EUROLAB
astm-d5550-analysis-of-plasticizers-in-polymers
Plastic Identification and Composition ASTM D1003 Haze Measurement in PlasticsASTM D1238 Melt Flow Index Testing of PlasticsASTM D1434 Gas Transmission TestingASTM D1505 Density Measurement of PlasticsASTM D1617 Identification of Recycled Plastics by FTIRASTM D1928 Tear Resistance Testing of PlasticsASTM D2244 Color Measurement StandardsASTM D256 Izod Impact TestingASTM D2583 Indentation Hardness of PlasticsASTM D2863 Oxygen Index MeasurementASTM D3843 Microstructure Analysis of PlasticsASTM D4075 Analysis of CopolymersASTM D4674 Analysis of Antioxidants in PlasticsASTM D522-14 Adhesion Testing for Plastic CoatingsASTM D5230 Leachate Testing for Plastic AdditivesASTM D5296 Molecular Weight of Polymers by GPCASTM D543 Chemical Resistance of PlasticsASTM D5480 Identification of Plastics by MicrospectroscopyASTM D6006 Polymer Identification by Pyrolysis GC-MSASTM D638 Tensile Testing of PlasticsASTM D648 Heat Deflection Temperature of PlasticsASTM D6980 Moisture Analysis in PolymersASTM D7217 Identification of Post-Consumer PlasticsASTM D7611 Plastic Material Identification Using CodesASTM D785 Hardness of Plastics by Rockwell MethodASTM D790 Flexural Testing of PlasticsASTM D792 Specific Gravity of Plastics by DisplacementASTM D882 Tensile Testing of Plastic FilmsASTM E1131 Thermal Analysis of Plastics by TGAASTM E2040 X-ray Diffraction for Polymer CrystallinityASTM E2091 Determination of UV Stabilizers in PolymersASTM E793 Thermomechanical Analysis of PlasticsASTM G154 UV Exposure Testing for PlasticsISO 1043-1 Plastic Identification by SymbolISO 1043-2 Plastic Identification Codes for AdditivesISO 1133 Plastics – Determination of Melt Flow RateISO 11357-1 Differential Scanning Calorimetry for PlasticsISO 11357-3 Plastics Thermal Stability TestingISO 11357-6 Plastics – Crystallinity DeterminationISO 11358-1 Thermogravimetric Analysis of PlasticsISO 11664 Color Measurement of PlasticsISO 1183-1 Determination of Density of PlasticsISO 12048 Plastics Identification by Visual InspectionISO 12086 Plastic Waste Sorting and IdentificationISO 13984 Plastics Identification Using Near-Infrared SpectroscopyISO 15106-1 Gas Permeability of PlasticsISO 16014 Plastics – Determination of Moisture ContentISO 1628-1 Determination of Polymer CompositionISO 16770 Plastics Identification by MicroscopyISO 16773-1 Plastics Composition Analysis by Infrared SpectroscopyISO 178 Flexural Properties of PlasticsISO 180 Impact Resistance of PlasticsISO 1817 Plastic Resistance to Liquids TestingISO 18553 Identification of Plastic FilmsISO 1872-2 Plastic Additives IdentificationISO 1999 Identification of Plastic Recycling StreamsISO 20344 Testing of Safety Shoes Plastic ComponentsISO 22068 Analysis of Flame Retardants in PlasticsISO 23936 Plastics – Weathering ResistanceISO 2859 Sampling Procedures for Plastics TestingISO 291-1 Plastics – Hardness TestingISO 294-4 Plastics – Determination of Molecular WeightISO 3451-1 Plastics – Identification by Combustion TestingISO 4589-2 Determination of Oxygen Index of PlasticsISO 527-1 Tensile Properties of PlasticsISO 75-1 Plastics Heat Deflection TestingISO 9001 Quality Management for Plastic Composition Testing

ASTM D5550 Analysis of Plasticizers in Polymers: Eurolabs Laboratory Testing Service

The ASTM D5550 Analysis of Plasticizers in Polymers is a widely recognized standard for evaluating the presence and concentration of plasticizers in polymers. The standard is developed by the American Society for Testing and Materials (ASTM) and is used globally as a benchmark for quality and safety.

Legal and Regulatory Framework

The testing of plasticizers in polymers is governed by various national and international regulations, including:

  • European Unions Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)

  • United States Environmental Protection Agencys (EPA) Toxics Release Inventory (TRI)

  • International Organization for Standardization (ISO) 17025:2017

  • American Society for Testing and Materials (ASTM) D5550-14

    • These regulations aim to ensure the safety of consumers by monitoring the levels of plasticizers in polymers, which can pose health risks if not properly controlled.

    International and National Standards

    The ASTM D5550 Analysis of Plasticizers in Polymers testing is covered under various international and national standards, including:

  • ISO 17025:2017

  • EN 13132:2008 (European standard)

  • TSE 1174:2015 (Turkish standard)

  • GB/T 23451-2019 (Chinese standard)

    • Standard Development Organizations

    The development of standards for plasticizer testing is the responsibility of various organizations, including:

  • American Society for Testing and Materials (ASTM)

  • International Organization for Standardization (ISO)

  • European Committee for Standardization (CEN)

    • These organizations collaborate to ensure that standards are harmonized across regions and industries.

    Standard Evolution and Update

    Standards evolve as new research and technology emerge. The ASTM D5550 standard has undergone revisions, with the latest version being published in 2014. Eurolab stays up-to-date with the latest developments and updates its testing procedures accordingly.

    Specific Standard Numbers and Scope

    The relevant standard numbers for plasticizer testing are:

  • ASTM D5550-14: Standard Test Method for Analysis of Plasticizers in Polymers

  • ISO 17025:2017: General Requirements for the Competence of Testing and Calibration Laboratories

    • These standards cover various aspects of plasticizer testing, including sample preparation, testing parameters, and data analysis.

    Industry-Specific Examples

    Different industries require varying levels of plasticizer testing. For example:

  • Food packaging industry requires low levels of plasticizers to ensure food safety.

  • Automotive industry requires higher levels of plasticizers for durability and performance.

    • Statistical Data and Research Findings

    According to the European Chemicals Agency (ECHA), over 50 of EU manufacturers reported that they have reduced their use of plasticizers due to regulatory pressures. This highlights the importance of accurate testing in ensuring compliance with regulations.

    Standard Compliance Requirements

    Industry-specific standards and regulations dictate the frequency and scope of plasticizer testing. For example:

  • Automotive industry: ASTM D5550-14

  • Food packaging industry: EN 13132:2008

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers