EUROLAB
iso-10791-determination-of-total-hydrocarbon-emissions-from-stacks
Stack Emission Testing EPA Method 0010 Sampling and Analysis of Stack EmissionsEPA Method 0060 Determination of Hydrogen Halides and Halogens in Stack EmissionsEPA Method 0061 Determination of Fluoride Emissions from StacksEPA Method 1 Sample and Velocity Traverses for Stationary SourcesEPA Method 10 Determination of Carbon Monoxide (CO) EmissionsEPA Method 15 Measurement of Hydrogen Chloride EmissionsEPA Method 17 Determination of Particulate Matter Emissions by Filterable and Condensable FractionsEPA Method 17A Measurement of Particulate Matter EmissionsEPA Method 18 Measurement of Gaseous Organic Compound EmissionsEPA Method 1A Sample and Velocity Traverse ProceduresEPA Method 202 Determination of Polycyclic Aromatic HydrocarbonsEPA Method 23 Determination of Polychlorinated Dioxins and Furans in Stack EmissionsEPA Method 23A Dioxins and Furans TestingEPA Method 23A Sampling and Analysis of Dioxins and FuransEPA Method 23B Sampling and Analysis of Polychlorinated BiphenylsEPA Method 23C Sampling and Analysis of DioxinsEPA Method 24 Measurement of VOCsEPA Method 24 Measurement of Volatile Organic Compound Emissions from Stationary SourcesEPA Method 24A Determination of Volatile Organic CompoundsEPA Method 25 Measurement of Total Gaseous Organic ConcentrationsEPA Method 25A Measurement of Total Gaseous Organic ConcentrationsEPA Method 26 Determination of Total Sulfur in Stack GasesEPA Method 26A Sulfur Dioxide TestingEPA Method 28 Sampling for Mercury EmissionsEPA Method 3 Measurement of Gas Velocity and Volumetric Flow Rate in StacksEPA Method 3 Measurement of Stack Gas VelocityEPA Method 301 Determination of VOCs in Stack GasEPA Method 320 Determination of Total Suspended Particulates in Stack GasEPA Method 320.1 Determination of Total Suspended ParticulatesEPA Method 321 Gravimetric Particulate Matter AnalysisEPA Method 321 Total Particulate Matter by Gravimetric AnalysisEPA Method 4 Determination of Moisture Content in Stack GasEPA Method 5 Determination of Particulate Matter Emissions from StacksEPA Method 5A Particulate Matter TestingEPA Method 5B Particulate Matter SamplingEPA Method 5D Particulate Matter Emissions TestingEPA Method 5F Particulate Matter TestingEPA Method 5G Determination of Particulate Matter EmissionsEPA Method 6 Measurement of Sulfur DioxideEPA Method 6 Measurement of Sulfur Dioxide (SO2) EmissionsEPA Method 6C Sulfur Dioxide Emissions TestingEPA Method 7 Determination of Nitrogen Oxides EmissionsEPA Method 7E Measurement of Nitrogen Oxides (NOx) EmissionsEPA Method 7F Nitrogen Oxides EmissionsEPA Method 8 Measurement of Carbon Monoxide (CO) EmissionsEPA Method 8A Measurement of Carbon Monoxide EmissionsEPA Method 8C CO Emissions TestingEPA Method 9 Visual Determination of Opacity for Stack EmissionsEPA Method 9 Visual Opacity TestEPA Method 9A Visual Determination of OpacityISO 10381 Soil and Emission SamplingISO 10381 Soil Sampling Related to Stack EmissionsISO 10381-6 Sampling for Soil and Stack EmissionsISO 10381-6 Soil and Stack Emission SamplingISO 10396 Sampling and Analysis of Particulate Matter in Stack GasISO 10498 Sampling of Gaseous Emissions from Stationary SourcesISO 10498 Sampling of Gaseous Pollutants in Stack GasISO 10499 Sampling and Analysis of Sulfur Dioxide in Stack GasISO 10499 Sulfur Dioxide SamplingISO 10780 Determination of VOCs in Stack GasISO 10780 Sampling and Analysis of Volatile Organic Compounds in Stack GasISO 10780 VOC Sampling and Analysis from Stack EmissionsISO 10781 Measurement of Total Hydrocarbon EmissionsISO 10791-1 Measurement of VOCs in Stack GasISO 10849 Determination of Polycyclic Aromatic Hydrocarbons in Stack GasISO 11338 Sampling of Gaseous Emissions in Industrial StacksISO 11338 Sampling Techniques for Industrial Stack EmissionsISO 11564 Sampling of Heavy Metals in Stack EmissionsISO 12039 Sampling of Gaseous Emissions from Stationary SourcesISO 12141 Measurement of Nitrogen Compounds in Stack GasISO 12141 Nitrogen Compounds AnalysisISO 12141 Sampling and Analysis of Nitrogen Compounds in Stack GasISO 12141 Stack Gas Sampling for Nitrogen CompoundsISO 12619 Hydrogen Fluoride SamplingISO 12619 Sampling and Analysis of Hydrogen Fluoride in Stack GasISO 13196 Sampling of Gaseous Organic Compounds in Stack GasISO 13526 Determination of Total Gaseous Sulfur CompoundsISO 14181 Quality Assurance of Automated Measuring Systems for EmissionsISO 15259 Guidelines for Measurement of Emissions to AirISO 15705 Measurement of Suspended Particulates in Stack EmissionsISO 16000-10 Indoor Air Carbon MonoxideISO 16000-10 Indoor Air Quality – Carbon Monoxide TestingISO 16000-36 Indoor Air Quality Testing (related to emission monitoring)ISO 16000-36 Indoor Air Related to Emission MonitoringISO 16017 VOC SamplingISO 16017-1 Volatile Organic Compound Sampling in Stack EmissionsISO 16017-2 Sampling of VOCs in Industrial EmissionsISO 16017-3 Sampling of Gaseous PollutantsISO 16017-4 Sampling of Gaseous EmissionsISO 17025 Accredited Stack Gas Sampling ProceduresISO 17141 Ammonia Emission SamplingISO 17141 Sampling and Analysis of Ammonia in Stack GasISO 19710-1 Stack Emission Sampling Using Extractive TechniquesISO 4225 Air Quality – Vocabulary and Definitions for Stack TestingISO 7935 Measurement of Gaseous Pollutants in Stack GasISO 9096 Emission Testing ProceduresISO 9096 Emissions Testing Quality AssuranceISO 9096 Measurement of Fluid Flow in Closed Conduits – Stack TestingISO 9096 Stack Emission Velocity and Flow Rate Measurement

Comprehensive Guide to ISO 10791 Determination of Total Hydrocarbon Emissions from Stacks Laboratory Testing Service

ISO 10791 is an international standard that outlines the requirements for determining total hydrocarbon emissions from stacks in various industries. This standard is part of a larger series of standards, known as ISO/TC 196, which focuses on stationary source emissions. The development and maintenance of this standard are overseen by several organizations, including the International Organization for Standardization (ISO), the American Society for Testing and Materials (ASTM), and the European Committee for Standardization (CEN).

Legal and Regulatory Framework

The ISO 10791 standard is closely tied to various national and international regulations governing emissions from industrial sources. For instance:

  • In the United States, the Clean Air Act (CAA) requires facilities to monitor and report emissions of certain pollutants, including hydrocarbons.

  • In Europe, the Industrial Emissions Directive (IED) sets limits on emissions from large-scale industrial installations, including power plants, refineries, and chemical processing units.

  • The European Unions (EU) Solvency II directive requires financial institutions to assess the environmental risks associated with their investments.

    • International and National Standards

    Some relevant standards governing ISO 10791 Determination of Total Hydrocarbon Emissions from Stacks include:

  • ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories

  • ASTM D6425-14 Standard Test Method for Determining the Volatile Organic Compound (VOC) Emission Rate of Solid Wastes by the Small Chamber Method

  • EN 14181:2004 Stationary source emissions - Determination of the mass concentration of hydrogen chloride, chlorine gas and hydrogen chloride in flue gas

  • TSE EN 14182:2012 Stationary source emissions - Determination of the mass concentration of volatile organic compounds (VOCs) in flue gas

    • Standard Development Organizations and Their Role

    ISO/TC 196 is responsible for developing and maintaining standards related to stationary source emissions. This Technical Committee comprises experts from various countries, industries, and regulatory bodies. The ISO/TC 196 secretariat is currently held by the Swedish National Standards Body (SIS).

    Evolution of Standards

    Standards evolve over time in response to changes in technology, regulations, and industry needs. New standards may replace existing ones or update them to reflect advancements in measurement techniques and methodologies.

    Standard Compliance Requirements for Different Industries

    The ISO 10791 standard is applicable to various industries that involve the combustion of fuels, including:

  • Power plants: Emissions from fossil-fuel-based power generation units.

  • Refineries: Hydrocarbon emissions during petroleum refining processes.

  • Chemical processing units: Volatile organic compound (VOC) emissions from chemical manufacturing facilities.

    • Industry-specific examples and case studies will be presented later in this article.

    Why This Specific Test is Needed and Required

    The ISO 10791 standard was developed to provide a harmonized approach for determining total hydrocarbon emissions from stacks. The primary reasons for conducting this test include:

  • Regulatory compliance: Facilities must comply with national and international regulations governing emissions.

  • Environmental protection: Accurate emission monitoring helps prevent environmental damage and ensures the safety of nearby communities.

  • Product quality assurance: Monitoring emissions is essential to maintaining product quality and ensuring that facilities meet industry standards.

    • Business and Technical Reasons for Conducting ISO 10791 Determination of Total Hydrocarbon Emissions from Stacks Testing

    Facilities must conduct regular emission monitoring to ensure compliance with regulations, maintain public trust, and prevent financial penalties. Additionally:

  • Cost savings: Identifying areas for improvement can lead to cost reductions through optimized process control.

  • Improved product quality: Monitoring emissions helps facilities produce high-quality products while minimizing waste.

    • Consequences of Not Performing This Test

    Failing to conduct regular emission monitoring can result in:

  • Regulatory non-compliance: Facilities may face penalties, fines, or even plant closures due to non-compliance with regulations.

  • Environmental damage: Inadequate emission control can lead to environmental harm and potential health risks for nearby communities.

    • Industries and Sectors that Require This Testing

    The following industries require ISO 10791 Determination of Total Hydrocarbon Emissions from Stacks testing:

  • Power plants

  • Refineries

  • Chemical processing units

    • Risk Factors and Safety Implications

    Poor emission control can lead to risks such as:

  • Air pollution: Release of pollutants into the atmosphere, contributing to smog formation.

  • Water pollution: Contamination of nearby water sources through air emissions or effluent releases.

    • Quality Assurance and Quality Control Aspects

    Facilities must implement quality assurance (QA) and quality control (QC) measures to ensure accurate emission monitoring results. This includes:

  • Calibration and maintenance of measurement equipment.

  • Regular training for personnel involved in emission monitoring.

  • Data validation and verification

    • Persuasive Case Studies

    Here are a few examples of facilities that have implemented ISO 10791 Determination of Total Hydrocarbon Emissions from Stacks testing to improve their environmental performance:

  • A European power plant reduced its VOC emissions by 30 after implementing an ISO 10791-based emission monitoring program.

  • A North American refinery saw a decrease in hydrogen chloride (HCl) emissions by 25 following the implementation of ISO 10791.

    • These examples demonstrate the effectiveness of regular emission monitoring and control measures in improving environmental performance.

    Persuasive Conclusion

    In conclusion, conducting regular ISO 10791 Determination of Total Hydrocarbon Emissions from Stacks testing is essential for facilities to ensure regulatory compliance, protect the environment, and maintain public trust. Regular monitoring helps prevent environmental damage, ensures product quality, and provides cost savings through optimized process control.

    Please continue reading for a comprehensive review of relevant standards and guidelines related to stationary source emissions.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers