EUROLAB
astm-e2058-nfpa-286-room-corner-test-for-wall-and-ceiling-finish
Flammability Testing ASTM D1230 Flammability of Textile Fabrics by Use of a Radiant Heat Energy SourceASTM D1230 Radiant Heat Test for Textile FlammabilityASTM D1230-17 Standard Test Method for Flammability of Fabrics by Radiant HeatASTM D3675 Flammability of Textile Fabrics Using a Vertical Strip MethodASTM D3801 Rate of Burning of PlasticsASTM D3801 Standard Test Method for Measuring Rate of Burning of PlasticsASTM D5208 Open Flame Flammability TestASTM D5208 Standard Test Method for Flammability of Textiles by Open FlameASTM D5802 Smoldering Ignition Resistance of TextilesASTM D6413 Evaluation of Flame Resistance After LaunderingASTM D6413 Flame Resistance of Fabrics After Multiple LaunderingASTM D6413 Standard Test Method for Flame Resistance of Textiles (Vertical Test)ASTM D6413 Vertical Flame Resistance TestASTM D6413 Vertical Flame Test for FabricsASTM D6413 Vertical Flammability Test of TextilesASTM D6413-21 Vertical Flame TestASTM D6413-21 Vertical Flame Test of TextilesASTM E1353 Flammability of MattressesASTM E1353 Standard Test Method for Flammability of MattressesASTM E1354 Cone Calorimeter Test for Heat Release RateASTM E1354 Cone Calorimeter Test MethodASTM E162 Surface Flammability by Radiant HeatASTM E162 Surface Flammability of Materials Using a Radiant Heat Energy SourceASTM E2058 NFPA 286 Room Corner TestASTM E648 Critical Radiant Flux of Floor Covering SystemsASTM E84 Steiner Tunnel TestASTM E84 Surface Burning Characteristics of Building Materials (Steiner Tunnel Test)ASTM E84-20 Standard Test Method for Surface Burning CharacteristicsASTM F1506 Performance of Materials Used in Protective ClothingASTM F1506 Protective Clothing for Electric Arc ProtectionASTM F1930 Children's Sleepwear Flammability TestASTM F1930 Flammability Test of Children's Sleepwear FabricsASTM F2712 Fire Fighter Protective Ensemble TestASTM F2712 Flammability of Protective Ensembles for Fire FightersISO 11925-1 Ignitability of Building Products with Direct Flame ContactISO 11925-2 Ignitability by Flame of Building ProductsISO 11925-2 Reaction to Fire Tests – Ignitability by FlameISO 11992 Vehicle Fire Test MethodsISO 11992 Vehicle Fire Testing StandardsISO 12127-1 Textile Fabrics – Determination of Burning BehaviorISO 13506 Determination of Smouldering Ignition ResistanceISO 13506 Smouldering Ignition Resistance of TextilesISO 13772 Burning Behavior of Protective ClothingISO 13772 Protective Clothing – Burning Behavior in Clothing AssembliesISO 15025 Limited Flame Spread Test for Protective ClothingISO 15025 Protective Clothing – Method for Limited Flame SpreadISO 15025 Surface Flammability of Textiles – Small Flame TestISO 15025 Surface Flammability of Textiles – Small Flame Test MethodISO 15025-1 Limited Flame Spread TestISO 15025-1 Protective Clothing – Limited Flame Spread – Small FlameISO 15025-1 Small Flame Test for Protective ClothingISO 15026 Protective Clothing – Evaluation of Flame ResistanceISO 15027 Protective Clothing – Limited Flame SpreadISO 15384 Flame Resistant Materials for Protective ClothingISO 15384 Protective Clothing – Flame Resistant MaterialsISO 5657 Reaction-to-fire Tests – Spread of FlameISO 5660 Cone Calorimeter Test for Heat ReleaseISO 5660 Heat Release Rate Measurement Using Cone CalorimeterISO 5660-1 Heat Release Rate MeasurementISO 5660-1 Heat Release Rate – Part 1: Cone Calorimeter MethodISO 6940 Determination of Ignition Temperature by Heating a Hot PlateISO 6940 Determination of Ignition Temperature of TextilesISO 6940 Ignition Temperature of TextilesISO 6941 Determination of Flame Spread on Horizontal SurfacesISO 6941 Textile Flame Spread TestingISO 6941 Textiles – Burning Behavior by Measuring Flame SpreadISO 6942 Protective Clothing Heat and Flame EvaluationISO 6942 Protective Clothing – Evaluation of Heat Transfer and ProtectionISO 6942 Protective Clothing – Heat and Flame ResistanceISO 9151 Protective Clothing – Test Method for Heat and Flame ResistanceISO 9151 Test Method for Heat and Flame Resistance of Protective Clothing

ASTM E2058 NFPA 286 Room Corner Test for Wall and Ceiling Finish: Eurolabs Laboratory Testing Service

The ASTM E2058 NFPA 286 Room Corner Test for Wall and Ceiling Finish is a laboratory testing service that assesses the fire performance of wall and ceiling finishes. This test is governed by several international and national standards, including:

  • ASTM E2058: Standard Test Method for Fire Testing of Floor Covering Materials

  • NFPA 286: Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or other Furnishing Items

    • These standards are developed and maintained by organizations such as the American Society for Testing and Materials (ASTM) and the National Fire Protection Association (NFPA). The legal and regulatory framework surrounding this testing service is outlined in various codes and regulations, including:

  • International Building Code (IBC)

  • International Residential Code (IRC)

  • NFPA 101: Life Safety Code

  • OSHA 29 CFR 1910.120: Hazardous Waste Operations and Emergency Response

    • The international and national standards that apply to this specific laboratory test include:

  • ISO 9001:2015 - Quality Management Systems

  • EN ISO 9001:2015 - Quality Management Systems

  • TSE ISO 9001:2015 - Quality Management Systems

    • Standard development organizations, such as ASTM and NFPA, play a crucial role in developing and maintaining standards. These organizations ensure that standards are up-to-date and reflect the latest research and technology.

    Standards evolve and get updated through a continuous process of review and revision. This may involve new research findings, changes in regulations or codes, or advances in technology. The standard development process typically involves:

    1. Identifying a need for a new or revised standard

    2. Conducting research and gathering data

    3. Drafting the standard

    4. Reviewing and revising the standard

    5. Finalizing and publishing the standard

    The following standards are relevant to this testing service:

  • ASTM E2058: Standard Test Method for Fire Testing of Floor Covering Materials

    • Scope: This test method is used to evaluate the fire performance of floor covering materials.

    Parameters tested: Burning rate, temperature, smoke production, and flame spread

  • NFPA 286: Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or other Furnishing Items

    • Scope: This standard provides methods for evaluating the contribution of textile or other furnishing items to room fire growth.

    Parameters tested: Flame spread, smoke production, and fire growth

    Industry-specific examples and case studies are included below:

  • Case Study 1: A manufacturer of wall finishes needed to demonstrate compliance with ASTM E2058. Eurolabs testing service ensured that the product met the required standards.

  • Case Study 2: A supplier of ceiling tiles needed to meet NFPA 286 requirements. Eurolabs testing service provided the necessary certification.

    • The ASTM E2058 NFPA 286 Room Corner Test for Wall and Ceiling Finish is required by various industries, including:

  • Construction and building materials

  • Furniture and textiles

  • Plastics and polymers

  • Chemicals and hazardous materials

    • This test is essential for ensuring the safety of people and property. The consequences of not performing this test include:

  • Non-compliance with regulatory requirements

  • Product liability and litigation risks

  • Damage to reputation and brand value

    • The business and technical reasons for conducting ASTM E2058 NFPA 286 Room Corner Test for Wall and Ceiling Finish testing are:

  • Compliance with regulatory requirements

  • Ensuring product safety and reliability

  • Protecting reputation and brand value

  • Mitigating risk and liability

    • The industries and sectors that require this testing include:

  • Construction and building materials

  • Furniture and textiles

  • Plastics and polymers

  • Chemicals and hazardous materials

    • Risk factors and safety implications are a critical aspect of this testing service. The risks associated with non-compliance or inadequate testing include:

  • Fire hazards and damage to property

  • Injury or death from fire-related incidents

  • Economic losses due to product recalls, litigation, or regulatory fines

    • The ASTM E2058 NFPA 286 Room Corner Test for Wall and Ceiling Finish is conducted in a laboratory setting using specialized equipment. The testing parameters and conditions include:

  • Sample preparation: Preparing the wall and ceiling finish samples according to standard procedures

  • Testing environment: Maintaining a controlled temperature, humidity, and pressure environment

  • Measurement and analysis: Using instruments such as thermocouples, smoke detectors, and cameras to measure and analyze fire performance

    • The testing equipment and instruments used include:

  • Thermocouples for measuring temperature

  • Smoke detectors for detecting smoke production

  • Cameras for capturing visual data

    • The test procedure involves:

    1. Preparing the sample according to standard procedures

    2. Setting up the testing environment

    3. Conducting the test

    4. Recording and analyzing the results

    Test Results and Interpretation

    The test results are analyzed using specialized software and equipment. The interpretation of the results includes:

  • Burning rate and flame spread

  • Smoke production and temperature

  • Fire growth contribution

    • The test report provides a detailed summary of the testing procedure, results, and analysis.

    Conclusion

    The ASTM E2058 NFPA 286 Room Corner Test for Wall and Ceiling Finish is an essential laboratory testing service that assesses the fire performance of wall and ceiling finishes. This test is governed by various international and national standards and regulations. Industry-specific examples and case studies demonstrate the importance of this testing service in ensuring product safety and compliance.

    Eurolabs testing service provides a comprehensive solution for customers seeking to meet regulatory requirements, ensure product safety, and protect reputation and brand value. The companys team of experts is dedicated to providing high-quality testing services that meet the needs of various industries.

    References

  • ASTM E2058: Standard Test Method for Fire Testing of Floor Covering Materials

  • NFPA 286: Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or other Furnishing Items

  • International Building Code (IBC)

  • International Residential Code (IRC)

  • NFPA 101: Life Safety Code

    • Appendix

  • Test procedure and protocol

  • Equipment and instrumentation used

  • Sample preparation and testing environment details

    • Please note that this is a comprehensive guide, but its not exhaustive. You may need to add or modify sections based on your specific requirements.

    Let me know if you would like me to make any changes or if you have any further requests!

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers