EUROLAB
astm-g182-cyclic-corrosion-testing-for-coatings
Corrosion and Salt Spray Testing ASTM B117 Salt Spray (Fog) Testing for Corrosion ResistanceASTM B117 Salt Spray TestingASTM B368 Corrosion of Stainless SteelsASTM B537 Galvanic Corrosion TestingASTM B845 Cyclic Corrosion TestingASTM D5894 Cyclic Exposure of Painted PanelsASTM D610 Evaluation of Rust on Painted SurfacesASTM D714 Blistering Resistance of PaintsASTM D870 Water Resistance Testing of CoatingsASTM F2129 Corrosion Testing of Cardiovascular DevicesASTM F2129 Cyclic Potentiodynamic Polarization for StentsASTM F746 Crevice Corrosion EvaluationASTM F746 Crevice Corrosion TestingASTM G123 Cyclic Corrosion TestASTM G123 Cyclic Corrosion TestingASTM G142 Evaluation of Corrosion in Condensed EnvironmentsASTM G15 Electrochemical Testing MethodsASTM G150 Cyclic Corrosion Tests Using Alternate ExposuresASTM G18 Accelerated Corrosion TestingASTM G18 Accelerated Corrosion Testing of MetalsASTM G2 Salt Fog Testing for Coated SurfacesASTM G28 Methods for Accelerated Corrosion TestingASTM G31 Immersion Corrosion Test MethodASTM G31 Immersion Corrosion TestsASTM G31 Laboratory Immersion Corrosion TestingASTM G31 Laboratory Immersion TestASTM G31-12 Corrosion Immersion Test for MetalsASTM G44 Corrosion Fatigue TestASTM G44 Corrosion Fatigue TestingASTM G46 Evaluation of Corrosion Under InsulationASTM G48 Pitting and Crevice Corrosion TestingASTM G48A Pitting and Crevice Corrosion Resistance TestASTM G49 Pitting Corrosion ResistanceASTM G5 Potentiostatic and Potentiodynamic Anodic PolarizationASTM G50 Evaluation of Corrosion in Aqueous MediaASTM G61 Corrosion Fatigue of MetalsASTM G61 Corrosion Fatigue of MetalsASTM G85 Annex A1 – Acetic Acid Salt SprayASTM G85 Annex A2 – Acidified Salt Fog TestASTM G85 Annex A3 – Prohesion TestASTM G85 Annex A4 – Acetic Acid Salt Spray TestASTM G85 Annex A5 – SO2 Salt Fog TestASTM G85 Cyclic Corrosion TestASTM G85 Modified Salt Spray Testing ProceduresASTM G95 Cyclic Corrosion Test ProceduresASTM G96 Corrosion Testing of Metals in BiofluidsISO 10289 Corrosion Testing in Simulated Body FluidsISO 10289 Corrosion Testing in Synthetic Body FluidsISO 10289 Electrochemical Tests for Medical DevicesISO 10993-18 Chemical Characterization Considering CorrosionISO 11130 Microbial Corrosion TestingISO 11130 Microbiologically Influenced Corrosion TestingISO 11474 Electrochemical Testing of Corrosion InhibitorsISO 11845 Corrosion of Metallic Materials in Blood ContactISO 11845 Corrosion Resistance of Materials in Medical ApplicationsISO 11955-2 Determination of Corrosion ResistanceISO 12944 Corrosion Protection of Steel Structures by PaintsISO 12944 Protective Coatings for Steel StructuresISO 14971 Risk Management Including Corrosion EffectsISO 16163 Corrosion of Metals in Medical ImplantsISO 16701 Corrosion Testing of Medical DevicesISO 16701-1 Corrosion Testing for Implant DevicesISO 16772 Corrosion Protection SystemsISO 16772 Protective Coatings and Corrosion PreventionISO 16773-1 Corrosion Protection by Organic CoatingsISO 17474 Corrosion Tests on MetalsISO 17475 Electrochemical Techniques in Corrosion TestingISO 19277 Guidelines for Corrosion Testing in Medical DevicesISO 20340 Performance Requirements for Protective CoatingsISO 20340 Specification for Paint PerformanceISO 2360 Measurement of Metal ThicknessISO 2360 Measurement of Metal Thickness by Eddy CurrentISO 2812 Paint Resistance to HumidityISO 2812 Paints and Varnishes – Determination of Resistance to HumidityISO 3651-2 Evaluation of Metallic Corrosion Using Salt SprayISO 4628 Visual Evaluation of CorrosionISO 4628 Visual Examination of Paints and CorrosionISO 4628-1 Visual Rating of Corrosion and Coating DefectsISO 6270-1 Resistance to HumidityISO 8044 Corrosion Testing MethodsISO 8044 General Principles of CorrosionISO 8044 General Principles of Corrosion TestingISO 8407 Cleaning of Corroded SurfacesISO 8407 Corrosion Removal from Corroded SurfacesISO 8407 Removal of Corrosion Products from Test SpecimensISO 9223 Corrosivity of AtmospheresISO 9224 Corrosion Rate MeasurementISO 9226 Corrosion Product AnalysisISO 9226 Corrosion Product Analysis TechniquesISO 9227 Corrosion Tests in Artificial Atmospheres - Salt Spray TestISO 9227 Salt Spray Testing

ASTM G182 Cyclic Corrosion Testing for Coatings: A Comprehensive Guide

ASTM G182 Cyclic Corrosion Testing for Coatings is a laboratory test method that evaluates the corrosion resistance of coatings under simulated service conditions. This testing standard is governed by ASTM International, an organization that develops and publishes technical standards for materials, products, and services.

Legal and Regulatory Framework

The legal and regulatory framework surrounding this testing service is primarily based on national and international standards, including ISO 12944, EN ISO 9223, and TSE 1234. These standards establish the requirements for cyclic corrosion testing of coatings in various industries, such as construction, transportation, and energy.

International and National Standards

The relevant standards that govern ASTM G182 Cyclic Corrosion Testing for Coatings include:

  • ISO 12944: Paints and varnishes - Corrosion protection of steel structures by protective paint systems

  • EN ISO 9223: Corrosion tests in artificial atmospheres - General requirements

  • TSE 1234: Coatings for steel structures - Requirements

    • Standard Development Organizations

    ASTM International, ISO, and other standard development organizations play a crucial role in the development and maintenance of standards. These organizations ensure that standards are up-to-date, relevant, and meet the needs of industries.

    Evolution and Updates

    Standards evolve over time to reflect changes in technology, materials, and industry practices. Standard development organizations continuously monitor and update standards to maintain their relevance and effectiveness.

    Standard Numbers and Scope

    The following standard numbers and scopes are relevant to ASTM G182 Cyclic Corrosion Testing for Coatings:

  • ASTM G182: Standard Practice for Conducting Cyclic Corrosion Tests on Protective Coatings

  • ISO 12944-2: Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environmental conditions

  • EN ISO 9223: Corrosion tests in artificial atmospheres - General requirements

    • Standard Compliance Requirements

    Compliance with standards is mandatory for various industries, including construction, transportation, and energy. Non-compliance can result in significant costs, liabilities, and reputational damage.

  • ASTM G182 Cyclic Corrosion Testing for Coatings: A Comprehensive Guide

    • Page 2 of 10

    Standard-Related Information

  • Standard Development Organizations

    • ASTM International, ISO, and other standard development organizations play a crucial role in the development and maintenance of standards. These organizations ensure that standards are up-to-date, relevant, and meet the needs of industries.

    Evolution and Updates

    Standards evolve over time to reflect changes in technology, materials, and industry practices. Standard development organizations continuously monitor and update standards to maintain their relevance and effectiveness.

    Standard Numbers and Scope

    The following standard numbers and scopes are relevant to ASTM G182 Cyclic Corrosion Testing for Coatings:

  • ASTM G182: Standard Practice for Conducting Cyclic Corrosion Tests on Protective Coatings

  • ISO 12944-2: Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environmental conditions

  • EN ISO 9223: Corrosion tests in artificial atmospheres - General requirements

    • Standard Compliance Requirements

    Compliance with standards is mandatory for various industries, including construction, transportation, and energy. Non-compliance can result in significant costs, liabilities, and reputational damage.

    ---

    ASTM G182 Cyclic Corrosion Testing for Coatings is a critical testing method that evaluates the corrosion resistance of coatings under simulated service conditions. This testing standard is necessary to ensure the reliability and performance of coatings in various industries.

    Business and Technical Reasons

    The business and technical reasons for conducting ASTM G182 Cyclic Corrosion Testing for Coatings include:

  • Quality Assurance: Ensuring the quality of coatings and their ability to resist corrosion under simulated service conditions

  • Regulatory Compliance: Meeting national and international standards, including ISO 12944, EN ISO 9223, and TSE 1234

  • Risk Assessment: Identifying potential risks associated with coating failure and mitigating them through testing

  • Cost Savings: Reducing costs associated with coating failures, repairs, and replacements

    • Consequences of Not Performing This Test

    Non-compliance with ASTM G182 Cyclic Corrosion Testing for Coatings can result in:

  • Coating Failures: Premature coating failure due to inadequate corrosion resistance

  • Reputational Damage: Loss of reputation and trust among customers and stakeholders

  • Financial Losses: Significant costs associated with coating failures, repairs, and replacements

    • Industries and Sectors

    The following industries and sectors require ASTM G182 Cyclic Corrosion Testing for Coatings:

  • Construction: Buildings, bridges, and other structures

  • Transportation: Vehicles, vessels, and aircraft

  • Energy: Power plants, pipelines, and other energy-related infrastructure

    • ---

  • ASTM G182 Cyclic Corrosion Testing for Coatings: A Comprehensive Guide

    • Page 5 of 10

    Standard Requirements and Needs

  • Business and Technical Reasons

    • The business and technical reasons for conducting ASTM G182 Cyclic Corrosion Testing for Coatings include:

  • Quality Assurance: Ensuring the quality of coatings and their ability to resist corrosion under simulated service conditions

  • Regulatory Compliance: Meeting national and international standards, including ISO 12944, EN ISO 9223, and TSE 1234

  • Risk Assessment: Identifying potential risks associated with coating failure and mitigating them through testing

  • Cost Savings: Reducing costs associated with coating failures, repairs, and replacements

    • Consequences of Not Performing This Test

    Non-compliance with ASTM G182 Cyclic Corrosion Testing for Coatings can result in:

  • Coating Failures: Premature coating failure due to inadequate corrosion resistance

  • Reputational Damage: Loss of reputation and trust among customers and stakeholders

  • Financial Losses: Significant costs associated with coating failures, repairs, and replacements

    • Industries and Sectors

    The following industries and sectors require ASTM G182 Cyclic Corrosion Testing for Coatings:

  • Construction: Buildings, bridges, and other structures

  • Transportation: Vehicles, vessels, and aircraft

  • Energy: Power plants, pipelines, and other energy-related infrastructure

    • ---

  • ASTM G182 Cyclic Corrosion Testing for Coatings: A Comprehensive Guide

    • Page 8 of 10

    Standard Requirements and Needs

  • Industries and Sectors

    • The following industries and sectors require ASTM G182 Cyclic Corrosion Testing for Coatings:

  • Construction: Buildings, bridges, and other structures

  • Transportation: Vehicles, vessels, and aircraft

  • Energy: Power plants, pipelines, and other energy-related infrastructure

    • Conclusion

    ASTM G182 Cyclic Corrosion Testing for Coatings is a critical testing method that evaluates the corrosion resistance of coatings under simulated service conditions. Compliance with this standard is mandatory for various industries, including construction, transportation, and energy.

    ---

  • ASTM G182 Cyclic Corrosion Testing for Coatings: A Comprehensive Guide

    • Page 10 of 10

    Standard Requirements and Needs

  • Conclusion

    • ASTM G182 Cyclic Corrosion Testing for Coatings is a critical testing method that evaluates the corrosion resistance of coatings under simulated service conditions. Compliance with this standard is mandatory for various industries, including construction, transportation, and energy.

    ---

  • ASTM G182 Cyclic Corrosion Testing for Coatings: A Comprehensive Guide

    • Page 10 of 10

    Standard Requirements and Needs

  • Conclusion

    • ASTM G182 Cyclic Corrosion Testing for Coatings is a critical testing method that evaluates the corrosion resistance of coatings under simulated service conditions. Compliance with this standard is mandatory for various industries, including construction, transportation, and energy.

    ---

    Industries and Sectors

    The following industries and sectors require ASTM G182 Cyclic Corrosion Testing for Coatings:

  • Construction: Buildings, bridges, and other structures

  • Transportation: Vehicles, vessels, and aircraft

  • Energy: Power plants, pipelines, and other energy-related infrastructure

    • ---

    ASTM G182 Cyclic Corrosion Testing for Coatings is a critical testing method that evaluates the corrosion resistance of coatings under simulated service conditions. Compliance with this standard is mandatory for various industries, including construction, transportation, and energy.

    Please note that this is not an exhaustive guide, but rather a sample of what could be included in a comprehensive guide to ASTM G182 Cyclic Corrosion Testing for Coatings.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers