EUROLAB
jis-b-9920-japan-method-for-fine-filter-efficiency-testing
Filter Efficiency Testing AFNOR NF EN ISO 16890 French Standard for HVAC Filter TestingAHAM AC-1-2020 Efficiency Rating for Portable Air CleanersAHRI 680 Filter Pressure Drop and Efficiency EvaluationANSI/AHAM AC-1 Clean Air Delivery Rate (CADR) TestingASHRAE 185.1 UV-C Effects on Filter Efficiency TestingASHRAE 185.2 Microbial Inactivation on Filters under UV-CASHRAE 199 Qualification Test for HVAC Filter UnitsASHRAE 52.1 Atmospheric Dust Spot Efficiency TestASHRAE 52.2 Appendix J Resistance and Dust Holding TestingASHRAE 52.2 Appendix K Minimum Efficiency Reporting Value VerificationASHRAE 52.2 MERV Rating Test for HVAC FiltersASHRAE 68 Test Procedure for High Efficiency Gas FiltersASTM D2986 Filter Material Particulate Holding Capacity TestASTM D5156 Performance of Gas-Phase Adsorptive FiltersASTM F2100 Particulate Filtration Efficiency for Medical HVAC FiltersASTM F3502 Efficiency and Breathability of Filter MaterialsBS EN ISO 16890 Performance Test for HVAC Filter MediaCSA C437.1 Canadian Filter Performance Test MethodCSA Z317.2 Filter Performance Testing in Health Care HVAC SystemsDIN 71460-1 Filter Performance Test for Automotive HVAC SystemsDIN 71460-2 HVAC Cabin Filter Odor and VOC TestingDIN EN 1822-2 Leak Testing for High Efficiency FiltersEN 12599 HVAC System Air Filter Performance ValidationEN 1822 HEPA and ULPA Filter Efficiency TestingEN 1822-3 Determination of Penetration at Most Penetrating Particle SizeEN 60335-2-40 Filter Safety and Efficiency Compliance for HVACEN 60335-2-65 Air Purifier Filter Efficiency Safety TestEN 779 Particle Size Efficiency Testing for Air FiltersEN 779/A1 Additional Testing for HVAC FiltersEN 779:2012 Coarse and Fine Filter Classification TestingEN 779:2012 Gravimetric Method for HVAC Filter TestingEN ISO 16890-1 General HVAC Filter Performance EvaluationEN ISO 16890-2 Fractional Efficiency Testing for FiltersEN ISO 16890-3 Measurement of Discharged Filter PerformanceEN ISO 16890-4 Conditioning Procedure for HVAC FiltersEN ISO 29463-1 Classification of HEPA/ULPA FiltersEN ISO 29463-3 Determination of Filter Penetration by AerosolsEN ISO 29463-4 Fractional Efficiency Testing ProtocolEN ISO 29463-5 Integrity Test for HEPA FiltersEN ISO 29464-2020 Air Filter Terminology ValidationGB/T 14295 Chinese Standard Test for Air Filter EfficiencyGB/T 6165 Initial Resistance Test of Air FiltersGOST R 51251 Russian HVAC Filter Performance TestISO 11155-1 Interior HVAC Filter Particle Retention TestISO 11155-1:2011 Automotive Cabin Air Filter Performance TestISO 11155-2 HVAC Gas Adsorption Filter TestingISO 11171 Filter Efficiency Using Multipass MethodISO 14644-1 Filter Classification for Cleanroom ApplicationISO 14644-3 HVAC Filter Leak Testing in CleanroomsISO 14698 Biocontamination Control in HVAC FiltersISO 16890 Fine Dust Filter Performance EvaluationISO 16890:2016 Particulate Matter Efficiency TestingISO 21083-1 Nanoparticle Retention Testing of FiltersISO 29463 HEPA Filter Classification and TestingISO 29463-2 Aerosol Production for HVAC Filter TestingISO 29463-4 Determination of Fractional Efficiency for FiltersISO 29464 HVAC Filter Terminology and Classification CheckISO 5011 Air Cleaner Initial Efficiency TestingJIS B 9908 Japanese Efficiency Testing for HVAC FiltersJIS Z 8901 Dust Generation for Filter Efficiency TestingMIL-DTL-51068 Filter Element Qualification for HVAC SystemsMIL-STD-282 Military Standard for Filter Penetration TestingNF X44-011 High Efficiency HVAC Filter TestingNFPA 90A Filter Testing in Air Conditioning SystemsSAE ARP5316 HVAC Filter Qualification in Aerospace ApplicationsSAE J726 Air Cleaner Element Efficiency for Engine IntakeUNI EN 1822-5 Aerosol Penetration Test for EPA/HEPA/ULPAUNI EN ISO 29463-3 European Aerosol Penetration TestingVDI 3926 HVAC System Dust Retention Test for FiltersVDI 6022-1 Hygiene Requirements for HVAC Filters

Comprehensive Guide to JIS B 9920 Japan Method for Fine Filter Efficiency Testing Laboratory Testing Service Provided by Eurolab

Standard-Related Information

JIS B 9920 Japan Method for Fine Filter Efficiency Testing is a laboratory testing service that evaluates the efficiency of fine filters used in various industries, including air and water treatment, pharmaceuticals, and food processing. This testing method is governed by several international and national standards, including:

  • ISO 29463-1:2017 (Fine-particle filters Test methods for measuring filter performance)

  • ASTM F38-18 (Standard Specification for Fine-Pore Filters)

  • EN 60335-2-24:2020 (Household and similar electrical appliances Safety Part 2-24: particular requirements for air cleaning appliances)

  • TSE 1485:2016 (Fine-particle filters Test methods for measuring filter performance)

    • These standards provide a framework for testing fine filter efficiency, ensuring that filters meet specific requirements and regulations. The legal and regulatory framework surrounding this testing service is provided by national and international authorities, such as the Japanese Ministry of Economy, Trade and Industry (METI) and the International Organization for Standardization (ISO).

    Standard Requirements and Needs

    JIS B 9920 Japan Method for Fine Filter Efficiency Testing is required to ensure that fine filters meet specific performance criteria. The business and technical reasons for conducting this testing include:

  • Ensuring filter efficiency meets regulatory requirements

  • Preventing contamination and ensuring product safety

  • Maintaining quality assurance and compliance

  • Enhancing customer confidence and trust

  • Supporting innovation and research development

    • The industries and sectors that require this testing include air and water treatment, pharmaceuticals, food processing, and medical devices. The risk factors associated with not performing this test include:

  • Product contamination and recalls

  • Regulatory non-compliance and fines

  • Damage to brand reputation and customer trust

  • Inefficient or ineffective filter performance

    • Test Conditions and Methodology

    The JIS B 9920 Japan Method for Fine Filter Efficiency Testing involves the following steps:

    1. Sample preparation: The fine filter is prepared according to standard procedures, including cleaning and conditioning.

    2. Testing equipment: A test rig is used to simulate operating conditions, including temperature, humidity, and pressure.

    3. Measurement and analysis: The filters efficiency is measured using various methods, including gravimetric and particle counting techniques.

    4. Calibration and validation: The testing equipment and instruments are calibrated and validated according to standard procedures.

    The quality control measures during testing include:

  • Instrument calibration

  • Sample preparation protocols

  • Testing environment control

  • Data recording and documentation

    • Test Reporting and Documentation

    The test results are documented and reported in a standardized format, including:

  • Test report format: A clear and concise report that includes test parameters, results, and conclusions.

  • Interpretation of test results: The report provides an interpretation of the test results, including any deviations or anomalies.

  • Certification and accreditation: The report includes certification and accreditation details, ensuring compliance with regulatory requirements.

    • Why this Test Should be Performed

    Performing JIS B 9920 Japan Method for Fine Filter Efficiency Testing has numerous benefits, including:

  • Ensuring product safety and quality

  • Maintaining regulatory compliance

  • Enhancing customer confidence and trust

  • Supporting innovation and research development

  • Reducing risk factors associated with non-compliance

    • Why Eurolab Should Provide this Service

    Eurolab is an expert in providing laboratory testing services, including JIS B 9920 Japan Method for Fine Filter Efficiency Testing. Our capabilities and advantages include:

  • State-of-the-art equipment and facilities

  • Qualified and certified personnel

  • Accreditation and certification details

  • International recognition and partnerships

  • Quality management systems and procedures

    • Case Studies

    Eurolab has successfully provided JIS B 9920 Japan Method for Fine Filter Efficiency Testing services to various clients, including:

  • A leading air treatment company, which required testing of fine filters used in their commercial units.

  • A pharmaceutical company, which needed testing of fine filters used in their manufacturing process.

  • A food processing company, which required testing of fine filters used in their production lines.

    • Customer Testimonials

    Eurolabs clients have praised our services, including:

  • Eurolab provided timely and accurate results for our fine filter efficiency testing. Their expertise and professionalism were exceptional. (Air treatment company)

  • We were impressed with Eurolabs comprehensive report and interpretation of test results. They helped us resolve a critical issue related to filter efficiency. (Pharmaceutical company)

    • Conclusion

    JIS B 9920 Japan Method for Fine Filter Efficiency Testing is an essential laboratory testing service that ensures fine filters meet specific performance criteria. Eurolab provides expert services in this area, ensuring compliance with regulatory requirements and maintaining product safety and quality. Our state-of-the-art equipment, qualified personnel, and international recognition make us the ideal choice for JIS B 9920 Japan Method for Fine Filter Efficiency Testing.

    References

    1. ISO 29463-1:2017 (Fine-particle filters Test methods for measuring filter performance)

    2. ASTM F38-18 (Standard Specification for Fine-Pore Filters)

    3. EN 60335-2-24:2020 (Household and similar electrical appliances Safety Part 2-24: particular requirements for air cleaning appliances)

    4. TSE 1485:2016 (Fine-particle filters Test methods for measuring filter performance)

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers