EUROLAB
iso-15587-6-cadmium-determination
Inorganic & Heavy Metal Screening EPA 1631 Mercury in Water by Oxidation and CVAFSEPA 1631E Mercury by CVAFSEPA 200.1 Copper AnalysisEPA 200.1 Copper by Atomic AbsorptionEPA 200.1 Determination of CopperEPA 200.2 Analysis of Metals by ICP-AESEPA 200.2 Metals Analysis by GFAAEPA 200.2 Metals in WastewaterEPA 200.3 Metals Analysis by ICP-AESEPA 200.3 Metals by ICP-AESEPA 200.5 Determination of Metals by GFAAEPA 200.5 Metals by GFAAEPA 200.7 ICP-AES for Trace Metals AnalysisEPA 200.7 ICP-AES Trace MetalsEPA 200.7 Metals by ICP-AESEPA 200.7 Rev.4 ICP-AES for Trace MetalsEPA 200.8 ICP-MS for Metal SpeciationEPA 200.8 Metals Analysis by ICP-MSEPA 200.8 Metals by ICP-MSEPA 200.9 Metals by ICP-AESEPA 200.9 Trace Metals in Drinking WaterEPA 215.1 Determination of SeleniumEPA 218.5 Determination of ArsenicEPA 218.6 Antimony DeterminationEPA 218.6 Determination of AntimonyEPA 218.7 Antimony DeterminationEPA 245.1 Mercury AnalysisEPA 245.1 Mercury Analysis by Cold Vapor Atomic AbsorptionEPA 245.6 Mercury by CVAFSEPA 245.7 Mercury by ICP-MSEPA 300.0 Metals in Wastewater by ICP-AESEPA 6010C Metals AnalysisEPA 6010C Metals by ICP-AESEPA 6010D ICP-AES Method for MetalsEPA 6010D Metals by ICP-AESISO 11466 Extraction of Metals from SolidsISO 11466 Microwave Assisted Acid Digestion for Metal AnalysisISO 11868 Determination of Nickel in WaterISO 11885 ICP-OES for Multi-element AnalysisISO 11885 Trace Elements by ICP-OESISO 11929 Detection Limits for Trace MetalsISO 11929 Determination of Detection Limits for MetalsISO 11969 Chromium SpeciationISO 11969 Chromium SpeciationISO 12393 Sample Preparation for Metals AnalysisISO 12846 Determination of Mercury by CVAASISO 14911 Lead Determination in WaterISO 15586 Arsenic by Hydride Generation AASISO 15586 Arsenic DeterminationISO 15587-1 Determination of Metals by Atomic Absorption SpectrometryISO 15587-2 Atomic Absorption Spectrometry for MetalsISO 15587-3 Analysis of Lead in WaterISO 15587-4 Cadmium DeterminationISO 15587-5 Lead DeterminationISO 15705 Chromium DeterminationISO 16132 Determination of IronISO 16132 Determination of Iron in WaterISO 16132 Iron DeterminationISO 16224 Analysis of Mercury in WaterISO 16224 Determination of MercuryISO 16255 Cadmium DeterminationISO 16259 Bismuth DeterminationISO 17294-2 Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for MetalsISO 17294-3 Sample Preparation for ICP-MSISO 17294-4 ICP-MS Method for Metal SpeciationISO 17294-5 Sample Preparation for ICP-OESISO 17294-6 Sample Preparation for Trace MetalsISO 17294-7 Sample Preparation for ICP-MSISO 17852 Analysis of Zinc in WaterISO 17852 Determination of Zinc

Comprehensive Guide to ISO 15587-6 Cadmium Determination Laboratory Testing Service Provided by Eurolab

ISO 15587-6 is a laboratory testing standard that outlines the requirements for determining cadmium in various materials, including metals, alloys, and compounds. This standard is part of the ISO 15587 series, which covers the determination of toxic elements in various matrices.

Relevant Standards

  • ISO 15587-6:2007(E) - Determination of cadmium

  • ASTM D5712-08(2013)e1 - Standard Test Methods for Analysis of Aluminum and Aluminum Alloys by Energy Dispersive X-Ray Fluorescence Spectroscopy (EDS)

  • EN 14118:2014 - Aluminium and aluminium alloys. Determination of cadmium content

  • TSE (Turkish Standards Institution) ISO/TS 15587-6:2007(E) - Cadmiyumun Belirlenmesi

    • Standard Development Organizations

    The International Organization for Standardization (ISO) is responsible for the development, maintenance, and publication of standards related to laboratory testing. The American Society for Testing and Materials (ASTM) and the European Committee for Standardization (CEN) also contribute to the development of standards in this area.

    Legal and Regulatory Framework

    Laboratory testing standards like ISO 15587-6 are essential for ensuring compliance with legal and regulatory requirements. These regulations often specify the maximum allowed levels of cadmium in various materials, and laboratory testing is necessary to verify that these limits are not exceeded.

    International and National Standards

    ISO 15587-6 is an international standard that has been adopted by many countries. However, national standards may also be applicable depending on local regulations and requirements.

  • In the European Union (EU), EN 14118:2014 is the relevant standard for determining cadmium in aluminium alloys.

  • In Turkey, TSE ISO/TS 15587-6:2007(E) is the standard for cadmium determination.

    • Standard Compliance Requirements

    Compliance with laboratory testing standards like ISO 15587-6 is essential for various industries, including:

  • Aerospace

  • Automotive

  • Chemicals

  • Construction

  • Electronics

    • These industries often require certification or compliance with relevant regulations to ensure product safety and reliability.

    ---

    Why this Specific Test is Needed and Required

    ISO 15587-6 Cadmium Determination testing is essential for ensuring the safety of products containing aluminium alloys. Cadmium is a toxic element that can pose serious health risks, especially in cases where it is present in high concentrations.

    Business and Technical Reasons for Conducting ISO 15587-6 Cadmium Determination Testing

    Conducting this test helps manufacturers and suppliers to:

  • Verify compliance with regulatory requirements

  • Ensure product safety and reliability

  • Prevent environmental pollution

  • Enhance customer confidence

    • Consequences of Not Performing this Test

    Failure to perform ISO 15587-6 Cadmium Determination testing can lead to serious consequences, including:

  • Non-compliance with regulations

  • Product recall or withdrawal from the market

  • Damage to reputation and brand image

  • Financial losses due to regulatory fines or penalties

    • Industries and Sectors that Require this Testing

    The following industries and sectors require ISO 15587-6 Cadmium Determination testing:

  • Aerospace (aluminium alloys used in aircraft construction)

  • Automotive (aluminium alloys used in vehicle bodywork and components)

  • Chemicals (catalysts, pigments, and other chemicals containing aluminium)

  • Construction (building materials, including aluminium alloys)

  • Electronics (circuit boards, connectors, and other electronic components)

    • ---

    Step-by-Step Explanation of the Test

    The following is a step-by-step explanation of the ISO 15587-6 Cadmium Determination testing process:

    1. Sample Preparation: The sample to be tested must be prepared according to the standards requirements.

    2. Instrument Calibration: The instrument used for measurement (e.g., Energy Dispersive X-Ray Fluorescence Spectrometer) must be calibrated before testing.

    3. Measurement: The test is conducted by measuring the cadmium content in the sample using an Energy Dispersive X-Ray Fluorescence Spectrometer.

    4. Data Analysis: The measured data is analyzed to determine the cadmium content.

    Testing Equipment and Instruments

    The following equipment and instruments are used for ISO 15587-6 Cadmium Determination testing:

  • Energy Dispersive X-Ray Fluorescence Spectrometer (EDS)

  • Sample preparation equipment (e.g., grinder, crusher)

    • ---

    How Test Results are Documented and Reported

    The test results are documented and reported in a clear and concise manner. The report includes:

  • Test Summary: A brief summary of the testing performed.

  • Results: The cadmium content measured in the sample.

  • Conclusion: An interpretation of the test results, including any relevant information.

    • Regulatory Requirements for Reporting

    The reporting requirements vary depending on the regulatory body and industry. However, in general, reports must include:

  • Test summary

  • Results

  • Conclusion

    • ---

    This is a comprehensive guide to ISO 15587-6 Cadmium Determination laboratory testing service provided by Eurolab. For more information about this service or to schedule a test, please contact our experts at insert contact details.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers