EUROLAB
en-459-1-building-lime-definitions-specifications-and-conformity-criteria
Cement and Lime Analysis AASHTO M240 Standard Specification for Lime for Soil StabilizationAASHTO M85 Portland Cement SpecificationAASHTO T105 Fineness of Cement by Air PermeabilityAASHTO T106 Density of Hydraulic CementAASHTO T114 Setting Time of Hydraulic CementAASHTO T152 Chemical Analysis of Hydraulic CementASTM C1074 Estimating Concrete Strength by Maturity MethodASTM C1107 Specification for Packaged Dry, Hydraulic-Cement GroutASTM C114 Chemical Analysis of Hydraulic CementASTM C114 Standard Chemical Analysis of Cementitious MaterialsASTM C1146 Testing Blended Hydraulic CementsASTM C1157 Performance Specification for Hydraulic CementASTM C1158 Testing Pozzolanic Reactivity of CementASTM C1240 Testing Silica Fume for Use in Cementitious MaterialsASTM C1364 Testing Pozzolanic Cementitious MaterialsASTM C150 Specification for Portland CementASTM C1506 Chemical Composition of Portland Cement by XRFASTM C1510 Evaluation of Cement Clinker for SoundnessASTM C1517 Specification for Hydrated Lime for Masonry PurposesASTM C1602 Sampling and Testing of Hydraulic CementASTM C1608 Chemical Analysis of Gypsum and LimeASTM C1679 Testing Early-Age Shrinkage of Cementitious MixturesASTM C1709 Testing Pozzolanic Materials for Use in CementASTM C185 Air Content of Hydraulic CementASTM C185 Determination of Air Content in Cement PastesASTM C187 Determination of Normal Consistency of CementASTM C187 Normal Consistency of Hydraulic CementASTM C191 Time of Setting of Hydraulic Cement by Vicat NeedleASTM C204 Fineness of Hydraulic Cement by Air PermeabilityASTM C311 Sampling and Testing Fly Ash or Raw or Calcined Natural PozzolansASTM C430 Fineness of Hydraulic Cement by Wet SievingASTM C977 Specification for Quicklime for Treatment of WaterBS EN 196-2 Cement Chemical AnalysisBS EN 196-3 Cement Setting Times and SoundnessBS EN 450-1 Fly Ash for Use in ConcreteBS EN 459 Lime SpecificationsBS EN 459-2 Test Methods for Building LimeEN 196-1 Determination of Strength of CementEN 196-11 Determination of Alkali Content in CementEN 196-2 Methods of Testing Cement - Chemical AnalysisEN 196-3 Determination of Setting Times and SoundnessEN 196-6 Determination of FinenessEN 196-7 Air Content of CementEN 197-1 Composition, Specifications and Conformity Criteria for Common CementsEN 450-1 Fly Ash for Concrete - SpecificationsEN 451-1 Determination of Loss on Ignition in CementEN 459-2 Test Methods for Building LimeEPA SW-846 Method 6010 Metal Analysis in CementEPA SW-846 Test Methods for Cement ContaminantsISO 10426 Testing Hydrated Lime for Use in MortarsISO 10665 Chemical Analysis of Hydraulic CementISO 13194 Determination of Chloride Content in CementISO 13194 Determination of Sulfate Content in CementISO 13195 Determination of Insoluble Residue in CementISO 13195 Determination of Insoluble Residue in CementISO 13195 Insoluble Residue Test in CementISO 13196 Determination of Loss on Ignition in CementISO 13196 Determination of Loss on Ignition in CementISO 14001 Environmental Management in Cement ManufacturingISO 14001 Environmental Management Systems in Lime ProductionISO 1920-3 Sampling Fresh ConcreteISO 29581-1 Cement Composition and Conformity - Part 1ISO 29581-2 Cement Composition and ConformityISO 679 Methods of Testing Cement – Determination of StrengthISO 9001 Quality Management in Cement ProductionISO 9001 Quality Management Systems in Cement ManufacturingJIS R 5201 Testing Methods for CementJIS R 5202 Chemical Analysis of CementJIS R 5205 Physical Testing of CementJIS R 5210 Physical Testing of LimeJIS R 5211 Chemical Analysis of Lime

Comprehensive Guide to EN 459-1 Building Lime - Definitions, Specifications and Conformity Criteria Laboratory Testing Service by Eurolab

EN 459-1 is a European standard that provides definitions, specifications, and conformity criteria for building limes. The standard is published by the European Committee for Standardization (CEN) and is widely recognized as the authoritative reference for building lime testing.

Legal and Regulatory Framework

The EN 459-1 standard is part of the EUs Construction Products Regulation (CPR), which requires that all construction products, including building limes, meet specific requirements to ensure safety and performance. Compliance with this standard is mandatory for all manufacturers, suppliers, and importers of building lime.

International and National Standards

EN 459-1 Building Lime - Definitions, Specifications and Conformity Criteria testing is based on international standards such as ISO 787 (Lime) and ASTM C109 (Compressive Strength of Hydraulic Cement Mortars). The standard is also aligned with national standards in countries such as the UK (BS EN 459-1), Germany (DIN EN 459-1), and France (NF EN 459-1).

Standard Development Organizations

The development and maintenance of EN 459-1 are overseen by CEN, which works closely with other standard development organizations such as ISO (International Organization for Standardization) and ASTM (American Society for Testing and Materials). These organizations ensure that the standard remains up-to-date and relevant to industry needs.

Evolution and Updates

Standards evolve over time in response to technological advancements, new materials, or changing regulatory requirements. EN 459-1 has undergone several revisions since its first publication in 1997, with the most recent version being released in 2016.

Standard Numbers and Scope

EN 459-1 is part of a larger family of standards for building limes, which includes:

  • EN 459-1: Building Lime - Definitions, Specifications and Conformity Criteria

  • EN 459-2: Building Lime - Composition, Properties and Conformity Criteria

    • The standard applies to all types of building lime, including natural hydraulic lime (NHL), artificial hydraulic lime (AHL), and blended lime.

    Standard Compliance Requirements

    Compliance with EN 459-1 is required for all construction projects involving building lime. Manufacturers must demonstrate compliance through testing and certification by a recognized laboratory.

    Industry-Specific Examples and Case Studies

    EN 459-1 is widely used in various industries, including:

  • Construction: building limes are used as binders in mortars, plasters, and renders.

  • Architecture: building limes are used for historic preservation and restoration projects.

  • Engineering: building limes are used in specialized applications such as nuclear power plants.

    • Statistical Data and Research Findings

    According to a study by the European Lime Association (EuLA), compliance with EN 459-1 has improved significantly since its introduction, with over 90 of manufacturers now meeting the standards requirements.

    ---

    Why is this specific test needed and required?

    EN 459-1 Building Lime - Definitions, Specifications and Conformity Criteria testing is essential to ensure the safety and performance of building limes in construction projects. The standard provides a framework for manufacturers to demonstrate compliance with regulatory requirements.

    Business and Technical Reasons for Conducting EN 459-1 Testing

    Conducting EN 459-1 testing is necessary for several reasons:

  • Ensures product safety and performance

  • Demonstrates compliance with regulatory requirements

  • Enhances product quality and reputation

  • Supports business growth and competitiveness

    • Consequences of Not Performing this Test

    Failure to conduct EN 459-1 testing can result in:

  • Product failure and liability claims

  • Regulatory non-compliance and fines

  • Reputation damage and loss of business

  • Economic losses due to product recall or replacement

    • ---

    Detailed Step-by-Step Explanation of How the Test is Conducted

    EN 459-1 testing involves several steps, including:

    1. Sample preparation: collecting and preparing building lime samples for testing.

    2. Testing equipment and instruments: using calibrated equipment to conduct tests such as compressive strength, water absorption, and setting time.

    3. Testing environment requirements: maintaining a controlled environment with specific temperature, humidity, and pressure conditions.

    4. Measurement and analysis methods: measuring and analyzing test results to determine compliance with standard requirements.

    Testing Equipment and Instruments

    EN 459-1 testing uses a range of equipment and instruments, including:

  • Compressive strength testing machine (e.g., EN ISO 679)

  • Water absorption testing apparatus (e.g., EN ISO 787-3)

  • Setting time testing device (e.g., EN ISO 789)

    • Testing Environment Requirements

    EN 459-1 testing requires a controlled environment with specific conditions, including:

  • Temperature: between 20C and 30C

  • Humidity: between 50 and 70

  • Pressure: atmospheric pressure

    • ---

    Why is this specific test needed and required?

    EN 459-1 Building Lime - Definitions, Specifications and Conformity Criteria testing is essential to ensure the safety and performance of building limes in construction projects. The standard provides a framework for manufacturers to demonstrate compliance with regulatory requirements.

    Business and Technical Reasons for Conducting EN 459-1 Testing

    Conducting EN 459-1 testing is necessary for several reasons:

  • Ensures product safety and performance

  • Demonstrates compliance with regulatory requirements

  • Enhances product quality and reputation

  • Supports business growth and competitiveness

    • Consequences of Not Performing this Test

    Failure to conduct EN 459-1 testing can result in:

  • Product failure and liability claims

  • Regulatory non-compliance and fines

  • Reputation damage and loss of business

  • Economic losses due to product recall or replacement

    • ---

    Detailed Step-by-Step Explanation of How the Test is Conducted

    EN 459-1 testing involves several steps, including:

    1. Sample preparation: collecting and preparing building lime samples for testing.

    2. Testing equipment and instruments: using calibrated equipment to conduct tests such as compressive strength, water absorption, and setting time.

    3. Testing environment requirements: maintaining a controlled environment with specific temperature, humidity, and pressure conditions.

    4. Measurement and analysis methods: measuring and analyzing test results to determine compliance with standard requirements.

    Testing Equipment and Instruments

    EN 459-1 testing uses a range of equipment and instruments, including:

  • Compressive strength testing machine (e.g., EN ISO 679)

  • Water absorption testing apparatus (e.g., EN ISO 787-3)

  • Setting time testing device (e.g., EN ISO 789)

    • Testing Environment Requirements

    EN 459-1 testing requires a controlled environment with specific conditions, including:

  • Temperature: between 20C and 30C

  • Humidity: between 50 and 70

  • Pressure: atmospheric pressure

    • ---

    Conclusion

    EN 459-1 Building Lime - Definitions, Specifications and Conformity Criteria testing is an essential tool for manufacturers to demonstrate compliance with regulatory requirements. By following the standards guidelines and conducting regular testing, manufacturers can ensure product safety and performance while maintaining a competitive edge in the market.

    About Eurolab

    Eurolab is a leading provider of laboratory testing services, including EN 459-1 Building Lime - Definitions, Specifications and Conformity Criteria testing. Our team of experts has extensive experience in conducting various types of testing, ensuring that our clients receive accurate and reliable results.

    For more information on EN 459-1 testing or to request a quote for your project, please contact us at infoeurolab.com(mailto:infoeurolab.com) or visit our website at eurolab.com.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers