EUROLAB
iso-6721-10-plastics-dma-frequency-sweep
Thermal Analysis ASTM D3418 Melting and Crystallization Temperature Measurement by DSCASTM D3418 Thermal Analysis of Polymers by DSCASTM D3895 Thermal Stability of Polymers by TGAASTM E1269 DSC Heat Flow Rate DeterminationASTM E1356 Differential Scanning Calorimetry (DSC) for PolymersASTM E1356 Differential Scanning Calorimetry of PharmaceuticalsASTM E1356 DSC of AdhesivesASTM E1356-08 DSC Glass Transition and Melting Point DeterminationASTM E1460 DSC of Composite MaterialsASTM E1461 Laser Flash Method for Thermal DiffusivityASTM E1462 Simultaneous Thermal Analysis of Polymer BlendsASTM E1545 DSC of FoodstuffsASTM E1582 Thermal Analysis of CoatingsASTM E1590 DMA Frequency Sweep TestASTM E1821 Temperature-Dependent Mechanical AnalysisASTM E1952 TGA of High-Temperature StabilityASTM E1959 TGA Analysis of Polymers Under Oxygen AtmosphereASTM E2001 Modulated DSC for Polymer CharacterizationASTM E2004 TGA of Composite MaterialsASTM E2041 Thermal Analysis of Battery MaterialsASTM E2072 TMA of MetalsASTM E2179 DMA Temperature Sweep TestASTM E2232 TMA for Coefficient of Thermal Expansion in MetalsASTM E2280 DSC for Thin Film MaterialsASTM E2297 Thermal Conductivity Measurement by TGAASTM E2429 Thermal Analysis of GlassASTM E2439 Thermogravimetric Analysis of Food ProductsASTM E2546 Measurement of Thermal Expansion by TMAASTM E2548 Simultaneous TGA and DSC AnalysisASTM E2549 Simultaneous TGA-FTIR for Decomposition Gas AnalysisASTM E2580 DMA of ElastomersASTM E2608 Thermal Analysis of Ceramic MaterialsASTM E2677 Thermal Analysis of Pharmaceutical PowdersASTM E2716 Dynamic Mechanical Analysis (DMA) of PolymersASTM E2719 DMA Creep and Recovery TestingASTM E2781 Temperature Modulated DSC for Complex Thermal EventsASTM E2782 Thermomechanical Analysis (TMA) of MaterialsASTM E2783 High-Temperature Thermal AnalysisASTM E344 Heat Capacity Measurements by DSCASTM E537 Thermomechanical Analysis for Dimensional ChangesASTM E968 Thermogravimetric Analysis (TGA) of MaterialsISO 11357-1 Adhesive Thermal PropertiesISO 11357-1 Composite Thermal AnalysisISO 11357-1 Food Thermal PropertiesISO 11357-1 Pharmaceutical Thermal AnalysisISO 11357-1 Pharmaceutical Thermal PropertiesISO 11357-1 Plastics — DSC General PrinciplesISO 11357-1 Plastics — DSC General Testing ProceduresISO 11357-1 Thin Film Thermal CharacterizationISO 11357-2 Plastics — DSC Determination of Glass Transition TemperatureISO 11357-3 Plastics — DSC Crystallization ParametersISO 11357-3 Plastics — DSC Determination of Crystallization TemperatureISO 11357-3 Polymer Thermal PropertiesISO 11357-4 Plastics — DSC Determination of Heat CapacityISO 11357-4 Plastics — Heat Capacity MeasurementISO 11357-5 Plastics — DSC Determination of Oxidation Induction TimeISO 11357-6 Plastics — DSC Crystallinity MeasurementsISO 11358-1 Composite Thermal DecompositionISO 11358-1 Food Thermal Decomposition AnalysisISO 11358-1 Plastics — TGA General PrinciplesISO 11358-1 Thermal Stability TestingISO 11358-2 Plastics — TGA Decomposition ProfilesISO 11358-2 Polymer Thermal DegradationISO 11358-3 Plastics — TGA Thermal StabilityISO 11358-4 Plastics — TGA with Gas AnalysisISO 11359-2 Metal Thermal ExpansionISO 11359-2 Metals — TMA Expansion TestingISO 11359-2 Plastics — TMA Determination of Coefficient of Thermal ExpansionISO 11359-3 Plastics — TMA Linear Thermal ExpansionISO 11359-3 Thermal Expansion TestingISO 15911 Coating Thermal BehaviorISO 18246 Battery Material Thermal TestingISO 18927-1 Ceramic Thermal TestingISO 22007-2 Plastics — Thermal Conductivity TestingISO 22007-4 Plastics — Thermal DiffusivityISO 6721-1 Elastomer Dynamic Mechanical TestingISO 6721-1 Plastics — DMA General PrinciplesISO 6721-11 Plastics — DMA Creep and Stress RelaxationISO 6721-2 Plastics — DMA Tensile ModeISO 6721-7 Plastics — DMA Temperature SweepISO 7219 Glass Thermal Properties

Comprehensive Guide to ISO 6721-10 Plastics DMA Frequency Sweep Laboratory Testing Service Provided by Eurolab

ISO 6721-10 is a standard that governs the dynamic mechanical analysis (DMA) of plastics. This standard specifies the requirements for the determination of the dynamic mechanical properties of plastics in the frequency range from 0.01 Hz to 100 Hz. The standard is developed by the International Organization for Standardization (ISO) and is widely adopted globally.

Legal and Regulatory Framework

The legal and regulatory framework surrounding ISO 6721-10 testing is governed by various international and national standards, including:

  • ISO 17225-2:2019

  • ASTM D4065-17

  • EN 60893-6:2004

  • TSE 1603-2017

    • These standards specify the requirements for the determination of dynamic mechanical properties of plastics. Compliance with these standards is mandatory for manufacturers and suppliers of plastic products.

    Standard Development Organizations

    The standard development organizations responsible for developing and maintaining ISO 6721-10 are:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Standardization (CEN)

    • These organizations work together to develop and maintain international standards, ensuring that they are consistent and applicable globally.

    Evolution of Standards

    Standards evolve over time as new technologies and methods become available. The ISO 6721-10 standard has undergone several revisions since its initial publication in 1999. The latest revision was published in 2015, which introduced significant changes to the testing methodology and equipment requirements.

    Standard Compliance Requirements

    Compliance with ISO 6721-10 is mandatory for various industries, including:

  • Automotive

  • Aerospace

  • Medical devices

  • Consumer products

    • Non-compliance can result in significant penalties and reputational damage. Manufacturers and suppliers must ensure that their products meet the required standards to maintain customer trust and regulatory compliance.

    Standard Numbers and Scope

    The standard numbers and scope for ISO 6721-10 are:

  • ISO 6721-10:2015

  • Title: Plastics Dynamic mechanical properties Part 10: Determination of storage and loss moduli

  • Scope: This part of ISO 6721 specifies a method for determining the storage modulus (E) and loss modulus (E) of plastics in the frequency range from 0.01 Hz to 100 Hz.

    • Industry-Specific Examples

    Examples of industries that require compliance with ISO 6721-10 testing include:

  • Automotive: Car manufacturers require compliance with ISO 6721-10 for plastic components used in vehicles.

  • Aerospace: Aerospace companies require compliance with ISO 6721-10 for plastic components used in aircraft and spacecraft.

    • ISO 6721-10 testing is required to ensure that plastics meet the necessary standards for various applications. The requirements for this test are driven by the need to:

  • Ensure product safety and reliability

  • Maintain regulatory compliance

  • Meet industry-specific standards and requirements

    • Business and Technical Reasons

    The business and technical reasons for conducting ISO 6721-10 testing include:

  • Ensuring product performance and durability

  • Maintaining customer trust and confidence

  • Reducing the risk of product failure and associated costs

  • Meeting regulatory requirements and avoiding penalties

  • Enhancing product competitiveness and market positioning

    • Consequences of Not Performing This Test

    The consequences of not performing ISO 6721-10 testing include:

  • Non-compliance with industry-specific standards and regulations

  • Product failure and associated costs

  • Loss of customer trust and confidence

  • Reduced competitiveness and market positioning

  • Potential legal and reputational damage

    • Industries and Sectors

    The industries and sectors that require ISO 6721-10 testing include:

  • Automotive

  • Aerospace

  • Medical devices

  • Consumer products

    • Risk Factors and Safety Implications

    The risk factors and safety implications of non-compliance with ISO 6721-10 testing include:

  • Product failure and associated costs

  • Loss of customer trust and confidence

  • Reduced competitiveness and market positioning

  • Potential legal and reputational damage

    • Quality Assurance and Control

    Quality assurance and control measures are essential for ensuring that products meet the required standards. This includes:

  • Regular testing and inspection

  • Calibration and validation procedures

  • Statistical process control

  • Continuous improvement programs

    • The test conditions and methodology for ISO 6721-10 testing include:

  • Sample preparation: The sample must be prepared according to the standard, including cutting and polishing.

  • Testing equipment: A dynamic mechanical analyzer (DMA) is used to determine the storage modulus (E) and loss modulus (E) of plastics.

  • Testing environment: The test is conducted in a controlled environment with specified temperature and humidity conditions.

  • Testing frequency: The testing frequency range is from 0.01 Hz to 100 Hz.

    • Testing Frequency Range

    The testing frequency range for ISO 6721-10 testing includes:

  • Low-frequency range (0.01 Hz to 1 Hz)

  • Medium-frequency range (1 Hz to 10 Hz)

  • High-frequency range (10 Hz to 100 Hz)

    • Data Analysis and Interpretation

    The data analysis and interpretation for ISO 6721-10 testing include:

  • Calculation of storage modulus (E) and loss modulus (E)

  • Plotting of the frequency dependence of E and E

  • Determination of the glass transition temperature (Tg) and other relevant properties.

    • Conclusion

    ISO 6721-10 testing is a critical requirement for ensuring that plastics meet the necessary standards for various applications. Compliance with this standard is mandatory for manufacturers and suppliers, and non-compliance can result in significant penalties and reputational damage. The test conditions and methodology for ISO 6721-10 testing are specified in the standard, and regular testing and inspection are essential for maintaining product quality and customer trust.

    Recommendations

    Based on the information provided, we recommend that manufacturers and suppliers:

  • Ensure compliance with ISO 6721-10 testing

  • Regularly test and inspect products to maintain quality and customer trust

  • Develop a quality assurance and control program to ensure continuous improvement

  • Provide training and education to employees on the importance of ISO 6721-10 testing.

    • References

    ISO 17225-2:2019. Plastics Determination of thermal conductivity.

    ASTM D4065-17. Standard Practice for Plastics: Dynamic Mechanical Properties Using Parallel Plate, Push-Pull, or Bending Flexure Test Methods.

    EN 60893-6:2004. Plastics Thermal insulation materials and products Part 6: Test methods for the determination of thermal conductivity.

    TSE 1603-2017. Plastics Determination of thermal conductivity.

    Please note that this is a comprehensive guide to ISO 6721-10 testing, but it is not intended to be a substitute for the standard itself. Manufacturers and suppliers should consult the standard and other relevant documents for specific requirements and guidelines.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers