EUROLAB
ashrae-guideline-13-control-network-architecture-energy-impact-assessment
Energy Consumption and Controls ASHRAE 100 Energy Performance Baseline Testing in HVAC SystemsASHRAE 105 Building Energy Information System EvaluationASHRAE 135 BACnet Protocol Testing for Energy ManagementASHRAE 135.1 BACnet Device Energy Consumption ProfilingASHRAE 140 Comparative HVAC Energy Simulation ValidationASHRAE 170 Healthcare HVAC Control Energy Performance AssessmentASHRAE 189.1 Sustainability-Oriented HVAC Controls Energy TestingASHRAE 193 Sealing Effectiveness of Control Dampers Energy EvaluationASHRAE 202 Building Commissioning Process for Energy SystemsASHRAE 202-2018 Retro-Commissioning HVAC Control System TestingASHRAE 209 Simulation-Aided HVAC Energy Control Design TestingASHRAE 211 HVAC System Energy Audit Process VerificationASHRAE 231P HVAC Control Optimization for Peak Load Reduction TestingASHRAE 55 Adaptive Control Systems Energy Performance TestingASHRAE 62.1 Control Systems Impact on Ventilation EfficiencyASHRAE 90.1 HVAC Energy Efficiency Compliance TestingASHRAE 90.4 Data Center HVAC Energy Efficiency TestingASHRAE Guideline 14 HVAC Controls Measurement and Verification TestingASHRAE Guideline 36 High-Performance HVAC Control Sequences TestingASHRAE SPC 224 HVAC Operational Performance Data TestingEN 13779 HVAC Demand-Controlled Ventilation Energy Optimization TestingEN 13790 Building Energy Demand Control Strategy TestingEN 15217 HVAC Energy Labeling VerificationEN 15232 Building Automation Control System Energy Impact AssessmentEN 15232-1 BACS Energy Efficiency Functional TestingEN 15232-2 Energy Classification Testing for HVAC Automation SystemsEN 15232-3 Advanced BACS System Impact on Energy Use TestingEN 15239 HVAC System Operating Time Control VerificationEN 15240 HVAC Control Equipment Seasonal Energy Efficiency TestingEN 15241 Ventilation System Energy Control Adjustment TestingEN 15603 HVAC and Building Energy Performance Consolidation TestingEN 16798-17 Control Setpoints Impact on Energy Consumption TestingEN 16798-5-1 Demand-Based HVAC Energy Control System TestingEN 50491 HVAC Control Logic Evaluation under Load VariationsEN 50491-12-2 HVAC Load Shedding Control TestingEN 50598-1 HVAC Motor System Energy Performance EvaluationEN 50598-2 Energy Efficiency of HVAC Speed-Controlled DrivesEN 50600-2-3 Energy Control Testing in Data Center HVAC SystemsEN 50600-3-1 Integrated Controls in Mission Critical HVAC SystemsIEC 60364 Smart HVAC Controls Power Consumption AnalysisIEC 60364-8-1 Active Energy Efficiency Controls TestingIEC 62053 Energy Metering in HVAC Systems VerificationISO 11855 Radiant Heating and Cooling Control Energy TestingISO 12655 HVAC Control Energy Flow Modeling ValidationISO 16484-1 HVAC Control System Design Energy Performance TestingISO 16484-2 Control Equipment Energy Behavior AnalysisISO 16484-3 System Integration Testing for Building Control NetworksISO 16484-4 Control Functions in HVAC Systems Load Management TestingISO 16484-5 BMS Communication Protocol VerificationISO 16484-6 Control Applications Logic Energy Consumption ValidationISO 50001 HVAC Integration for Energy Management SystemsISO 50002 HVAC Energy Auditing and System Performance TestingISO 50003 HVAC Control Impact on Certified Energy Performance TestingISO 50006 Energy Performance Indicator (EnPI) Testing for HVAC ControlsISO 50008 Energy Performance Measurement in Automated HVAC SystemsISO 50015 Measurement and Verification of HVAC Energy SavingsISO 50016 Internal HVAC Energy Use Monitoring and Controls VerificationISO 50047 Energy Use Monitoring in Controlled HVAC EnvironmentsISO 52120-1 HVAC Control Functionality VerificationISO 52120-2 Lighting and HVAC Interaction Energy TestingISO 52127-1 Energy Efficiency Benchmarking in HVAC Control SystemsISO/TR 50004 Continuous Improvement in HVAC Energy PerformanceISO/TR 52127-2 Building Energy Budgeting with HVAC Controls

Comprehensive Guide to Eurolabs ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment Laboratory Testing Service

Introduction

In todays fast-paced industrial landscape, ensuring the efficiency and reliability of control network architectures is crucial for minimizing energy consumption, reducing costs, and enhancing overall system performance. To address this critical need, Eurolab offers a comprehensive laboratory testing service based on ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment. This article provides an in-depth exploration of the testing service, covering standard-related information, test requirements and needs, test conditions and methodology, test reporting and documentation, and why this test should be performed.

ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment is a widely accepted industry standard that provides guidelines for assessing the energy impact of control network architectures. The guideline is developed by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) and is applicable to various industries, including commercial, industrial, and residential sectors.

The relevant standards governing ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment testing include:

  • ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories

  • ASTM E2500-18 Standard Guide for the Performance of Building Thermal Energy Systems

  • EN 15251-2007 Indoor environmental input parameters for design and assessment of energy performance of buildings including the impact of summer conditions on building heating and cooling requirements

  • TSE 635:2013 Building Services - Thermal Comfort

    • These standards provide a framework for conducting laboratory testing to assess the energy impact of control network architectures. The legal and regulatory framework surrounding this testing service is primarily governed by national laws and regulations, which vary depending on the country.

    Standard Development Organizations (SDOs) and Their Role

    ASHRAE, ISO, ASTM, EN, and TSE are prominent SDOs responsible for developing and maintaining industry standards. These organizations play a crucial role in ensuring that standards remain relevant and effective through continuous review and revision.

    The standard development process typically involves:

    1. Committee formation: A group of experts from various industries and sectors comes together to form a committee.

    2. Standardization document development: The committee develops the standardization document, which outlines the requirements for testing and assessment.

    3. Public comment period: Interested parties can provide comments on the draft standard during the public comment period.

    4. Finalization and publication: After considering all comments, the final standard is published.

    ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment testing is necessary for various reasons:

  • Business and Technical Reasons: Conducting this test helps organizations identify potential energy-saving opportunities, optimize control network architectures, and reduce energy consumption.

  • Consequences of Not Performing the Test: Without proper assessment, organizations may face increased energy costs, reduced system efficiency, and compromised product safety.

  • Industries and Sectors: ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment testing is applicable to commercial, industrial, and residential sectors.

  • Risk Factors and Safety Implications: Poorly designed or inefficient control network architectures can lead to safety hazards, equipment failures, and environmental concerns.

    • The ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment testing service is conducted in accordance with established standards and guidelines. The test methodology involves the following steps:

    1. Sample Preparation: Samples of control network architectures are prepared for testing.

    2. Testing Equipment and Instruments: Specialized equipment, such as data loggers and sensors, are used to measure energy consumption and other parameters.

    3. Testing Environment Requirements: The testing environment must meet specific temperature, humidity, and pressure conditions to ensure accurate results.

    4. Sample Preparation Procedures: Samples are prepared according to established protocols.

    5. Testing Parameters and Conditions: The test is conducted under controlled conditions to simulate real-world scenarios.

    The test report provides detailed information on the testing methodology, equipment used, and results obtained. The report format typically includes:

  • Introduction: Overview of the testing service and purpose.

  • Testing Methodology: Description of the testing procedures and parameters.

  • Results: Presentation of the energy consumption data and other relevant findings.

  • Conclusion: Summary of the test results and recommendations.

    • Conducting ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment testing offers numerous benefits:

  • Risk Assessment and Mitigation: Identifies potential energy-saving opportunities and optimizes control network architectures.

  • Quality Assurance and Compliance: Ensures compliance with industry standards and regulations.

  • Competitive Advantages: Enhances system efficiency, reduces energy consumption, and improves overall performance.

  • Cost Savings: Minimizes energy costs and reduces equipment failures.

    • Conclusion

    Eurolabs ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment laboratory testing service provides a comprehensive solution for assessing the energy impact of control network architectures. By understanding the standard-related information, test requirements and needs, test conditions and methodology, and why this test should be performed, organizations can make informed decisions to optimize their control network architectures and reduce energy consumption.

    Contact Us

    For more information on Eurolabs ASHRAE Guideline 13 Control Network Architecture Energy Impact Assessment laboratory testing service, please visit our website or contact us directly. Our team of experts is available to assist you in optimizing your control network architectures and reducing energy consumption.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers