EUROLAB
astm-d6413-vertical-flammability-test-of-textiles
Flammability Testing ASTM D1230 Flammability of Textile Fabrics by Use of a Radiant Heat Energy SourceASTM D1230 Radiant Heat Test for Textile FlammabilityASTM D1230-17 Standard Test Method for Flammability of Fabrics by Radiant HeatASTM D3675 Flammability of Textile Fabrics Using a Vertical Strip MethodASTM D3801 Rate of Burning of PlasticsASTM D3801 Standard Test Method for Measuring Rate of Burning of PlasticsASTM D5208 Open Flame Flammability TestASTM D5208 Standard Test Method for Flammability of Textiles by Open FlameASTM D5802 Smoldering Ignition Resistance of TextilesASTM D6413 Evaluation of Flame Resistance After LaunderingASTM D6413 Flame Resistance of Fabrics After Multiple LaunderingASTM D6413 Standard Test Method for Flame Resistance of Textiles (Vertical Test)ASTM D6413 Vertical Flame Resistance TestASTM D6413 Vertical Flame Test for FabricsASTM D6413-21 Vertical Flame TestASTM D6413-21 Vertical Flame Test of TextilesASTM E1353 Flammability of MattressesASTM E1353 Standard Test Method for Flammability of MattressesASTM E1354 Cone Calorimeter Test for Heat Release RateASTM E1354 Cone Calorimeter Test MethodASTM E162 Surface Flammability by Radiant HeatASTM E162 Surface Flammability of Materials Using a Radiant Heat Energy SourceASTM E2058 NFPA 286 Room Corner TestASTM E2058 NFPA 286 Room Corner Test for Wall and Ceiling FinishASTM E648 Critical Radiant Flux of Floor Covering SystemsASTM E84 Steiner Tunnel TestASTM E84 Surface Burning Characteristics of Building Materials (Steiner Tunnel Test)ASTM E84-20 Standard Test Method for Surface Burning CharacteristicsASTM F1506 Performance of Materials Used in Protective ClothingASTM F1506 Protective Clothing for Electric Arc ProtectionASTM F1930 Children's Sleepwear Flammability TestASTM F1930 Flammability Test of Children's Sleepwear FabricsASTM F2712 Fire Fighter Protective Ensemble TestASTM F2712 Flammability of Protective Ensembles for Fire FightersISO 11925-1 Ignitability of Building Products with Direct Flame ContactISO 11925-2 Ignitability by Flame of Building ProductsISO 11925-2 Reaction to Fire Tests – Ignitability by FlameISO 11992 Vehicle Fire Test MethodsISO 11992 Vehicle Fire Testing StandardsISO 12127-1 Textile Fabrics – Determination of Burning BehaviorISO 13506 Determination of Smouldering Ignition ResistanceISO 13506 Smouldering Ignition Resistance of TextilesISO 13772 Burning Behavior of Protective ClothingISO 13772 Protective Clothing – Burning Behavior in Clothing AssembliesISO 15025 Limited Flame Spread Test for Protective ClothingISO 15025 Protective Clothing – Method for Limited Flame SpreadISO 15025 Surface Flammability of Textiles – Small Flame TestISO 15025 Surface Flammability of Textiles – Small Flame Test MethodISO 15025-1 Limited Flame Spread TestISO 15025-1 Protective Clothing – Limited Flame Spread – Small FlameISO 15025-1 Small Flame Test for Protective ClothingISO 15026 Protective Clothing – Evaluation of Flame ResistanceISO 15027 Protective Clothing – Limited Flame SpreadISO 15384 Flame Resistant Materials for Protective ClothingISO 15384 Protective Clothing – Flame Resistant MaterialsISO 5657 Reaction-to-fire Tests – Spread of FlameISO 5660 Cone Calorimeter Test for Heat ReleaseISO 5660 Heat Release Rate Measurement Using Cone CalorimeterISO 5660-1 Heat Release Rate MeasurementISO 5660-1 Heat Release Rate – Part 1: Cone Calorimeter MethodISO 6940 Determination of Ignition Temperature by Heating a Hot PlateISO 6940 Determination of Ignition Temperature of TextilesISO 6940 Ignition Temperature of TextilesISO 6941 Determination of Flame Spread on Horizontal SurfacesISO 6941 Textile Flame Spread TestingISO 6941 Textiles – Burning Behavior by Measuring Flame SpreadISO 6942 Protective Clothing Heat and Flame EvaluationISO 6942 Protective Clothing – Evaluation of Heat Transfer and ProtectionISO 6942 Protective Clothing – Heat and Flame ResistanceISO 9151 Protective Clothing – Test Method for Heat and Flame ResistanceISO 9151 Test Method for Heat and Flame Resistance of Protective Clothing

ASTM D6413 Vertical Flammability Test of Textiles Laboratory Testing Service Provided by Eurolab

The ASTM D6413 Vertical Flammability Test of Textiles is a widely recognized standard for evaluating the flammability characteristics of textiles. This test method is used to determine the ignition and flame spread of fabrics in a vertical orientation, simulating real-world fire scenarios.

Relevant Standards

  • ISO 4589-2:2010 - Plastics Determination of burning behavior of plastics and other materials using a flame source

  • EN ISO 4589-2:2007 - Plastics Determination of burning behaviour of plastics and other materials using a flame source

  • TSE EN ISO 4589-2:2007 - Plastics Determination of burning behaviour of plastics and other materials using a flame source

  • ASTM D6413-10 - Standard Test Method for Flammability of Textiles

    • Legal and Regulatory Framework

    The ASTM D6413 Vertical Flammability Test of Textiles is governed by various national and international standards, including the United States Code of Federal Regulations (CFR), the European Unions Directive on the safety of construction products (CPR), and the International Organization for Standardization (ISO) 4589-2.

    Standard Development Organizations

    The American Society for Testing and Materials (ASTM) is responsible for developing and maintaining standards related to textiles, including ASTM D6413. Other standard development organizations involved in this field include ISO and EN.

    Evolution of Standards

    Standards evolve over time as new technologies and research findings become available. Updates to existing standards are made to ensure they remain relevant and effective in addressing emerging issues.

    Standard Numbers and Scope

    ASTM D6413-10: Standard Test Method for Flammability of Textiles

  • Scope: This test method evaluates the flammability characteristics of textiles, including ignition and flame spread.

  • Application: Used in a variety of industries, including apparel, upholstery, and interior decorating.

    • Standard Compliance Requirements

    Compliance with ASTM D6413 is mandatory for certain industries, such as:

  • Apparel industry (Cotton, polyester, nylon)

  • Upholstery and furniture manufacturing

  • Interior decorating and design

    • Non-compliance can result in significant consequences, including recalls, fines, and damage to reputation.

    Why This Test Is Needed

    The ASTM D6413 Vertical Flammability Test of Textiles is necessary due to the increasing demand for safer textiles. Consumers expect products to meet rigorous safety standards, and manufacturers must comply with regulatory requirements.

    Business and Technical Reasons

    Conducting this test provides numerous benefits, including:

  • Enhanced product safety

  • Reduced risk of fires and injuries

  • Improved compliance with regulations

  • Increased customer confidence

    • Industries Requiring This Testing

    The following industries require the ASTM D6413 Vertical Flammability Test of Textiles:

  • Apparel industry (Cotton, polyester, nylon)

  • Upholstery and furniture manufacturing

  • Interior decorating and design

    • Risk Factors and Safety Implications

    Non-compliance with this standard can result in serious consequences, including fires, injuries, and fatalities.

    Quality Assurance and Quality Control Aspects

    Conducting the ASTM D6413 Vertical Flammability Test of Textiles demonstrates a commitment to quality assurance and quality control. Manufacturers must ensure that their products meet rigorous safety standards to maintain customer trust.

    Competitive Advantages and Cost-Benefit Analysis

    Performing this test provides numerous benefits, including:

  • Enhanced product safety

  • Improved compliance with regulations

  • Increased customer confidence

  • Reduced risk of fires and injuries

    • The cost-benefit analysis favors performing the ASTM D6413 Vertical Flammability Test of Textiles due to the significant benefits and reduced risks.

    Step-by-Step Explanation

    1. Preparation of test specimens: The test fabric is cut into specific sizes and shapes.

    2. Instrumentation: A specially designed apparatus, including a gas flame source and ignition system, is used to simulate real-world fire scenarios.

    3. Testing procedure: The test specimen is placed in the testing chamber, and the ignition source is activated.

    4. Measurement and analysis: The flammability characteristics of the textile are measured using specialized instruments.

    Testing Equipment and Instruments Used

  • Gas flame source

  • Ignition system

  • Flammability measurement instrument

    • Testing Environment Requirements

  • Temperature range: 23C 2C (73F 4F)

  • Humidity level: 50 10

  • Pressure: Standard atmospheric pressure

    • Sample Preparation Procedures

    The test fabric is cut into specific sizes and shapes to ensure accurate measurements.

    Testing Parameters and Conditions

  • Ignition temperature

  • Flame spread rate

  • Burning rate

    • Measurement and Analysis Methods

  • Optical pyrometry

  • Infrared radiation measurement

    • Test Results

    The test results provide information on the flammability characteristics of the textile, including ignition temperature, flame spread rate, and burning rate.

    Why This Test Is Important

    Conducting the ASTM D6413 Vertical Flammability Test of Textiles is essential for ensuring product safety, compliance with regulations, and customer confidence.

    Industries Requiring This Testing

    The following industries require the ASTM D6413 Vertical Flammability Test of Textiles:

  • Apparel industry (Cotton, polyester, nylon)

  • Upholstery and furniture manufacturing

  • Interior decorating and design

    • Risk Factors and Safety Implications

    Non-compliance with this standard can result in serious consequences, including fires, injuries, and fatalities.

    Quality Assurance and Quality Control Aspects

    Conducting the ASTM D6413 Vertical Flammability Test of Textiles demonstrates a commitment to quality assurance and quality control. Manufacturers must ensure that their products meet rigorous safety standards to maintain customer trust.

    Competitive Advantages and Cost-Benefit Analysis

    Performing this test provides numerous benefits, including:

  • Enhanced product safety

  • Improved compliance with regulations

  • Increased customer confidence

  • Reduced risk of fires and injuries

    • The cost-benefit analysis favors performing the ASTM D6413 Vertical Flammability Test of Textiles due to the significant benefits and reduced risks.

    Conclusion

    In conclusion, the ASTM D6413 Vertical Flammability Test of Textiles is an essential standard for ensuring product safety, compliance with regulations, and customer confidence. Manufacturers must conduct this test to demonstrate their commitment to quality assurance and quality control.

    Recommendations

  • Conduct the ASTM D6413 Vertical Flammability Test of Textiles on all products requiring flammability evaluation.

  • Ensure that testing is performed in accordance with standard guidelines and procedures.

  • Maintain records of test results for future reference.

    • Future Directions

    Future research should focus on developing more accurate and efficient testing methods, as well as exploring new applications for the ASTM D6413 Vertical Flammability Test of Textiles.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers