EUROLAB
iso-12048-puncture-resistance-testing-of-packaging
Packaging Mechanical Performance ASTM D1974 Performance Testing of Flexible PackagingASTM D2579 Drop Testing of Corrugated BoxesASTM D2579 Drop Testing of PackagingASTM D2656 Seal Strength Testing of Flexible PackagingASTM D3951 Performance Evaluation of Packaging SystemsASTM D3987 Water Resistance of Paperboard PackagingASTM D4168 Packaging Performance under Simulated HandlingASTM D4168-12 Handling and Transit Simulation TestingASTM D4169 Performance Testing of Shipping ContainersASTM D4577 Seal Strength of Flexible PackagesASTM D4727 Performance Testing of Transit PackagingASTM D4727-18 Performance Testing of Corrugated BoxesASTM D5374 Vibration Resistance of PackagingASTM D642 Compression Resistance of Corrugated BoxesASTM D6575 Compression Testing of Corrugated BoardASTM D7438 Flexibility Testing of Packaging MaterialsASTM D781 Compression Strength of PaperboardASTM D829 Seal Strength Testing of Flexible PackagingASTM D999 Dynamic Load Testing of PackagingASTM D999-15 Dynamic Load Testing of PackagesASTM D999-21 Dynamic Load Testing for Shipping PackagesASTM F1306 Impact Resistance Testing of PackagingASTM F1306-16 Impact Resistance TestingASTM F2256 Tear Resistance of Plastic FilmsISO 11607-1 Packaging Mechanical Integrity TestingISO 11607-2 Packaging Integrity TestingISO 1184 Puncture Resistance of Flexible PackagingISO 1184 Puncture Resistance TestingISO 12048 Puncture Resistance of Packaging FilmsISO 12625-3 Mechanical Testing of Tissue and Crepe PapersISO 12625-3 Mechanical Testing of Tissue PapersISO 13820 Tensile Testing of Packaging MaterialsISO 13820 Tensile Testing of Plastic FilmsISO 16195 Compression Testing of Paper and BoardISO 16195 Compression Testing of Paper PackagingISO 1924-2 Tensile Strength of Paper and BoardISO 1924-3 Tensile Testing of Paper and BoardISO 20362 Compression Testing of PackagingISO 22000 Food Packaging Mechanical PerformanceISO 28780 Mechanical Properties of Flexible PackagingISO 28780 Mechanical Properties of Polymer FilmsISO 3035 Bursting Strength of Paper and BoardISO 3035 Bursting Strength Test of PaperboardISO 4593 Tensile Properties of Plastic FilmsISO 4593 Tensile Testing of FilmsISO 554 Puncture Resistance of PaperboardISO 554 Puncture Resistance Test of PaperboardISO 6383-2 Bending Resistance of PaperboardISO 6595 Tear Resistance TestingISTA 1A Distribution Simulation TestingISTA 1B Distribution Simulation with Drop TestISTA 1C Distribution Simulation and Drop TestingISTA 2A Integrity Testing of Packaging SystemsISTA 2B Simulation Testing of Transport PackagingISTA 2C Simulation Testing of Transport PackagingISTA 3A Vibration Testing for Transport PackagingISTA 3B Mechanical Shock TestingISTA 3D Shock and Vibration ConditioningISTA 3E Mechanical Shock and Vibration TestingISTA 3F Shock and Vibration Testing of PackagingISTA 5A Environmental Conditioning TestingISTA 5B Environmental Conditioning of PackagingISTA 6-A Edge Crush Resistance of Corrugated BoardISTA 6-B Edge Crush Test ValidationISTA 6-C Edge Crush Test EvaluationISTA 6-D Edge Crush Test for Corrugated FiberboardISTA 6-FE Edge Crush Test of Corrugated BoardISTA 6-FR Flat Crush Test of Corrugated BoardISTA 7B Environmental Conditioning for PackagingISTA 7D Thermal Conditioning of PackagingISTA 7E Environmental Conditioning and Mechanical TestingISTA 7F Thermal Conditioning and Mechanical Testing

Comprehensive Guide to ISO 12048 Puncture Resistance Testing of Packaging: A Laboratory Testing Service Provided by Eurolab

Standard-Related Information

ISO 12048 is a widely recognized international standard that specifies the requirements for puncture resistance testing of packaging materials. The standard is developed and published by the International Organization for Standardization (ISO), in collaboration with national standards organizations such as ASTM, EN, TSE, and others.

The legal and regulatory framework surrounding ISO 12048 Puncture Resistance Testing of Packaging is governed by various international and national regulations. These include:

  • European Unions Packaging Directive (94/62/EC)

  • United States Federal Trade Commission (FTC) guidelines for packaging labeling

  • International Organization for Standardization (ISO) standards for packaging materials

    • Internationally recognized standards that apply to this specific laboratory test include:

  • ISO 12048:2017 Puncture resistance of flexible containers used in the packaging of liquids and semi-liquids

  • ASTM D6243-18 Standard Test Method for Determining the Puncture Resistance of Flexible Containers Used in the Packaging of Liquids and Semi-Liquids

  • EN 2830:2019 Puncture resistance of flexible containers used in the packaging of liquids and semi-liquids

    • Standard development organizations play a crucial role in maintaining and updating standards. These organizations include:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Standardization (CEN)

  • Turkish Standards Institution (TSE)

    • Standards evolve through a rigorous process involving committee review, public comment periods, and approval by governing bodies.

    Standard Requirements and Needs

    The specific test requirements for ISO 12048 Puncture Resistance Testing of Packaging are as follows:

    1. Test specimens: The material to be tested shall be in the form of a flat sheet or a cylindrical container with a specified thickness.

    2. Test equipment: A puncture resistance tester conforming to ISO 28561-2 shall be used.

    3. Test conditions: The test shall be conducted at ambient temperature (23C 2C) and humidity (50 10).

    4. Sample preparation: The material shall be prepared according to the manufacturers instructions.

    This specific test is required for various industries, including:

  • Packaging manufacturers

  • Food and beverage producers

  • Pharmaceuticals companies

  • Cosmetics and personal care products

    • The consequences of not performing this test include:

  • Inadequate packaging performance leading to product damage or leakage

  • Non-compliance with regulatory requirements

  • Reduced product shelf life and increased waste

  • Potential safety risks for consumers

    • Test Conditions and Methodology

    Here is a step-by-step explanation of the testing procedure:

    1. Sample preparation: The material shall be prepared according to the manufacturers instructions.

    2. Test equipment setup: The puncture resistance tester shall be calibrated and validated prior to testing.

    3. Test specimen placement: The test specimen shall be placed on the puncture resistance tester in accordance with the standard.

    4. Puncture force application: A puncture force of 100 N (or as specified by the manufacturer) shall be applied to the test specimen at a rate of 5 mm/s.

    5. Measurement and analysis: The puncture force and displacement shall be measured and recorded using a data acquisition system.

    Test Reporting and Documentation

    Eurolabs test reporting and documentation procedures ensure clarity, accuracy, and compliance with international standards. Test results are documented in a report format that includes:

  • Sample identification

  • Testing parameters (temperature, humidity, etc.)

  • Measured values (puncture force, displacement)

  • Calculated values (puncture resistance)

  • Results interpretation

    • The reporting format is based on the ISO 17025:2018 standard for laboratory testing and calibration.

    Why This Test Should Be Performed

    Performing ISO 12048 Puncture Resistance Testing of Packaging provides numerous benefits, including:

    1. Quality assurance: Ensures packaging materials meet regulatory requirements

    2. Risk assessment and mitigation: Identifies potential safety risks associated with packaging performance

    3. Compliance benefits: Demonstrates compliance with international standards and regulations

    4. Competitive advantages: Enhances product shelf life, reduces waste, and increases customer confidence

    5. Cost savings: Reduces the risk of product damage or leakage leading to costly recalls and rework

    Why Eurolab Should Provide This Service

    Eurolab is well-positioned to provide this laboratory testing service due to its:

    1. Expertise and experience: Extensive knowledge in packaging materials and laboratory testing

    2. State-of-the-art equipment: Up-to-date, calibrated, and validated testing equipment

    3. Accreditation and certification: ISO 17025:2018 accreditation ensures compliance with international standards

    4. International recognition and partnerships: Collaborations with global organizations ensure seamless communication and reporting

    Additional Information

    Eurolab offers a comprehensive range of laboratory testing services for packaging materials, including:

  • Puncture resistance

  • Tear resistance

  • Water vapor transmission rate (WVTR)

  • Oxygen transmission rate (OTR)

    • Eurolabs experts are available to assist with any questions or concerns regarding ISO 12048 Puncture Resistance Testing of Packaging.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers