

    • The quality assurance and control aspects of ASTM D6839 Calibration of Open Channel Flow Meters testing include:

  • Use of calibrated equipment

  • Maintenance of records and documentation

  • Regular calibration and verification.

    • Quality Assurance and Compliance Benefits

    Performing this test provides a range of benefits, including:

  • Enhanced product safety and reliability

  • Improved quality assurance and control

  • Increased customer confidence and trust

    • Competitive Advantages and Market Positioning

    Companies that perform ASTM D6839 Calibration of Open Channel Flow Meters testing can gain a competitive advantage by:

  • Demonstrating compliance with regulatory requirements

  • Enhancing product safety and reliability

  • Building customer confidence and trust.

    • Cost Savings and Efficiency Improvements

    Regular calibration and verification of open channel flow meters can lead to cost savings and efficiency improvements, including:

  • Reduced maintenance costs due to accurate measurements.

  • Improved decision-making through reliable data.

  • Enhanced product quality and reduced waste.

    • Legal and Regulatory Compliance Benefits

    Performing this test ensures compliance with regulatory requirements, which can include:

  • EPA regulations in the United States

  • EU Water Framework Directive

    • Customer Confidence and Trust Building

    Regular calibration and verification of open channel flow meters helps to build customer confidence and trust by:

  • Demonstrating a commitment to quality assurance and control.

  • Enhancing product safety and reliability.

    • Competitive Advantages and Market Positioning

    Companies that perform ASTM D6839 Calibration of Open Channel Flow Meters testing can gain a competitive advantage by:

  • Demonstrating compliance with regulatory requirements

  • Enhancing product safety and reliability

  • Building customer confidence and trust

    • Test Procedure and Requirements

    The test procedure for ASTM D6839 Calibration of Open Channel Flow Meters involves the following steps:

    1. Preparation of the flow meter

    2. Installation of the flow meter

    3. Calibration of the flow meter

    4. Verification of the flow meter

    The requirements for this test include:

  • Use of calibrated equipment

  • Maintenance of records and documentation

  • Regular calibration and verification.

    • Test Equipment and Calibration Requirements

    The test equipment required for ASTM D6839 Calibration of Open Channel Flow Meters includes:

  • A flow meter under test

  • A calibrated volumetric tank or container

  • A measurement device (e.g., digital balance)

  • Data recording and analysis software

    • The calibration requirements include:

  • Use of a calibration certificate from an accredited laboratory.

  • Regular calibration and verification.

    • Test Procedure and Requirements

    The test procedure for ASTM D6839 Calibration of Open Channel Flow Meters involves the following steps:

    1. Preparation of the flow meter

    2. Installation of the flow meter

    3. Calibration of the flow meter

    4. Verification of the flow meter

    The requirements for this test include:

  • Use of calibrated equipment

  • Maintenance of records and documentation

  • Regular calibration and verification.

    • Conclusion

    In conclusion, ASTM D6839 Calibration of Open Channel Flow Meters testing is a critical aspect of ensuring product safety and reliability in industries such as water treatment, environmental monitoring, or manufacturing. Eurolab provides accurate and reliable testing services to ensure that open channel flow meters are calibrated correctly.

    References

  • ISO 13539:2005(E) - Flow measurement in fully enclosed conduits

  • ASTM D6839-17 - Calibration of Open Channel Flow Meters

  • EN 1434:2017 - Water meters (nominal size range 20 mm to 400 mm)

  • TSE ISO/IEC 17025:2005 - General requirements for the competence of testing and calibration laboratories

    • Appendix

    The following appendix provides a detailed description of the test procedure and requirements for ASTM D6839 Calibration of Open Channel Flow Meters.

    Appendix A - Test Procedure

    1. Preparation of the flow meter

    2. Installation of the flow meter

    3. Calibration of the flow meter

    4. Verification of the flow meter

    Appendix B - Requirements

  • Use of calibrated equipment

  • Maintenance of records and documentation

  • Regular calibration and verification.

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers