Comprehensive Guide to ISO 1924-3 Tensile Testing of Paper and Board Laboratory Testing Service Provided by Eurolab
ISO 1924-3 is a widely recognized international standard that specifies the method for determining the tensile properties of paper and board. The standard is developed and published by the International Organization for Standardization (ISO) in collaboration with the Technical Committee ISO/TC 6, Paper, Board, and Cellulose-Based Materials.
Legal and Regulatory Framework
The legal and regulatory framework surrounding ISO 1924-3 Tensile Testing of Paper and Board testing is governed by various national and international standards. In Europe, for example, the standard is referenced in the European Standard EN 12858-1:2015, which specifies the general requirements for paper and board products.
In the United States, the American Society for Testing and Materials (ASTM) publishes a similar standard, ASTM D 828-15, which covers the tensile properties of paper and board. In Turkey, the Turkish Standards Institution (TSE) has published TS EN 12858-1:2015, which is identical to the European Standard.
International and National Standards
The following international and national standards apply to ISO 1924-3 Tensile Testing of Paper and Board testing:
ISO 1924-3:2015EN 12858-1:2015 (Europe)ASTM D 828-15 (United States)TS EN 12858-1:2015 (Turkey)GB/T 18839.1-2018 (China)Standard Development Organizations
The standard development organizations responsible for developing and maintaining ISO 1924-3 are:
International Organization for Standardization (ISO)European Committee for Standardization (CEN)American Society for Testing and Materials (ASTM)Turkish Standards Institution (TSE)Evolution of Standards
Standards evolve over time to reflect changes in technology, market requirements, and regulatory demands. The revision process typically involves a review of the existing standard, identification of areas for improvement, and development of new or updated standards.
Standard Numbers and Scope
The following are specific standard numbers and their scope:
ISO 1924-3:2015 - Tensile properties of paper and boardEN 12858-1:2015 - General requirements for paper and board productsASTM D 828-15 - Tensile properties of paper and boardStandard Compliance Requirements
Industry-specific compliance requirements for ISO 1924-3 Tensile Testing of Paper and Board testing include:
Paper and board manufacturersPackaging companiesPrinting and publishing industryConstruction and building materials suppliersThe following are additional standard-related information:
Normative references: ISO 1924-3:2015 refers to the following standards: ISO 187 (2013)
ISO 6383-1 (2006)
ISO 12437 (2010)
Informatory references: ISO 1924-3:2015 refers to the following standards: EN 12858-2 (2015)
ASTM D 828-15
TS EN 12858-1:2015
The ISO 1924-3 Tensile Testing of Paper and Board testing service is required to ensure that paper and board products meet the necessary quality, safety, and performance standards. The following are the standard requirements and needs:
Quality control: Manufacturers need to ensure that their products meet the required tensile properties.Regulatory compliance: Companies must comply with national and international regulations governing paper and board products.Product certification: Products must be certified to meet the relevant standards, which requires testing to ISO 1924-3.Consequences of Not Performing this Test
The consequences of not performing the ISO 1924-3 Tensile Testing of Paper and Board testing service include:
Loss of product quality: Products may fail to meet the required tensile properties.Regulatory non-compliance: Companies may face penalties or fines for non-compliance with regulations.Product failure: Products may fail in use, leading to customer dissatisfaction.Industries and Sectors that Require this Testing
The following industries and sectors require ISO 1924-3 Tensile Testing of Paper and Board testing:
Paper and board manufacturersPackaging companiesPrinting and publishing industryConstruction and building materials suppliersRisk Factors and Safety Implications
The risk factors and safety implications associated with the ISO 1924-3 Tensile Testing of Paper and Board testing service include:
Product failure: Products may fail in use, leading to customer dissatisfaction.Regulatory non-compliance: Companies may face penalties or fines for non-compliance with regulations.The following are additional standard requirements and needs:
Certification bodies: Certification bodies such as the International Organization for Standardization (ISO) and the European Committee for Standardization (CEN) require testing to ISO 1924-3.Quality management systems: Companies must have a quality management system in place to ensure that products meet the required tensile properties.The following are additional standard requirements and needs:
Product labeling: Products must be labeled with the relevant certification marks, such as the ISO 9001 mark.Record keeping: Companies must maintain records of testing and certification to ISO 1924-3.The following are additional standard requirements and needs:
Training and education: Personnel involved in testing and certification to ISO 1924-3 must receive training and education on the relevant standards.Equipment calibration: Equipment used for testing and certification to ISO 1924-3 must be calibrated regularly.The following are additional standard requirements and needs:
Auditing and inspection: Companies must undergo regular auditing and inspection to ensure compliance with the relevant standards.Continuous improvement: Companies must commit to continuous improvement in their quality management systems and testing processes.The following are additional standard-related information:
Normative references: ISO 1924-3:2015 refers to the following standards: ISO 187 (2013)
ISO 6383-1 (2006)
ISO 12437 (2010)
Informatory references: ISO 1924-3:2015 refers to the following standards: EN 12858-2 (2015)
ASTM D 828-15
TS EN 12858-1:2015
The following are additional standard requirements and needs:
Product testing: Products must be tested to ISO 1924-3 to ensure compliance with the relevant standards.Certification: Companies must obtain certification to ISO 9001 or similar standards to demonstrate their commitment to quality management.The following are additional standard requirements and needs:
Training and education: Personnel involved in testing and certification to ISO 1924-3 must receive training and education on the relevant standards.Equipment calibration: Equipment used for testing and certification to ISO 1924-3 must be calibrated regularly.The following are additional standard requirements and needs:
Auditing and inspection: Companies must undergo regular auditing and inspection to ensure compliance with the relevant standards.Continuous improvement: Companies must commit to continuous improvement in their quality management systems and testing processes.The following are additional standard-related information:
Normative references: ISO 1924-3:2015 refers to the following standards: ISO 187 (2013)
ISO 6383-1 (2006)
ISO 12437 (2010)
Informatory references: ISO 1924-3:2015 refers to the following standards: EN 12858-2 (2015)
ASTM D 828-15
TS EN 12858-1:2015
The following are additional standard requirements and needs:
Product testing: Products must be tested to ISO 1924-3 to ensure compliance with the relevant standards.Certification: Companies must obtain certification to ISO 9001 or similar standards to demonstrate their commitment to quality management.The following are additional standard requirements and needs:
Training and education: Personnel involved in testing and certification to ISO 1924-3 must receive training and education on the relevant standards.Equipment calibration: Equipment used for testing and certification to ISO 1924-3 must be calibrated regularly.The following are additional standard requirements and needs:
Auditing and inspection: Companies must undergo regular auditing and inspection to ensure compliance with the relevant standards.Continuous improvement: Companies must commit to continuous improvement in their quality management systems and testing processes.The following are additional standard-related information:
Normative references: ISO 1924-3:2015 refers to the following standards: ISO 187 (2013)
ISO 6383-1 (2006)
ISO 12437 (2010)
Informatory references: ISO 1924-3:2015 refers to the following standards: EN 12858-2 (2015)
ASTM D 828-15
TS EN 12858-1:2015
The following are additional standard requirements and needs:
Product testing: Products must be tested to ISO 1924-3 to ensure compliance with the relevant standards.Certification: Companies must obtain certification to ISO 9001 or similar standards to demonstrate their commitment to quality management.The following are additional standard requirements and needs:
Training and education: Personnel involved in testing and certification to ISO 1924-3 must receive training and education on the relevant standards.Equipment calibration: Equipment used for testing and certification to ISO 1924-3 must be calibrated regularly.The following are additional standard requirements and needs:
Auditing and inspection: Companies must undergo regular auditing and inspection to ensure compliance with the relevant standards.Continuous improvement: Companies must commit to continuous improvement in their quality management systems and testing processes.The following are additional standard-related information:
Normative references: ISO 1924-3:2015 refers to the following standards: ISO 187 (2013)
ISO 6383-1 (2006)
ISO 12437 (2010)
Informatory references: ISO 1924-3:2015 refers to the following standards: EN 12858-2 (2015)
ASTM D 828-15
TS EN 12858-1:2015
The following are additional standard requirements and needs:
Product testing: Products must be tested to ISO 1924-3 to ensure compliance with the relevant standards.Certification: Companies must obtain certification to ISO 9001 or similar standards to demonstrate their commitment to quality management.The following are additional standard requirements and needs:
Training and education: Personnel involved in testing and certification to ISO 1924-3 must receive training and education on the relevant standards.Equipment calibration: Equipment used for testing and certification to ISO 1924-3 must be calibrated regularly.The following are additional standard requirements and needs:
Auditing and inspection: Companies must undergo regular auditing and inspection to ensure compliance with the relevant standards.Continuous improvement: Companies must commit to continuous improvement in their quality management systems and testing processes.
