EUROLAB
iec-60068-2-6-vibration-sinusoidal-testing
Vibration and Shock Testing ASTM D1876 Peel Resistance Testing under VibrationASTM D2444 Abrasion Resistance under Dynamic LoadASTM D256 Impact Resistance of PlasticsASTM D2794 Impact Resistance of CoatingsASTM D3359 Adhesion Testing under Dynamic LoadsASTM D3574 Dynamic Mechanical Analysis of FoamASTM D4052 Mechanical Vibration and Shock AnalysisASTM D4169 Performance Testing of Shipping Containers by VibrationASTM D5116 Shock and Vibration Testing of PackagingASTM D522 Impact Testing of Coatings on SubstratesASTM D7028 Compression and Impact Testing of PolymersASTM D7136 Impact and Shock Resistance of CompositesASTM D7137 Compression and Shock Testing of MaterialsASTM D999 Mechanical Shock Testing of Shipping ContainersASTM E756 Vibration Testing and InstrumentationASTM F1264 Dynamic Load Testing of Medical DevicesASTM F2330 Vibration Testing of Medical DevicesASTM F2503 Vibration Analysis of Medical DevicesASTM F2792 Vibration Endurance of Medical Device ComponentsASTM F2817 Shock Testing of Electronic ComponentsASTM F2978 Dynamic Mechanical Testing of Medical MaterialsASTM F3001 Vibration Testing of ImplantsIEC 60068-2-14 Shock Testing ProceduresIEC 60068-2-27 Shock Resistance TestIEC 60068-2-27 Shock TestingIEC 60068-2-29 Impact Testing ProceduresIEC 60068-2-64 Random Vibration TestingIEC 60068-2-64 Vibration (Broadband Random) TestingIEC 60512 Functional Electrical Testing after VibrationIEC 60529 Protection against Environmental Vibration (IP Codes)IEC 60529 Vibration Protection for EquipmentIEC 60601-1-11 Vibration in Medical Electrical EquipmentIEC 60721 Classification of Environmental ConditionsIEC 60721-3-6 Classification of Environmental ConditionsIEC 61373 Railway Equipment Shock TestingIEC 61373 Shock and Vibration Testing for Railway ApplicationsIEC 61373-1 Shock and Vibration Test Methods for RailwayISO 10816 Mechanical Vibration - Evaluation of Machine VibrationISO 10816-1 Vibration Measurement ProceduresISO 10816-3 Vibration Severity for Rotating MachineryISO 10993-12 Sample Preparation for Mechanical TestingISO 11210 Mechanical Shock Testing of EquipmentISO 13355 Environmental Shock Testing of EquipmentISO 13355 Shock and Vibration Resistance of Medical DevicesISO 13355 Shock Resistance Testing of Electronic EquipmentISO 15614 Mechanical Shock Performance of AssembliesISO 16750-3 Environmental Conditions and Testing for Electrical EquipmentISO 16750-4 Mechanical Vibration and ShockISO 178 Dynamic Mechanical Properties of PlasticsISO 178 Mechanical Properties of Plastics Under ShockISO 21920-1 Mechanical Shock Test MethodsISO 21920-2 Mechanical Shock TestingISO 2631 Human Exposure to Whole Body VibrationISO 2631-1 Mechanical Vibration and Shock Effects on HumansISO 5348 Shock Testing of ElectronicsISO 5349 Measurement and Evaluation of Vibration ExposureMIL-STD-167 Vibration and Shock Testing of EquipmentMIL-STD-167-1 Vibration Testing of EquipmentMIL-STD-810F Transportation Vibration and Shock TestingMIL-STD-810G Environmental Engineering Considerations and Laboratory TestsMIL-STD-810H Environmental Vibration Testing

Comprehensive Guide to IEC 60068-2-6 Vibration (Sinusoidal) Testing Services by Eurolab

Standard-Related Information

IEC 60068-2-6 is a standard that outlines the vibration testing requirements for electronic devices and equipment. This standard is part of the IEC 60068 series, which deals with environmental testing for electrotechnical products. The standard specifies the sinusoidal vibration test method to assess the ability of products to withstand vibrations caused by transportation, installation, or operation.

International and National Standards

The international standard IEC 60068-2-6 is equivalent to the following national standards:

  • EN 60068-2-6: European Union

  • ASTM B964-14: United States

  • TSE ISO 2917: Turkey

  • CSN EN 60068-2-6: Czech Republic

    • Standard Development Organizations

    The standard IEC 60068-2-6 is developed and maintained by the International Electrotechnical Commission (IEC). The IEC is a non-profit organization that brings together experts from over 150 countries to develop and publish international standards for electrical, electronic, and related technologies.

    Evolution of Standards

    Standards evolve and get updated to reflect changes in technology, industry practices, or regulatory requirements. New editions of the standard are published periodically, incorporating new testing methods, techniques, or criteria. For example, the latest edition of IEC 60068-2-6 was published in 2017.

    Scope and Application

    IEC 60068-2-6 applies to electronic devices and equipment that are intended for use in various environments, including:

  • Transportation (land, sea, air)

  • Installation

  • Operation

    • The standard covers a wide range of products, including:

  • Electronic components

  • Printed circuit boards

  • Integrated circuits

  • Computers and peripherals

  • Communication equipment

  • Medical devices

    • Consequences of Non-Compliance

    Failure to comply with the IEC 60068-2-6 standard can result in product failure, damage, or even accidents. Regulatory authorities may impose penalties on manufacturers who fail to meet the standards requirements.

    Business and Technical Reasons for Conducting IEC 60068-2-6 Vibration (Sinusoidal) Testing

    The primary reasons for conducting vibration testing according to IEC 60068-2-6 are:

  • To ensure product reliability and durability

  • To prevent product failure or damage during transportation, installation, or operation

  • To reduce warranty claims and maintenance costs

  • To improve customer satisfaction and confidence in the product

    • Risk Factors and Safety Implications

    Vibration testing is essential to assess the ability of products to withstand various types of vibrations. Failure to perform vibration testing can result in:

  • Product failure or damage during transportation, installation, or operation

  • Reduced product lifespan

  • Increased maintenance costs

  • Potential safety hazards for users

    • Quality Assurance and Quality Control Aspects

    IEC 60068-2-6 requires manufacturers to demonstrate the quality and reliability of their products through vibration testing. The standard outlines specific requirements for:

  • Testing equipment and instruments

  • Testing environment and conditions

  • Sample preparation and testing procedures

  • Data collection, analysis, and reporting

    • Competitive Advantages

    Conducting IEC 60068-2-6 vibration (sinusoidal) testing provides several competitive advantages, including:

  • Improved product reliability and durability

  • Enhanced customer satisfaction and confidence in the product

  • Reduced warranty claims and maintenance costs

  • Compliance with regulatory requirements

  • Increased market share and reputation

    • Cost-Benefit Analysis

    While conducting IEC 60068-2-6 vibration (sinusoidal) testing may involve additional costs, the benefits far outweigh these expenses. The cost-benefit analysis of performing this test is as follows:

    Benefits Costs

    --- ---

    Improved product reliability and durability Initial investment in testing equipment and personnel

    Enhanced customer satisfaction and confidence in the product Increased production time due to testing requirements

    Reduced warranty claims and maintenance costs Training and calibration of testing personnel and equipment

    Compliance with regulatory requirements Potential losses due to product failure or damage

    Test Conditions and Methodology

    The IEC 60068-2-6 standard specifies specific test conditions and methodology for vibration testing. These include:

  • Test frequency: 10 Hz, 30 Hz, 55 Hz, and 77 Hz

  • Acceleration: 1 g to 5 g (depending on the product category)

  • Test duration: 30 minutes to 2 hours (depending on the test frequency)

    • Step-by-Step Explanation of the Testing Process

    The vibration testing process involves the following steps:

    1. Sample Preparation: The product is carefully prepared for testing, including any necessary attachments or fixtures.

    2. Instrumentation and Calibration: The testing equipment is calibrated to ensure accuracy and reliability.

    3. Test Setup: The test fixture is set up according to the standards requirements.

    4. Vibration Testing: The product is subjected to vibration at specified frequencies and accelerations for a predetermined duration.

    5. Data Collection and Analysis: Data is collected using specialized equipment, such as accelerometers or strain gauges.

    Test Environment and Conditions

    The test environment and conditions for IEC 60068-2-6 vibration testing are:

  • Room temperature: 23C 5C

  • Relative humidity: 55 10

  • Air pressure: 1013 mbar (sea level)

  • Test fixture: Specified in the standard

    • Reporting Requirements

    The test report must include:

  • Product identification and description

  • Test conditions and methodology

  • Test results, including acceleration vs. time plots or tables of measured values

  • Conclusions and recommendations for product improvement or modification

    • Conclusion

    IEC 60068-2-6 vibration (sinusoidal) testing is an essential process for ensuring the reliability and durability of electronic devices and equipment. The standard outlines specific requirements for testing conditions, methodology, and reporting. Manufacturers who comply with this standard can benefit from improved customer satisfaction, reduced warranty claims, and increased market share.

    Eurolab Testing Services

    At Eurolab, we offer comprehensive vibration testing services according to the IEC 60068-2-6 standard. Our experienced technicians and state-of-the-art equipment ensure accurate and reliable test results. Contact us today to learn more about our testing services and how they can benefit your business.

    Certifications and Qualifications

    Eurolab is certified by:

  • ISO/IEC 17025:2017 (General requirements for the competence of testing and calibration laboratories)

  • IECQ (International Electrochemical Commission Quality) certification

  • NADCAP (National Aerospace and Defense Contractors Accreditation Program) certification

    • Test Equipment and Instrumentation

    Eurolab is equipped with state-of-the-art test equipment, including:

  • Vibration tables or shakers

  • Accelerometers

  • Strain gauges

  • Data acquisition systems

  • Test software for data analysis and reporting.

    • Our Expertise

    At Eurolab, our experienced technicians have extensive knowledge of the IEC 60068-2-6 standard. We can assist with:

  • Testing methodology and test setup

  • Equipment calibration and maintenance

  • Data collection and analysis

  • Reporting and documentation

    • Why Choose Eurolab?

    Choose Eurolab for your vibration testing needs due to our:

  • Comprehensive expertise in IEC 60068-2-6 testing

  • State-of-the-art equipment and facilities

  • Fast turnaround times without compromising quality

  • Friendly and professional service

    • Contact us today to learn more about how we can help you with your IEC 60068-2-6 vibration (sinusoidal) testing requirements.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers