EUROLAB
ashrae-128-thermal-performance-verification-of-terminal-units
Thermal Performance Testing AHRI 1060 Thermal Test of Air-to-Air Energy Recovery VentilatorsAHRI 1061 Testing for Thermal Transfer of Liquid CoolersAHRI 1160 Testing of Mini-Split HVAC Thermal ResponseAHRI 1230 Thermal and Moisture Removal Performance of VRF UnitsAHRI 1232 Integrated Thermal Load Test of Modular HVAC SystemsAHRI 1250 Testing Variable Speed Units for Thermal OutputAHRI 210-240 Capacity Test Under Thermal Load ConditionsAHRI 210/240 Thermal Testing for Unitary Air-Conditioning UnitsAHRI 410 Thermal Capacity Testing for Liquid-Chilling PackagesAHRI 440 Fan Coil Units Thermal Output TestingAHRI 870 Testing for Thermal Characteristics of Service CoilsAHRI 920 Thermal Testing for Dedicated Outdoor Air SystemsANSI/AHRI 340/360 Thermal Evaluation of Commercial HVAC UnitsANSI/AHRI 550/590 Chiller Thermal Load and Efficiency TestingANSI/ASHRAE 183 Internal Thermal Loads in HVAC System TestingANSI/ASHRAE 93 Thermal Testing for Solar Air Heating CollectorsASHRAE 116 Thermal Load Cycling Test for Room Air ConditionersASHRAE 137 Measurement of Thermal Input in HVAC AppliancesASHRAE 207 Dynamic Thermal Response of HVAC Controls TestingASHRAE 33 Standard for Thermal Performance of Duct HeatersASHRAE 37 Standard Thermal Output Testing for Air-Handling UnitsASHRAE 41.1 Calorimeter-Based Thermal Capacity MeasurementASHRAE 41.2 Airflow and Thermal Heat Gain Testing for HVAC UnitsASHRAE 41.6 HVAC Equipment Calorimetric Thermal Test MethodsASHRAE 41.9 Radiative Thermal Output Testing in HVAC UnitsASHRAE 84 Standard for Thermal Effectiveness in Air StreamsASHRAE 90.1 Compliance Thermal Efficiency Testing of HVAC UnitsASHRAE 93 Standard Thermal Performance Testing of HVAC CoilsASHRAE SPC 41P In-Situ Thermal Capacity Field Testing MethodsEN 1048 Plate Heat Exchanger Thermal Efficiency EvaluationEN 12101 HVAC Thermal Effectiveness in Smoke Control SystemsEN 12102 Acoustic and Thermal Performance Test in Ducted SystemsEN 1216 Thermal Performance for Radiators and ConvectorsEN 12354 Thermal Bridge Effect Measurement in HVAC SystemsEN 13215 Thermal Performance Measurement for ChillersEN 1397 Heat Exchanger Thermal Transfer Efficiency TestingEN 14511 Thermal Performance Test for Packaged Air ConditionersEN 14511-2 Testing Thermodynamic Performance of Heat PumpsEN 14511-4 Additional Thermal Testing for Comfort Cooling UnitsEN 14825 Seasonal COP Testing for Reversible Heat PumpsEN 14825 Seasonal Efficiency Thermal Test of HVAC SystemsEN 15241 Internal Thermal Comfort vs System Output TestingEN 15316 HVAC System Component Thermal Energy Efficiency TestingEN 255 Thermal Efficiency Testing of Heat Pump Water HeatersEN 308 Heat Recovery Ventilator Thermal Efficiency EvaluationEN 308-2016 Thermal Efficiency of Heat Recovery Devices TestingISO 10211 Heat Transfer Simulation for Thermal Testing SupportISO 11855 Floor Heating Thermal Performance EvaluationISO 12569 Thermal Performance Air Leakage and Ventilation TestingISO 12572 Moisture Transfer & Thermal Behavior Combined TestingISO 13256 Thermal Testing of Water-Source Heat PumpsISO 13256-2 Geothermal Heat Pump Thermal Efficiency TestingISO 13313 Thermal Test of Liquid-to-Air Heat ExchangersISO 15099 Thermal Performance Simulation Support Test ProtocolsISO 16358 Thermal Seasonal Performance Factor MeasurementISO 16890-1 Filter Efficiency and Thermal Influence AnalysisISO 16890-3 Combined Efficiency and Thermal Test of FiltersISO 16890-Based Thermal Testing for HVAC System ComponentsISO 5151 Thermal Load Test of Non-Ducted Air ConditionersISO 5801 Air Handling Unit Thermal-Aerodynamic Combined TestingISO 7730 Thermal Comfort Assessment Through System TestingISO 9614 Thermal Impact Analysis via Sound Power MeasurementISO 9869-1 Thermal Resistance Testing of Building Components

ASHRAE 128 Thermal Performance Verification of Terminal Units Laboratory Testing Service: A Comprehensive Guide

ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) Standard 128, Thermal Performance Verification of Terminal Units, provides a comprehensive framework for testing the thermal performance of terminal units. This standard is essential for ensuring that terminal units meet specific requirements for energy efficiency, safety, and environmental sustainability.

Relevant Standards

  • ISO (International Organization for Standardization): ISO 5167-1:2016 (Measurement of fluid flow by means of pressure-differential devices attached to pipe)

  • ASTM (American Society for Testing and Materials): ASTM C168:2019 (Standard Terminology Relating to Mechanical Test Equipment)

  • EN (European Committee for Standardization): EN 1333:2020 (Terminal units, air-handling units, fan coils and other similar units - Classification, requirements and testing)

  • TSE (Turkish Standards Institution): TS 1615-2019 (Terminal Units, Air-Handling Units, Fan Coils, and Other Similar Units - Classification, Requirements, and Testing)

    • Legal and Regulatory Framework

    The ASHRAE 128 standard is widely adopted by various industries, including HVAC (Heating, Ventilation, and Air Conditioning), refrigeration, and building services. Compliance with this standard is mandatory for terminal unit manufacturers, suppliers, and installers.

    International and National Standards

    ASHRAE Standard 128 has undergone several revisions to reflect changes in technology, testing methods, and industry practices. The current version of the standard (2019) includes updates on:

  • New testing requirements for energy efficiency

  • Revised procedures for measuring thermal performance

  • Enhanced requirements for safety and environmental sustainability

    • Standard Development Organizations

    ASHRAE is a leading developer of standards for the HVAC industry. ASHRAEs standards development process involves collaboration with experts from various industries, governments, and international organizations.

    Evolution of Standards

    Standards evolve in response to technological advancements, changing regulatory requirements, and emerging trends in the industry. ASHRAE 128 has undergone several revisions since its initial publication in 2008.

    Standard Numbers and Scope

    ASHRAE Standard 128 covers:

  • Terminal units with a capacity of 15 kW (51,000 Btu/h) or less

  • Terminal units with a nominal water flow rate of 50 l/min (13.2 gpm) or more

    • Industry-Specific Compliance Requirements

    Terminal unit manufacturers and suppliers must comply with ASHRAE 128 in various industries:

  • Commercial buildings: compliance is required for energy efficiency, safety, and environmental sustainability

  • Residential buildings: compliance is recommended for energy efficiency and environmental sustainability

  • Industrial processes: compliance may be required by regulatory authorities or industry associations

    • Why ASHRAE 128 Thermal Performance Verification of Terminal Units Testing is Needed

    The thermal performance verification of terminal units is essential to ensure that these critical components meet specific requirements for energy efficiency, safety, and environmental sustainability. Failure to comply with ASHRAE 128 can result in:

  • Inefficient energy consumption

  • Safety risks due to inadequate thermal performance

  • Environmental degradation due to increased carbon emissions

    • Business and Technical Reasons

    ASHRAE 128 testing is required by regulatory authorities, industry associations, and customers who demand high-quality products. This testing ensures that terminal units meet specific requirements for:

  • Energy efficiency: ASHRAE 128 specifies minimum energy efficiency standards for terminal units

  • Safety: ASHRAE 128 requires testing for safety risks due to inadequate thermal performance

  • Environmental sustainability: ASHRAE 128 includes provisions for environmental sustainability, such as reduced carbon emissions

    • Consequences of Not Performing This Test

    Failure to perform ASHRAE 128 testing can result in:

  • Regulatory non-compliance and fines

  • Product recalls or withdrawals from the market

  • Loss of customer confidence and reputation damage

  • Increased costs due to inefficient energy consumption and environmental degradation

    • Industries and Sectors Requiring Testing

    ASHRAE 128 thermal performance verification is required for various industries, including:

  • Commercial buildings: office spaces, shopping centers, hotels, etc.

  • Residential buildings: apartments, houses, condominiums, etc.

  • Industrial processes: manufacturing facilities, power plants, chemical processing plants, etc.

    • Risk Factors and Safety Implications

    ASHRAE 128 testing identifies potential risks and safety implications associated with terminal unit operation. These include:

  • Inadequate thermal performance leading to reduced system efficiency

  • Increased energy consumption resulting in higher costs

  • Potential for equipment damage or failure due to inadequate design

    • Quality Assurance and Quality Control Aspects

    ASHRAE 128 requires a comprehensive quality assurance (QA) and quality control (QC) program to ensure that terminal units meet specific requirements. This includes:

  • Regular testing and inspection of terminal units

  • Implementation of corrective actions for non-compliance

  • Continuous improvement of manufacturing processes

    • ASHRAE 128 thermal performance verification is an essential component of terminal unit development, production, and installation. Failure to comply with this standard can result in inefficient energy consumption, safety risks, and environmental degradation.

    By understanding the requirements and needs outlined in ASHRAE 128, manufacturers, suppliers, and installers can ensure that their products meet specific standards for energy efficiency, safety, and environmental sustainability.

    ASHRAE 128 Thermal Performance Verification of Terminal Units Laboratory Testing Service: A Comprehensive Guide

    We will continue to provide a comprehensive guide to the laboratory testing service for ASHRAE 128 thermal performance verification of terminal units in the next section.

    Please let me know if you would like me to proceed with the next part of the guide.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers