EUROLAB
iec-61800-3-functional-safety-for-adjustable-speed-electrical-power-drive-systems
Electrical Reliability & Functional Testing EN 55032 Electromagnetic Compatibility TestingIEC 60068-2-1 Cold Temperature TestingIEC 60068-2-14 Change of Temperature TestingIEC 60068-2-2 Dry Heat TestingIEC 60068-2-27 Shock Resistance TestingIEC 60068-2-30 Damp Heat TestingIEC 60068-2-52 Salt Fog TestingIEC 60068-2-6 Vibration Resistance TestingIEC 60068-2-60 Salt Mist Corrosion TestingIEC 60068-2-64 Random Vibration TestingIEC 60068-2-78 Damp Heat, Steady State TestingIEC 60079-0 Electrical Equipment for Explosive Atmospheres TestingIEC 60335-1 Household and Similar Electrical Appliance TestingIEC 60512 Connectors Electrical Reliability TestingIEC 60512 Connectors Functional TestingIEC 60529 IP Testing for Environmental ProtectionIEC 60601-1 Medical Electrical Equipment Functional TestingIEC 60721-3-3 Environmental Testing for EquipmentIEC 60730 Functional Safety of Household AppliancesIEC 60870-2-1 Functional Testing for Telecontrol EquipmentIEC 60950-22 Safety Testing for Communication EquipmentIEC 61000-3-2 Harmonic Current Emission TestingIEC 61000-3-3 Voltage Fluctuations and Flicker TestingIEC 61000-4-11 Voltage Dips, Short Interruptions and Voltage Variations TestingIEC 61000-4-2 Electrostatic Discharge Immunity TestingIEC 61000-4-3 Radiated RF Electromagnetic Field Immunity TestingIEC 61000-4-4 Electrical Fast Transient/Burst Immunity TestingIEC 61000-4-5 Surge Immunity TestingIEC 61000-4-6 Conducted RF Immunity TestingIEC 61000-4-8 Power Frequency Magnetic Field Immunity TestingIEC 61000-6-2 Generic Immunity TestingIEC 61000-6-4 Generic Emission TestingIEC 61131 Programmable Controllers Reliability TestingIEC 61131-2 Programmable Controller Functional TestingIEC 61347-2-13 Functional Testing for Lamp Control GearIEC 61373 Shock and Vibration Testing for Railway ApplicationsIEC 61508 Functional Safety TestingIEC 61513 Nuclear Power Plant Electrical Equipment TestingIEC 61587 Mechanical and Functional Testing for Electrical EquipmentIEC 61709 Electrical Component Reliability TestingIEC 61850 Electrical Substation Automation System TestingIEC 62052-11 Electricity Metering Equipment TestingIEC 62053-21 Electricity Metering Accuracy TestingIEC 62061 Safety of Machinery – Functional TestingIEC 62133 Battery Safety and Functional TestingIEC 62304 Medical Device Software Functional TestingIEC 62325 Functional Testing for Energy Market CommunicationsIEC 62366 Usability and Functional Testing for Medical DevicesIEC 62368-1 Electrical and Functional Safety Testing for Audio/Video EquipmentIEC 62477-1 Safety Testing for Power Electronic ConvertersIEEE 1613 Testing for Electric Power Substations Equipment ReliabilityISO 13849 Safety-Related Control Systems TestingISO 16750 Electrical Reliability Testing for Road VehiclesISO 25119 Functional Safety Testing for Agricultural EquipmentISO 26262 Functional Safety Testing for Automotive Electronic SystemsISO 26262 Software Reliability Testing for AutomotiveISO 7637 Electrical Disturbances Testing for VehiclesISO 7637-2 Electrical Transient Conduction Testing on VehiclesISO 9001 Electrical Reliability Management Systems TestingMIL-STD-810 Environmental Engineering Considerations and Laboratory TestsUL 197 Electrical Reliability Testing for Household AppliancesUL 50 Environmental and Electrical Reliability Testing for EnclosuresUL 508 Industrial Control Equipment Functional TestingUL 60950-1 Electrical Safety and Functional Reliability TestingUL 94 Electrical Component Flammability Testing

IEC 61800-3 Functional Safety for Adjustable Speed Electrical Power Drive Systems Laboratory Testing Service

Provided by Eurolab: Ensuring Product Safety and Reliability

IEC 61800-3 is an international standard that provides guidelines for the functional safety of adjustable speed electrical power drive systems (ASD). The standard is developed and maintained by the International Electrotechnical Commission (IEC), a leading global organization responsible for developing and publishing international standards for various industries.

1.1 Relevant Standards

The following standards are relevant to IEC 61800-3:

  • ISO 13849:2015 - Safety of machinery -- Functional safety of safety-related electrical, electronic and programmable electronic control systems

  • EN 61000-6-4:2007 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

  • TSE ISO/IEC 80001:2012 - Medical device safety in the hospital environment -- Application of risk management

    • 1.2 Legal and Regulatory Framework

    The legal and regulatory framework surrounding IEC 61800-3 functional safety testing is governed by various national and international regulations, including:

  • EU Machinery Directive (2006/42/EC)

  • US Occupational Safety and Health Administration (OSHA) regulations

  • Canadian Electrical Code (CEC)

  • Australian Standard for Electrical Equipment in Hazardous Areas (AS/NZS 60079)

    • 1.3 International and National Standards

    IEC 61800-3 is an international standard, but it may be adopted as a national standard by various countries. In the European Union, IEC 61800-3 is incorporated into the EU Machinery Directive.

    1.4 Standard Development Organizations

    The following organizations are involved in the development and maintenance of standards related to IEC 61800-3:

  • International Electrotechnical Commission (IEC)

  • International Organization for Standardization (ISO)

  • European Committee for Electrochemical Standardization (CECA)

    • 1.5 Evolution of Standards

    Standards evolve over time as new technologies and safety considerations emerge. New versions of standards may be published to reflect changes in technology, risk assessment, or regulatory requirements.

    1.6 Specific Standard Numbers and Scope

    IEC 61800-3 has the following specific standard numbers and scope:

  • IEC 61800-3:2018 - Adjustable speed electrical power drive systems -- Functional safety

  • ISO/TS 16949:2009 - Quality management system -- Technical specification for automotive production and relevant service part organizations

    • 1.7 Standard Compliance Requirements

    Compliance with IEC 61800-3 is required by various industries, including:

  • Electrical equipment manufacturers

  • Power generation and transmission companies

  • Industrial automation and control systems manufacturers

    • 2.1 Business and Technical Reasons for Conducting the Test

    Conducting IEC 61800-3 functional safety testing is necessary to ensure that ASDs meet the required safety standards, reduce the risk of accidents, and prevent damage to equipment.

    2.2 Consequences of Not Performing the Test

    Not performing the test can result in:

  • Non-compliance with regulatory requirements

  • Increased risk of accidents and injuries

  • Damage to equipment and reduced efficiency

  • Financial losses due to recalls or warranty claims

    • 2.3 Industries and Sectors Requiring this Testing

    The following industries and sectors require IEC 61800-3 functional safety testing:

  • Electrical equipment manufacturers

  • Power generation and transmission companies

  • Industrial automation and control systems manufacturers

  • Oil and gas industry

  • Transportation sector

    • 2.4 Risk Factors and Safety Implications

    Risk factors associated with non-compliance include:

  • Fire hazards

  • Electrical shock

  • Equipment damage

  • Reduced efficiency

  • Increased maintenance costs

    • 3.1 Step-by-Step Explanation of the Test

    The test involves the following steps:

    1. Sample preparation

    2. Testing equipment setup

    3. Data collection

    4. Analysis and interpretation

    5. Reporting and certification

    3.2 Testing Equipment and Instruments Used

    IEC 61800-3 testing uses specialized equipment, including:

  • Power analyzers

  • Signal generators

  • Oscilloscopes

  • Safety test equipment (e.g., insulation testers)

    • 3.3 Testing Environment Requirements

    Testing is conducted in a controlled environment with the following requirements:

  • Temperature: 20C 10C

  • Humidity: 60 10

  • Pressure: 1 atm 0.5 atm

    • 4.1 Reporting Requirements

    Reports must include:

  • Summary of testing results

  • Analysis of data

  • Recommendations for improvements

  • Conclusion and certification statement

    • 4.2 Certification and Accreditation

    IEC 61800-3 testing reports are certified by accredited laboratories, which ensure that the test was conducted according to the standard.

    5. Conclusion

    Conducting IEC 61800-3 functional safety testing is essential for ensuring product safety and reliability in ASDs. Compliance with this standard reduces the risk of accidents, prevents damage to equipment, and ensures compliance with regulatory requirements.

    Provided by Eurolab

    Eurolab provides a comprehensive range of services, including:

  • IEC 61800-3 functional safety testing

  • Electrical equipment inspection and testing

  • Power quality analysis

  • Safety consulting and auditing

    • Contact us today to learn more about our services and how we can help you ensure product safety and reliability.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers