EUROLAB
astm-d618-conditioning-of-plastics-under-thermal-exposure
Thermal Resistance and Environmental Testing ASTM D1500 Heat Aging of Insulating MaterialsASTM D1929 Thermal Ignition of PolymersASTM D2240 Hardness Testing After Thermal ExposureASTM D2765 Thermal Stability of PolymersASTM D3039 Thermal Fatigue Testing of CompositesASTM D3045 Thermal Aging of PlasticsASTM D3895 Oxygen Index and Thermal StabilityASTM D3895 Thermal Degradation of PolymersASTM D4065 Dynamic Mechanical Thermal AnalysisASTM D412 Thermal Aging of ElastomersASTM D573 Heat Resistance of RubberASTM D618 Conditioning for Thermal AnalysisASTM D648 Heat Deflection Temperature TestingASTM D648 Heat Deflection Testing of PlasticsASTM D695 Compressive Strength After Thermal ExposureASTM D746 Brittleness Temperature TestingASTM D785 Thermal Deformation TestingASTM D7945 Thermal Stability of CompositesASTM E595 Thermal Emission TestingASTM F1278 Thermal Cycling of Medical PolymersASTM F1576 Thermal Conductivity TestingASTM F1980 Accelerated Aging of Sterilized Medical DevicesASTM F1980 Accelerated Thermal Aging of Medical DevicesASTM F1981 Thermal Compatibility of Medical AdhesivesASTM F1983 Thermal Compatibility of MaterialsASTM F1984 Thermal Cycling of Sterilized ProductsASTM F2009 Thermomechanical Testing of DevicesASTM F2461 Thermal Performance of Medical Device CoatingsASTM F2477 Thermal Aging of Silicone ElastomersASTM F2516 Thermal Conductivity of Medical Device MaterialsASTM F2621 Thermal Expansion TestingASTM F3001 Thermal Endurance of ImplantsASTM F392 Thermal Resistance of Medical TubingIEC 60068-2-1 Cold Temperature TestingIEC 60068-2-11 Salt Fog with Thermal ExposureIEC 60068-2-14 Rapid Thermal Shock TestingIEC 60068-2-14 Thermal Shock Test MethodIEC 60068-2-14 Thermal Shock TestingIEC 60068-2-2 Dry Heat TestIEC 60068-2-20 Low Temperature and Thermal CyclingIEC 60068-2-30 Damp Heat, Cyclic (12+12 hour)IEC 60068-2-38 Dry Heat, Steady StateIEC 60068-2-4 Rapid Change of TemperatureIEC 60068-2-5 Combined Environmental Testing Including ThermalIEC 60068-2-78 Damp Heat, Steady StateIEC 60529 Environmental Protection Ratings and Thermal ImpactIEC 60529 Protection Against Environmental Thermal ConditionsIEC 60529 Protection Degree and Thermal ImpactIEC 60601-1 Medical Electrical Equipment Safety at Thermal LimitsIEC 60601-1 Thermal Safety RequirementsIEC 60601-1-11 Environmental Conditions for Medical Electrical EquipmentIEC 60601-1-11 Thermal Performance in Home Healthcare DevicesIEC 60601-1-2 Electromagnetic and Thermal ImmunityIEC 60601-1-8 Temperature Alarm SystemsIEC 60601-2-4 Temperature Limits for DefibrillatorsIEC 60749-23 Thermal Shock for Semiconductor DevicesISO 10993-1 Biological Evaluation Considering Thermal EffectsISO 10993-10 Sensitization Tests under Thermal ExposureISO 10993-10 Thermal Sensitization TestingISO 10993-11 Evaluation of Thermal Effects on Medical DevicesISO 10993-12 Sample Preparation with Thermal ConsiderationsISO 10993-18 Chemical Characterization Considering Thermal ExposureISO 10993-4 Hemocompatibility Testing under Thermal StressISO 10993-5 Cytotoxicity Testing after Thermal ExposureISO 11135 Thermal Effects in Ethylene Oxide SterilizationISO 11135 Thermal Process Validation for EO SterilizationISO 11135-1 EO Gas Thermal Process MonitoringISO 11137-2 Thermal Validation of Sterilization CyclesISO 11137-3 Radiation Sterilization and Thermal EffectsISO 11607 Packaging Performance under Thermal StressISO 11607-2 Packaging System Validation under Thermal StressISO 13485 Quality Management Including Thermal ControlsISO 13485 Thermal Control in Manufacturing ProcessesISO 13485 Thermal Management in Medical Device ManufacturingISO 13485-1 Quality Systems and Thermal ControlsISO 13943 Fire Safety and Thermal Risk in DevicesISO 14644-1 Cleanroom Environmental MonitoringISO 14644-2 Thermal Stability in CleanroomsISO 14644-3 Cleanroom Testing and Thermal ConditionsISO 14644-4 Monitoring Thermal Conditions in CleanroomsISO 14698-1 Biocontamination Control Under Thermal ConditionsISO 14937 Thermal Process ValidationISO 14937 Thermal Validation of Sterilization ProcessesISO 14971 Risk Management for Thermal HazardsISO 14971 Thermal Risk ManagementISO 16750 Environmental Testing for Automotive Electrical EquipmentISO 16750 Environmental Tests Including Thermal CyclingISO 16750-4 Electrical Equipment Environmental Thermal TestingISO 16750-4 Environmental Testing for Electrical EquipmentISO 21789 Environmental Stress Testing for Medical Devices

ASTM D618 Conditioning of Plastics under Thermal Exposure: Eurolabs Laboratory Testing Service

ASTM D618 Conditioning of Plastics under Thermal Exposure is a widely recognized standard for laboratory testing, governing the thermal conditioning of plastics. This standard provides guidelines for evaluating the effects of temperature and humidity on plastic materials.

International and National Standards

The following standards apply to ASTM D618 Conditioning of Plastics under Thermal Exposure:

  • ISO 489:2006 - Plastics - Determination of the effect of temperature on the properties of plastics

  • ASTM D618 - Conditioning of Plastics under Thermal Exposure

  • EN ISO 306:2015 - Plastics - Thermoplastics materials - Determination of the effect of temperatures on the properties of plastics

  • TSE ISO 489:2006 (Turkish Standard)

    • Standard Development Organizations

    The American Society for Testing and Materials (ASTM) is a leading standard development organization, responsible for developing and maintaining standards related to ASTM D618 Conditioning of Plastics under Thermal Exposure. Other organizations involved in standard development include the International Organization for Standardization (ISO), the European Committee for Standardization (CEN), and the Turkish Standards Institution (TSE).

    Standard Evolution and Updates

    Standards evolve and get updated regularly to reflect changes in technology, materials, and testing methods. Eurolab closely monitors standard updates and ensures that its testing services comply with the latest requirements.

    Industry-Specific Compliance Requirements

    Various industries have specific compliance requirements for ASTM D618 Conditioning of Plastics under Thermal Exposure:

  • Medical devices: EU MDR 2017/745

  • Aerospace: FAA (Federal Aviation Administration)

  • Automotive: ISO/TS 16949:2009

    • Standard-Related Information Conclusion

    ASTM D618 Conditioning of Plastics under Thermal Exposure is a critical standard for evaluating the thermal conditioning of plastics. Eurolabs laboratory testing service adheres to these standards, ensuring accurate and reliable results.

    ---

    Why This Test Is Needed and Required

    ASTM D618 Conditioning of Plastics under Thermal Exposure testing is essential for various industries:

  • Ensuring product safety and reliability

  • Complying with regulatory requirements

  • Improving product performance and lifespan

  • Enhancing competitiveness through quality assurance and compliance benefits

    • Business and Technical Reasons for Conducting This Test

    The business and technical reasons for conducting ASTM D618 Conditioning of Plastics under Thermal Exposure testing include:

  • Ensuring product safety and reliability

  • Complying with regulatory requirements

  • Improving product performance and lifespan

  • Enhancing competitiveness through quality assurance and compliance benefits

    • Consequences of Not Performing This Test

    Not performing this test can lead to:

  • Product failure and recalls

  • Regulatory non-compliance and fines

  • Loss of customer trust and reputation damage

    • ---

    Detailed Step-by-Step Explanation of How the Test Is Conducted

    1. Sample preparation: Samples are prepared according to ASTM D618 guidelines.

    2. Temperature conditioning: The samples are subjected to thermal conditioning at a specified temperature for a set period.

    3. Measurement and analysis: The properties of the plastic material are measured and analyzed after thermal conditioning.

    Testing Equipment and Instruments Used

    Eurolab uses state-of-the-art equipment, including:

  • Thermal conditioning chambers

  • Thermometers

  • Humidity controllers

  • Data acquisition systems

    • Testing Environment Requirements

    The testing environment must meet specific requirements:

  • Temperature range: 23C to 150C

  • Relative humidity: 30 to 80

  • Pressure: 1 atm

    • Sample Preparation Procedures

    Samples are prepared according to ASTM D618 guidelines.

    Testing Parameters and Conditions

    The following parameters are tested under thermal conditioning:

  • Tensile strength

  • Flexural strength

  • Impact resistance

  • Thermal stability

    • ---

    How Test Results Are Documented and Reported

    Eurolab provides detailed test reports, including:

  • Sample identification and description

  • Testing conditions and parameters

  • Test results and analysis

  • Conclusion and recommendations

    • Report Format and Structure

    Reports are structured according to ASTM D618 guidelines.

    ---

    Benefits and Advantages of Performing This Test

    Performing ASTM D618 Conditioning of Plastics under Thermal Exposure testing offers numerous benefits:

  • Ensuring product safety and reliability

  • Complying with regulatory requirements

  • Improving product performance and lifespan

  • Enhancing competitiveness through quality assurance and compliance benefits

    • Risk Assessment and Mitigation Through Testing

    Testing mitigates risks associated with thermal conditioning, ensuring product safety and reliability.

    ---

    Eurolabs Expertise and Experience in This Field

    Eurolab has extensive experience in conducting ASTM D618 Conditioning of Plastics under Thermal Exposure testing:

  • State-of-the-art equipment

  • Highly trained personnel

  • Compliance with international standards

    • ---

    Conclusion

    ASTM D618 Conditioning of Plastics under Thermal Exposure is a critical standard for evaluating the thermal conditioning of plastics. Eurolabs laboratory testing service adheres to these standards, ensuring accurate and reliable results.

    ---

    This comprehensive guide provides an overview of ASTM D618 Conditioning of Plastics under Thermal Exposure, including standard-related information, standard requirements and needs, test conditions and methodology, test reporting and documentation, and why this test should be performed. Eurolabs expertise and experience in this field ensure that our laboratory testing service meets the highest standards.

    ---

    Appendix

  • ASTM D618: Conditioning of Plastics under Thermal Exposure

  • ISO 489:2006 - Plastics - Determination of the effect of temperature on the properties of plastics

  • EN ISO 306:2015 - Plastics - Thermoplastics materials - Determination of the effect of temperatures on the properties of plastics

  • TSE ISO 489:2006 (Turkish Standard)

    • References

  • ASTM D618: Conditioning of Plastics under Thermal Exposure

  • ISO 489:2006 - Plastics - Determination of the effect of temperature on the properties of plastics

  • EN ISO 306:2015 - Plastics - Thermoplastics materials - Determination of the effect of temperatures on the properties of plastics

    • Disclaimer

    Eurolabs laboratory testing service is subject to change based on updates in standards and regulations. Please contact Eurolab for the latest information.

    ---

    This guide provides a comprehensive overview of ASTM D618 Conditioning of Plastics under Thermal Exposure, including standard-related information, standard requirements and needs, test conditions and methodology, test reporting and documentation, and why this test should be performed.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers