EUROLAB
iso-13934-2-tensile-strength-by-grab-method
Mechanical Properties ASTM D1424 Tearing Strength of FabricsASTM D1518 Thermal Insulation of TextilesASTM D1683 Seam Strength TestASTM D1776 Conditioning and TestingASTM D1776 Textile ConditioningASTM D2097 Flex Resistance TestASTM D2209 Tensile Strength of LeatherASTM D2900 Sampling of TextilesASTM D3107 Dimensional Stability TestASTM D3511 Pilling Resistance TestASTM D3786 Ball Burst Strength TestASTM D3786 Burst Strength TestASTM D3787 Diaphragm Bursting StrengthASTM D3887 Dimensional Change after LaunderingASTM D3887 Shrinkage TestASTM D4151 Dimensional Stability after LaunderingASTM D4157 Pilling Resistance TestASTM D4705 Tear Resistance of LeatherASTM D4966 Abrasion Resistance TestASTM D4967 Textile TerminologyASTM D4967 Textile TerminologyASTM D5034 Breaking Strength and Elongation of FabricsASTM D5034 Grab Test for Breaking StrengthASTM D5035 Strip Tensile StrengthASTM D5070 Colorfastness to RubbingASTM D5436 Dimensional Change After LaunderingASTM D629 Fiber Content AnalysisASTM D6297 Color Fastness of LeatherASTM D6297 Color Fastness to LightASTM D629M Fiber Blend QuantificationASTM D629M Quantitative Fiber AnalysisASTM F1670 Resistance to Synthetic BloodISO 105-C03 Color Fastness to WashingISO 105-C06 Color Fastness to WashingISO 105-D01 Staining Tests for TextilesISO 105-E01 Effect of Washing on ColorISO 105-X12 Colorfastness to RubbingISO 11092 Thermal Resistance of TextilesISO 11640 Color Change of LeatherISO 12945 Fabric Shrinkage TestingISO 12945-2 Pilling Resistance of FabricsISO 12947 Abrasion Resistance by Martindale MethodISO 13934-1 Tensile Strength of Textile FabricsISO 13935-2 Seam Strength of FabricsISO 13936-1 Dimensional Change of FabricsISO 13936-2 Dimensional Change of Tubular TextilesISO 13936-3 Relaxation Shrinkage of TextilesISO 13937-1 Tear Strength by Pendulum MethodISO 13938-1 Hydraulic Bursting StrengthISO 13938-2 Bursting Strength - Pneumatic MethodISO 13943 Textile TerminologyISO 13943 Textile VocabularyISO 13964 Microspectrophotometric Fiber AnalysisISO 14126 Blood Penetration ResistanceISO 1833 Quantitative Chemical Analysis of FibersISO 1833-1 Fiber Blend AnalysisISO 1974 Sampling Procedures for Textile TestingISO 3376 Tear Strength of LeatherISO 3759 Sample Preparation for TestingISO 3759 Textile Test Sample PreparationISO 4674-1 Tensile Strength of LeatherISO 5404 Flex Resistance of LeatherISO 6330 Domestic Washing and Drying

Comprehensive Guide to ISO 13934-2 Tensile Strength by Grab Method Laboratory Testing Service Provided by Eurolab

ISO 13934-2 is an international standard that specifies the tensile strength of fabrics and textiles using the grab method. This standard is widely used in various industries, including textiles, apparel, and manufacturing. The standard provides a set of requirements for testing equipment, sampling procedures, and data analysis to ensure consistent and reliable results.

Relevant Standards

  • ISO 13934-2:2015

  • ASTM D5034-14 (American Society for Testing and Materials)

  • EN ISO 13934-2:2015 (European Standard)

  • TSE 1618 (Turkish Standard)

    • Legal and Regulatory Framework

    The use of ISO 13934-2 is mandatory in many countries, particularly in the European Union, where it is a harmonized standard. Compliance with this standard is required by various regulations, including:

  • REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals)

  • EU Product Safety Directive

  • Turkish Standardization Institute (TSE)

    • Standard Development Organizations

    The development and maintenance of ISO 13934-2 are the responsibility of the International Organization for Standardization (ISO). The standard is reviewed and updated periodically to reflect advances in technology and changing industry needs.

    International and National Standards

    The adoption of international standards, such as ISO 13934-2, facilitates global trade and ensures that products meet similar safety and performance requirements worldwide. National standards, such as the Turkish Standard TSE 1618, may also be used in conjunction with or as an alternative to ISO 13934-2.

    Standard Compliance Requirements

    Compliance with ISO 13934-2 is essential for manufacturers and suppliers of fabrics and textiles. Failure to comply can result in:

  • Withdrawal of products from the market

  • Fines and penalties

  • Damage to reputation and brand image

  • The standard covers both laboratory testing and on-site testing methods.

  • It specifies requirements for test equipment, including grips, clamps, and force gauges.

  • Sampling procedures are outlined, including the selection of test samples and preparation of fabric specimens.

  • Data analysis is covered, including calculations for tensile strength and stress-strain curves.

    • The ISO 13934-2 standard is essential for ensuring product safety, reliability, and quality in various industries. The following are some of the key reasons why this test is needed and required:

  • Product Safety: Ensures that fabrics and textiles meet minimum tensile strength requirements to prevent failure under normal use conditions.

  • Quality Control: Provides a standardized method for evaluating fabric performance and detecting defects or anomalies.

  • Regulatory Compliance: Demonstrates compliance with relevant regulations, such as those related to product safety and consumer protection.

    • Business and Technical Reasons

    Conducting ISO 13934-2 testing provides numerous benefits, including:

  • Improved product quality and reliability

  • Enhanced customer confidence and trust

  • Increased market access and trade facilitation

  • Reduced risk of product failure or liability

    • The following is a detailed explanation of the test conditions and methodology for ISO 13934-2:

    1. Equipment: The testing equipment used must meet the requirements specified in the standard, including force gauges, grips, clamps, and extensometers.

    2. Sampling Procedures: Test samples are selected according to the standards sampling plan, which includes considerations for fabric type, weight, and thickness.

    3. Test Specimens: Fabric specimens are prepared according to the standards specifications, including dimensions, shape, and testing orientation.

    4. Testing Parameters: The testing parameters specified in the standard include tensile strength, strain, and stress-strain curves.

    Measurement and Analysis Methods

  • Tensile strength is measured using a force gauge or extensometer.

  • Strain is calculated from the elongation of the fabric specimen.

  • Stress-strain curves are constructed using data from multiple test specimens.

    • Quality Control Measures

  • Equipment calibration and validation procedures must be followed according to the standard.

  • Test results are evaluated for accuracy, precision, and reliability.

    • The following is an overview of the test reporting and documentation requirements for ISO 13934-2:

    1. Test Report: The test report includes all relevant information, including:

    Test details

    Sampling procedures

    Testing parameters

    Results

    Analysis and evaluation

    2. Certification and Accreditation: Eurolabs certification and accreditation status must be demonstrated.

    3. Traceability and Documentation Requirements:

    All test results are traceable to the original test samples.

    Documents, including test reports and certificates, must be retained for a minimum period of 10 years.

  • The standard specifies requirements for data analysis and evaluation, including calculations for tensile strength and stress-strain curves.

  • Results are presented in a clear and concise manner, with all necessary information and explanations provided.

  • Certificates and certificates of conformity are issued according to the standards requirements.

    • Persuasive Conclusion

    In conclusion, ISO 13934-2 is an essential standard for ensuring product safety, quality, and regulatory compliance. Eurolab provides comprehensive laboratory testing services that meet or exceed all relevant standards and regulations. By working with Eurolab, manufacturers and suppliers can:

  • Improve product quality and reliability

  • Enhance customer confidence and trust

  • Increase market access and trade facilitation

  • Reduce risk of product failure or liability

    • Appendices

    The following appendices provide additional information on the ISO 13934-2 standard and testing services provided by Eurolab:

    A. Standard Overview

    B. Test Methods and Procedures

    C. Data Analysis and Evaluation

    D. Sampling Procedures

    E. Equipment Calibration and Validation

    F. Quality Control Measures

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers