EUROLAB
iso-6941-determination-of-flame-spread-on-horizontal-surfaces
Flammability Testing ASTM D1230 Flammability of Textile Fabrics by Use of a Radiant Heat Energy SourceASTM D1230 Radiant Heat Test for Textile FlammabilityASTM D1230-17 Standard Test Method for Flammability of Fabrics by Radiant HeatASTM D3675 Flammability of Textile Fabrics Using a Vertical Strip MethodASTM D3801 Rate of Burning of PlasticsASTM D3801 Standard Test Method for Measuring Rate of Burning of PlasticsASTM D5208 Open Flame Flammability TestASTM D5208 Standard Test Method for Flammability of Textiles by Open FlameASTM D5802 Smoldering Ignition Resistance of TextilesASTM D6413 Evaluation of Flame Resistance After LaunderingASTM D6413 Flame Resistance of Fabrics After Multiple LaunderingASTM D6413 Standard Test Method for Flame Resistance of Textiles (Vertical Test)ASTM D6413 Vertical Flame Resistance TestASTM D6413 Vertical Flame Test for FabricsASTM D6413 Vertical Flammability Test of TextilesASTM D6413-21 Vertical Flame TestASTM D6413-21 Vertical Flame Test of TextilesASTM E1353 Flammability of MattressesASTM E1353 Standard Test Method for Flammability of MattressesASTM E1354 Cone Calorimeter Test for Heat Release RateASTM E1354 Cone Calorimeter Test MethodASTM E162 Surface Flammability by Radiant HeatASTM E162 Surface Flammability of Materials Using a Radiant Heat Energy SourceASTM E2058 NFPA 286 Room Corner TestASTM E2058 NFPA 286 Room Corner Test for Wall and Ceiling FinishASTM E648 Critical Radiant Flux of Floor Covering SystemsASTM E84 Steiner Tunnel TestASTM E84 Surface Burning Characteristics of Building Materials (Steiner Tunnel Test)ASTM E84-20 Standard Test Method for Surface Burning CharacteristicsASTM F1506 Performance of Materials Used in Protective ClothingASTM F1506 Protective Clothing for Electric Arc ProtectionASTM F1930 Children's Sleepwear Flammability TestASTM F1930 Flammability Test of Children's Sleepwear FabricsASTM F2712 Fire Fighter Protective Ensemble TestASTM F2712 Flammability of Protective Ensembles for Fire FightersISO 11925-1 Ignitability of Building Products with Direct Flame ContactISO 11925-2 Ignitability by Flame of Building ProductsISO 11925-2 Reaction to Fire Tests – Ignitability by FlameISO 11992 Vehicle Fire Test MethodsISO 11992 Vehicle Fire Testing StandardsISO 12127-1 Textile Fabrics – Determination of Burning BehaviorISO 13506 Determination of Smouldering Ignition ResistanceISO 13506 Smouldering Ignition Resistance of TextilesISO 13772 Burning Behavior of Protective ClothingISO 13772 Protective Clothing – Burning Behavior in Clothing AssembliesISO 15025 Limited Flame Spread Test for Protective ClothingISO 15025 Protective Clothing – Method for Limited Flame SpreadISO 15025 Surface Flammability of Textiles – Small Flame TestISO 15025 Surface Flammability of Textiles – Small Flame Test MethodISO 15025-1 Limited Flame Spread TestISO 15025-1 Protective Clothing – Limited Flame Spread – Small FlameISO 15025-1 Small Flame Test for Protective ClothingISO 15026 Protective Clothing – Evaluation of Flame ResistanceISO 15027 Protective Clothing – Limited Flame SpreadISO 15384 Flame Resistant Materials for Protective ClothingISO 15384 Protective Clothing – Flame Resistant MaterialsISO 5657 Reaction-to-fire Tests – Spread of FlameISO 5660 Cone Calorimeter Test for Heat ReleaseISO 5660 Heat Release Rate Measurement Using Cone CalorimeterISO 5660-1 Heat Release Rate MeasurementISO 5660-1 Heat Release Rate – Part 1: Cone Calorimeter MethodISO 6940 Determination of Ignition Temperature by Heating a Hot PlateISO 6940 Determination of Ignition Temperature of TextilesISO 6940 Ignition Temperature of TextilesISO 6941 Textile Flame Spread TestingISO 6941 Textiles – Burning Behavior by Measuring Flame SpreadISO 6942 Protective Clothing Heat and Flame EvaluationISO 6942 Protective Clothing – Evaluation of Heat Transfer and ProtectionISO 6942 Protective Clothing – Heat and Flame ResistanceISO 9151 Protective Clothing – Test Method for Heat and Flame ResistanceISO 9151 Test Method for Heat and Flame Resistance of Protective Clothing

Comprehensive Guide to ISO 6941 Determination of Flame Spread on Horizontal Surfaces Laboratory Testing Service

Standard-Related Information

ISO 6941 is a widely recognized standard that governs the laboratory testing of flame spread on horizontal surfaces. This standard is developed by the International Organization for Standardization (ISO) and is used globally in various industries to ensure compliance with regulatory requirements.

The legal and regulatory framework surrounding this testing service includes:

  • ISO 6941:2013(E)

  • ASTM E1628-17

  • EN ISO 5660-1:2015A1:2020

  • TSE 1134:2009

    • These standards specify the test method for determining the flame spread on horizontal surfaces, which is essential for assessing the fire performance of materials and products.

    The standard development organizations involved in this testing service are:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Standardization (CEN)

  • Turkish Standards Institution (TSE)

    • Standards evolve and get updated to reflect new technologies, research findings, and changing regulatory requirements. Eurolab stays up-to-date with the latest standards and ensures that our testing services comply with international and national regulations.

    The standard numbers and their scope are:

  • ISO 6941:2013(E) - Determination of flame spread on horizontal surfaces

  • ASTM E1628-17 - Standard test method for determining the flame spread rate on horizontal surface materials

  • EN ISO 5660-1:2015A1:2020 - Fire tests - Reaction to fire - Heat release rate (ISO 5660-1:2014)

  • TSE 1134:2009 - Determination of flame spread on horizontal surfaces

    • Standard Requirements and Needs

    The need for this specific test is driven by the importance of ensuring that materials and products comply with regulatory requirements regarding fire performance. The testing service is required to:

  • Assess the risk of fire spread on horizontal surfaces

  • Evaluate the effectiveness of fire protection measures

  • Ensure compliance with national and international regulations

    • Business and technical reasons for conducting ISO 6941 Determination of Flame Spread on Horizontal Surfaces testing include:

  • Ensuring product safety and reliability

  • Reducing the risk of liability and regulatory non-compliance

  • Improving market competitiveness through compliance with standards

  • Enhancing customer trust and confidence in products

    • Consequences of not performing this test can be severe, including:

  • Regulatory penalties and fines

  • Loss of business and reputation

  • Increased costs due to non-compliance

    • The industries and sectors that require this testing service include:

  • Construction and building materials

  • Textiles and apparel

  • Plastics and polymers

  • Automotive and aerospace

  • Electronics and electrical appliances

    • Risk factors and safety implications associated with this testing service include:

  • Fire hazards and risks to human life and property

  • Environmental impact of fire on ecosystems and wildlife

  • Economic consequences of non-compliance

    • Quality assurance and quality control aspects are critical in ensuring the accuracy and reliability of test results. This includes:

  • Calibration and validation procedures

  • Data collection and recording procedures

  • Measurement and analysis methods

  • Statistical considerations and sample size requirements

    • Test Conditions and Methodology

    The test is conducted using a specialized testing equipment, including:

  • Flame spread apparatus

  • Temperature sensors

  • Humidity control system

  • Pressure measurement system

    • Testing environment requirements include:

  • Temperature range: 20C to 40C (68F to 104F)

  • Relative humidity: 50 to 80

  • Atmospheric pressure: 1013 mbar 5

    • Sample preparation procedures involve:

  • Preparing test specimens according to the standard

  • Ensuring sample homogeneity and consistency

    • Testing parameters and conditions include:

  • Flame spread rate (m/min)

  • Heat release rate (kW/m²)

  • Smoke density index (SDI)

    • Measurement and analysis methods involve:

  • Data acquisition systems

  • Software for data processing and analysis

  • Statistical calculations and modeling

    • Calibration and validation procedures are essential to ensure the accuracy of test results. This includes:

  • Calibration of testing equipment according to manufacturers instructions

  • Validation of testing procedure using reference materials and samples

    • Quality control measures during testing include:

  • Regular calibration and maintenance of testing equipment

  • Quality checks on data collection and recording procedures

  • Statistical analysis and modeling of test results

    • Data collection and recording procedures involve:

  • Manual or automated data acquisition systems

  • Data logging software for real-time monitoring

  • Storage and retrieval of test data in accordance with regulatory requirements

    • Testing timeframes and duration vary depending on the type of material being tested. Sample size requirements and statistical considerations are critical to ensure reliable results.

    Test Reporting and Documentation

    Test results are documented and reported according to international standards, including:

  • ISO 6941:2013(E)

  • ASTM E1628-17

  • EN ISO 5660-1:2015A1:2020

    • Reporting requirements include:

  • Test summary and conclusions

  • Data tables and graphs

  • Statistical analysis and modeling

  • Certification of compliance with regulatory requirements

    • Conclusion

    ISO 6941 Determination of Flame Spread on Horizontal Surfaces laboratory testing service is essential for ensuring product safety, reliability, and compliance with regulatory requirements. Eurolabs expertise in this field ensures that our clients receive accurate and reliable test results that meet international standards.

    By choosing Eurolab as your partner for ISO 6941 testing services, you can:

  • Ensure compliance with national and international regulations

  • Reduce the risk of liability and regulatory non-compliance

  • Enhance customer trust and confidence in products

  • Improve market competitiveness through compliance with standards

    • Contact us today to learn more about our ISO 6941 testing services.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers