EUROLAB
iec-62321-6-analysis-of-hexavalent-chromium-in-electronic-devices
RoHS Compliance Testing EN 50581 Technical Documentation for RoHS ComplianceEN 62321-1 Sampling and Sample Preparation for RoHS TestingEN 62321-1 Sampling and Sample Preparation for RoHS TestingEN 62321-4 Determination of Cadmium and Lead Content in PlasticsEN 62321-5 Analysis of Mercury in Electrical ComponentsEN 62321-5 Mercury Analysis in Lighting ProductsEN 62321-6 Hexavalent Chromium in Metal CoatingsEN 62321-7-2 PBDEs Determination in PlasticsEN 62321-8 Screening of Flame Retardants in Electronic EnclosuresEPA Method 3050B Acid Digestion for RoHS SubstancesIEC 62321-1 Sampling Techniques for RoHS ComplianceIEC 62321-2 Mercury Analysis in Electrical LampsIEC 62321-2 Mercury Content Analysis in BatteriesIEC 62321-2 Mercury Determination by Atomic Absorption SpectrometryIEC 62321-2 Mercury Determination in LampsIEC 62321-2 Mercury Testing in BatteriesIEC 62321-3-1 Cadmium Determination in Consumer ElectronicsIEC 62321-3-1 Cadmium Determination in Solder PasteIEC 62321-3-1 Determination of Cadmium in Electrical and Electronic ProductsIEC 62321-3-1 Determination of Heavy Metals in Solder MaterialsIEC 62321-3-2 Lead Content Determination in PCBsIEC 62321-3-2 Lead Content in Connectors and CablesIEC 62321-3-2 Lead Determination by Inductively Coupled Plasma Optical Emission SpectrometryIEC 62321-4 Cadmium Content Analysis in Consumer ElectronicsIEC 62321-4 Cadmium Content Determination in SolderIEC 62321-4 Cadmium Determination in Plastic HousingIEC 62321-4 Determination of Lead in Electronic ComponentsIEC 62321-4 Determination of Lead in Electronics ComponentsIEC 62321-5 Determination of Mercury in Electronic MaterialsIEC 62321-5 Mercury Analysis in SwitchgearIEC 62321-5 Mercury Content in Switches and RelaysIEC 62321-5 Mercury Determination in Electrical ContactsIEC 62321-6 Chromium VI Analysis in Coatings and PaintsIEC 62321-6 Chromium VI Analysis in Metal PartsIEC 62321-6 Chromium VI Analysis in Surface CoatingsIEC 62321-6 Determination of Chromium VI Content in CoatingsIEC 62321-6 Hexavalent Chromium in Metal PartsIEC 62321-7-1 Determination of PBBs and PBDEs by GC-MSIEC 62321-7-1 Determination of Polybrominated Biphenyls (PBBs)IEC 62321-7-1 PBBs and PBDEs Screening in Electronic AssembliesIEC 62321-7-1 PBBs and PBDEs Testing in Electronic DevicesIEC 62321-7-2 Determination of Polybrominated Diphenyl Ethers (PBDEs)IEC 62321-7-2 PBDEs Analysis in Plastic PartsIEC 62321-7-2 PBDEs Determination in Printed Circuit BoardsIEC 62321-8 Screening for Brominated Flame Retardants by XRFIEC 62321-8 Screening for Brominated Flame Retardants in PlasticsIEC 62321-8 Screening for Flame Retardants by XRF SpectrometryIEC 62321-8 Screening of Flame Retardants in Electrical EquipmentRoHS 3 Amendment Testing for Four Phthalates (DEHP, BBP, DBP, DIBP)RoHS Compliance Analysis of Power Supply UnitsRoHS Compliance Test for LED Lighting ProductsRoHS Compliance Testing for Electrical Wiring MaterialsRoHS Compliance Testing for Medical Electrical EquipmentRoHS Compliance Testing of Audio and Video EquipmentRoHS Compliance Testing of Household Kitchen AppliancesRoHS Compliance Testing of Industrial Electrical EquipmentRoHS Compliance Testing of Lighting FixturesRoHS Compliance Testing of Portable Electronic DevicesRoHS Directive 2011/65/EU Restricted Substance TestingRoHS Testing for Automotive Electronic ComponentsRoHS Testing of Audio Amplifiers and SpeakersRoHS Testing of Automotive Lighting ComponentsRoHS Testing of Batteries and AccumulatorsRoHS Testing of Computer and Peripheral DevicesRoHS Testing of Consumer Electronics and GadgetsRoHS Testing of Consumer Household AppliancesRoHS Testing of Electric Vehicle ComponentsRoHS Testing of Electrical Connectors and SwitchesRoHS Testing of Electronic Toys and GamesRoHS Testing of HVAC and Refrigeration ComponentsRoHS Testing of Lighting Ballasts and DriversRoHS Testing of Networking and Communication EquipmentRoHS Testing of Plastic Components in ElectronicsRoHS Testing of Power Tools and Handheld DevicesRoHS Testing of Printed Circuit Boards (PCB)RoHS Testing of Smart Home Devices and SensorsRoHS Testing of Solar Panels and Photovoltaic EquipmentRoHS Testing of Telecom Equipment ComponentsRoHS Testing of Wireless Communication Devices

Comprehensive Guide to IEC 62321-6 Analysis of Hexavalent Chromium in Electronic Devices Laboratory Testing Service Provided by Eurolab

IEC 62321-6 is a globally recognized standard for the analysis of hexavalent chromium in electronic devices. This standard is part of the IEC 62321 series, which provides guidelines for the testing and assessment of substances in electrical and electronic equipment. The IEC 62321-6 standard specifies the methods for determining the concentration of hexavalent chromium (Cr(VI)) in various types of electronic devices.

Legal and Regulatory Framework

The analysis of hexavalent chromium in electronic devices is governed by several laws and regulations worldwide. Some of the key regulatory frameworks include:

  • RoHS Directive 2015/863/EU: Restriction of Hazardous Substances in Electrical and Electronic Equipment

  • WEEE Directive 2012/19/EU: Waste Electrical and Electronic Equipment Directive

  • EU Chemicals Regulation (EC) No. 1907/2006: Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH)

  • California Proposition 65: Safe Drinking Water and Toxic Enforcement Act of 1986

    • These regulations aim to reduce the levels of hazardous substances in electronic devices and promote sustainable waste management practices.

    International and National Standards

    The following standards are relevant to IEC 62321-6 Analysis of Hexavalent Chromium in Electronic Devices:

  • ISO/IEC 17025: General requirements for the competence of testing and calibration laboratories

  • ASTM E2980: Standard Test Method for Determination of Hexavalent Chromium in Electronic Devices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)

  • EN 71: Safety of Toys - Particular Safety Requirements

    • These standards provide a framework for testing and assessment, ensuring that electronic devices meet the required safety and performance standards.

    Standard Development Organizations

    Several organizations contribute to the development and maintenance of standards related to IEC 62321-6 Analysis of Hexavalent Chromium in Electronic Devices:

  • International Electrotechnical Commission (IEC): Develops and publishes international standards for electrical and electronic equipment

  • European Committee for Standardization (CEN): Develops and publishes European standards for various industries, including electronics

  • American Society for Testing and Materials (ASTM): Develops and publishes standards for testing and assessment of materials and products

    • Standard Evolution and Updates

    Standards undergo periodic reviews and updates to reflect changes in technology, regulatory requirements, or scientific understanding. The IEC 62321-6 standard has undergone several revisions since its initial publication in 2008.

    Specific Standard Numbers and Scope

    IEC 62321-6:2011 specifies the methods for determining the concentration of hexavalent chromium (Cr(VI)) in various types of electronic devices, including:

  • ICs and discretes

  • Semiconductors

  • Passive components

  • Printed wiring boards

    • Industry-Specific Requirements

    Different industries have varying requirements for IEC 62321-6 Analysis of Hexavalent Chromium in Electronic Devices testing:

  • Automotive industry: Required to comply with EU RoHS Directive and EU Chemicals Regulation (EC) No. 1907/2006

  • Electronics industry: Must meet global standards, including ISO/IEC 17025 and IEC 62321-6

    • Standard Compliance Requirements

    To ensure compliance with regulations and industry-specific requirements, electronic device manufacturers must:

    1. Conduct regular testing for hexavalent chromium (Cr(VI)) using IEC 62321-6 compliant methods.

    2. Maintain records of testing results and documentation.

    3. Update their product designs to minimize the use of hazardous substances.

    This section provides an overview of the standard-related information required for IEC 62321-6 Analysis of Hexavalent Chromium in Electronic Devices laboratory testing service provided by Eurolab.

    Please proceed to the next section, Standard Requirements and Needs, where we will discuss why this specific test is needed and required.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers