EUROLAB
iso-13820-tensile-testing-of-plastic-films
Packaging Mechanical Performance ASTM D1974 Performance Testing of Flexible PackagingASTM D2579 Drop Testing of Corrugated BoxesASTM D2579 Drop Testing of PackagingASTM D2656 Seal Strength Testing of Flexible PackagingASTM D3951 Performance Evaluation of Packaging SystemsASTM D3987 Water Resistance of Paperboard PackagingASTM D4168 Packaging Performance under Simulated HandlingASTM D4168-12 Handling and Transit Simulation TestingASTM D4169 Performance Testing of Shipping ContainersASTM D4577 Seal Strength of Flexible PackagesASTM D4727 Performance Testing of Transit PackagingASTM D4727-18 Performance Testing of Corrugated BoxesASTM D5374 Vibration Resistance of PackagingASTM D642 Compression Resistance of Corrugated BoxesASTM D6575 Compression Testing of Corrugated BoardASTM D7438 Flexibility Testing of Packaging MaterialsASTM D781 Compression Strength of PaperboardASTM D829 Seal Strength Testing of Flexible PackagingASTM D999 Dynamic Load Testing of PackagingASTM D999-15 Dynamic Load Testing of PackagesASTM D999-21 Dynamic Load Testing for Shipping PackagesASTM F1306 Impact Resistance Testing of PackagingASTM F1306-16 Impact Resistance TestingASTM F2256 Tear Resistance of Plastic FilmsISO 11607-1 Packaging Mechanical Integrity TestingISO 11607-2 Packaging Integrity TestingISO 1184 Puncture Resistance of Flexible PackagingISO 1184 Puncture Resistance TestingISO 12048 Puncture Resistance of Packaging FilmsISO 12048 Puncture Resistance Testing of PackagingISO 12625-3 Mechanical Testing of Tissue and Crepe PapersISO 12625-3 Mechanical Testing of Tissue PapersISO 13820 Tensile Testing of Packaging MaterialsISO 16195 Compression Testing of Paper and BoardISO 16195 Compression Testing of Paper PackagingISO 1924-2 Tensile Strength of Paper and BoardISO 1924-3 Tensile Testing of Paper and BoardISO 20362 Compression Testing of PackagingISO 22000 Food Packaging Mechanical PerformanceISO 28780 Mechanical Properties of Flexible PackagingISO 28780 Mechanical Properties of Polymer FilmsISO 3035 Bursting Strength of Paper and BoardISO 3035 Bursting Strength Test of PaperboardISO 4593 Tensile Properties of Plastic FilmsISO 4593 Tensile Testing of FilmsISO 554 Puncture Resistance of PaperboardISO 554 Puncture Resistance Test of PaperboardISO 6383-2 Bending Resistance of PaperboardISO 6595 Tear Resistance TestingISTA 1A Distribution Simulation TestingISTA 1B Distribution Simulation with Drop TestISTA 1C Distribution Simulation and Drop TestingISTA 2A Integrity Testing of Packaging SystemsISTA 2B Simulation Testing of Transport PackagingISTA 2C Simulation Testing of Transport PackagingISTA 3A Vibration Testing for Transport PackagingISTA 3B Mechanical Shock TestingISTA 3D Shock and Vibration ConditioningISTA 3E Mechanical Shock and Vibration TestingISTA 3F Shock and Vibration Testing of PackagingISTA 5A Environmental Conditioning TestingISTA 5B Environmental Conditioning of PackagingISTA 6-A Edge Crush Resistance of Corrugated BoardISTA 6-B Edge Crush Test ValidationISTA 6-C Edge Crush Test EvaluationISTA 6-D Edge Crush Test for Corrugated FiberboardISTA 6-FE Edge Crush Test of Corrugated BoardISTA 6-FR Flat Crush Test of Corrugated BoardISTA 7B Environmental Conditioning for PackagingISTA 7D Thermal Conditioning of PackagingISTA 7E Environmental Conditioning and Mechanical TestingISTA 7F Thermal Conditioning and Mechanical Testing

Comprehensive Guide to ISO 13820 Tensile Testing of Plastic Films Laboratory Testing Service Provided by Eurolab

ISO 13820 is the international standard for tensile testing of plastic films, which provides guidelines and requirements for the testing procedure, equipment, and personnel involved in the process. This standard is published by the International Organization for Standardization (ISO) and is widely recognized as the benchmark for tensile testing of plastic films.

1.1 Legal and Regulatory Framework

The legal and regulatory framework surrounding ISO 13820 Tensile Testing of Plastic Films testing is governed by various national and international standards, regulations, and laws. These include:

  • International standards: ISO 13820

  • National standards: EN 13820 (European Union), ASTM D882 (USA)

  • Regulations: EU Regulation 1935/2004 on Food Contact Materials, FDA guidelines for food contact materials in the USA

  • Laws: Consumer Product Safety Act (CPSC) in the USA, EU General Product Safety Directive

    • 1.2 Standard Development Organizations and Their Role

    Standard development organizations play a crucial role in creating and maintaining standards. These organizations include:

  • International Organization for Standardization (ISO)

  • European Committee for Standardization (CEN)

  • American Society for Testing and Materials (ASTM)

  • Turkish Standards Institution (TSE)

    • These organizations work together to create, review, and update standards to ensure that they remain relevant and effective.

    1.3 Evolution of Standards

    Standards evolve over time as new technologies emerge, and existing ones are improved upon. This process involves:

  • Reviewing current standards for accuracy and relevance

  • Identifying areas for improvement or updates

  • Developing new standards or revising existing ones

  • Finalizing and publishing the updated standard

    • 1.4 Standard Numbers and Scope

    The following are some of the relevant standard numbers and their scope:

  • ISO 13820: Tensile testing of plastic films - Method of test at ambient temperature (2003)

  • EN 13820: Plastics - Determination of tensile properties of flexible materials - Part 1: General principles (2004)

  • ASTM D882: Standard Test Method for Tensile Properties of Thin Plastic Sheeting (2017)

    • 1.5 Compliance Requirements

    Compliance with standards is mandatory in various industries, including:

  • Food packaging industry

  • Pharmaceutical industry

  • Medical device industry

  • Consumer goods industry

    • Failure to comply can result in fines, penalties, or even product recalls.

    ISO 13820 Tensile Testing of Plastic Films testing is required for various reasons:

    2.1 Technical Reasons

    The technical requirements for tensile testing include:

  • Ensuring the accuracy and reliability of test results

  • Validating material properties and performance

  • Assessing the safety and durability of plastic films

  • Meeting regulatory requirements

    • 2.2 Business Reasons

    Business reasons for conducting ISO 13820 Tensile Testing of Plastic Films testing include:

  • Enhancing product quality and performance

  • Increasing customer confidence and trust

  • Meeting regulatory requirements and industry standards

  • Reducing product recalls and liability claims

    • 2.3 Consequences of Not Performing the Test

    Not performing the test can result in:

  • Inaccurate or unreliable test results

  • Failure to meet regulatory requirements

  • Reduced product quality and performance

  • Decreased customer confidence and trust

    • The following are the detailed step-by-step procedures for conducting ISO 13820 Tensile Testing of Plastic Films testing:

    3.1 Sample Preparation

    Sample preparation involves:

  • Selecting a representative sample

  • Preparing the sample according to standard requirements

  • Ensuring proper storage and handling conditions

    • 3.2 Equipment and Instruments Used

    The equipment and instruments used for tensile testing include:

  • Tensile testing machine (e.g., Instron, MTS)

  • Load cell or force sensor

  • Data acquisition system (DAS) or computer software

  • Calibrated gauges and measuring devices

    • 3.3 Testing Environment Requirements

    Testing environment requirements include:

  • Temperature: 20C 2C (68F 4F)

  • Humidity: 50 10

  • Pressure: Ambient pressure

    • 3.4 Measurement and Analysis Methods

    Measurement and analysis methods involve:

  • Measuring tensile properties (e.g., stress, strain, elongation at break)

  • Calculating test results according to standard formulas

  • Verifying data against regulatory requirements and industry standards

    • 3.5 Calibration and Validation Procedures

    Calibration and validation procedures involve:

  • Calibrating equipment and instruments according to manufacturers instructions

  • Validating calibration results using certified reference materials or standards

  • Documenting calibration and validation records

    • Test reporting and documentation include:

  • Creating a test report that includes:

    • Test details (e.g., date, time, sample ID)

    Test results (e.g., tensile properties)

    Data analysis (e.g., statistical calculations)

  • Maintaining calibration and validation records

  • Storing test reports and records according to standard requirements

    • Qualification and training of personnel include:

  • Ensuring that personnel conducting tensile testing have the necessary education, experience, and training

  • Documenting personnel qualifications and training records

  • Maintaining certification or re-certification according to standard requirements

    • Continuous improvement and quality assurance involve:

  • Regularly reviewing and updating testing procedures and equipment

  • Evaluating test results against regulatory requirements and industry standards

  • Implementing corrective actions to address any deviations or non-conformities.

    • 7. CASE STUDIES AND SUCCESS STORIES

    Case studies and success stories from various industries, including food packaging, pharmaceuticals, medical devices, and consumer goods demonstrate the benefits of ISO 13820 Tensile Testing of Plastic Films testing:

  • Improved product quality and performance

  • Increased customer confidence and trust

  • Reduced product recalls and liability claims

    • 8. CONCLUSION

    In conclusion, ISO 13820 Tensile Testing of Plastic Films testing is a critical process that ensures the accuracy and reliability of test results, validates material properties and performance, and meets regulatory requirements. By following standard procedures and guidelines, industries can enhance product quality, increase customer confidence, and reduce liability claims.

    APPENDIX A: REFERENCES

  • ISO 13820: Tensile testing of plastic films - Method of test at ambient temperature (2003)

  • EN 13820: Plastics - Determination of tensile properties of flexible materials - Part 1: General principles (2004)

  • ASTM D882: Standard Test Method for Tensile Properties of Thin Plastic Sheeting (2017)

    • APPENDIX B: GLOSSARY OF TERMS

  • Calibration: The process of determining the accuracy of an instrument or equipment.

  • Certification: The process of verifying that a product, service, or personnel meets certain standards or requirements.

  • Compliance: Meeting regulatory requirements and industry standards.

  • Data analysis: The process of evaluating and interpreting test results.

    • This comprehensive guide provides detailed information on ISO 13820 Tensile Testing of Plastic Films testing, including standard-related information, technical requirements, business reasons, consequences of not performing the test, test conditions and methodology, measurement and analysis methods, calibration and validation procedures, qualification and training of personnel, continuous improvement and quality assurance, case studies, and success stories.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers