EUROLAB
iec-60068-2-78-damp-heat-steady-state
Thermal Resistance and Environmental Testing ASTM D1500 Heat Aging of Insulating MaterialsASTM D1929 Thermal Ignition of PolymersASTM D2240 Hardness Testing After Thermal ExposureASTM D2765 Thermal Stability of PolymersASTM D3039 Thermal Fatigue Testing of CompositesASTM D3045 Thermal Aging of PlasticsASTM D3895 Oxygen Index and Thermal StabilityASTM D3895 Thermal Degradation of PolymersASTM D4065 Dynamic Mechanical Thermal AnalysisASTM D412 Thermal Aging of ElastomersASTM D573 Heat Resistance of RubberASTM D618 Conditioning for Thermal AnalysisASTM D618 Conditioning of Plastics under Thermal ExposureASTM D648 Heat Deflection Temperature TestingASTM D648 Heat Deflection Testing of PlasticsASTM D695 Compressive Strength After Thermal ExposureASTM D746 Brittleness Temperature TestingASTM D785 Thermal Deformation TestingASTM D7945 Thermal Stability of CompositesASTM E595 Thermal Emission TestingASTM F1278 Thermal Cycling of Medical PolymersASTM F1576 Thermal Conductivity TestingASTM F1980 Accelerated Aging of Sterilized Medical DevicesASTM F1980 Accelerated Thermal Aging of Medical DevicesASTM F1981 Thermal Compatibility of Medical AdhesivesASTM F1983 Thermal Compatibility of MaterialsASTM F1984 Thermal Cycling of Sterilized ProductsASTM F2009 Thermomechanical Testing of DevicesASTM F2461 Thermal Performance of Medical Device CoatingsASTM F2477 Thermal Aging of Silicone ElastomersASTM F2516 Thermal Conductivity of Medical Device MaterialsASTM F2621 Thermal Expansion TestingASTM F3001 Thermal Endurance of ImplantsASTM F392 Thermal Resistance of Medical TubingIEC 60068-2-1 Cold Temperature TestingIEC 60068-2-11 Salt Fog with Thermal ExposureIEC 60068-2-14 Rapid Thermal Shock TestingIEC 60068-2-14 Thermal Shock Test MethodIEC 60068-2-14 Thermal Shock TestingIEC 60068-2-2 Dry Heat TestIEC 60068-2-20 Low Temperature and Thermal CyclingIEC 60068-2-30 Damp Heat, Cyclic (12+12 hour)IEC 60068-2-38 Dry Heat, Steady StateIEC 60068-2-4 Rapid Change of TemperatureIEC 60068-2-5 Combined Environmental Testing Including ThermalIEC 60529 Environmental Protection Ratings and Thermal ImpactIEC 60529 Protection Against Environmental Thermal ConditionsIEC 60529 Protection Degree and Thermal ImpactIEC 60601-1 Medical Electrical Equipment Safety at Thermal LimitsIEC 60601-1 Thermal Safety RequirementsIEC 60601-1-11 Environmental Conditions for Medical Electrical EquipmentIEC 60601-1-11 Thermal Performance in Home Healthcare DevicesIEC 60601-1-2 Electromagnetic and Thermal ImmunityIEC 60601-1-8 Temperature Alarm SystemsIEC 60601-2-4 Temperature Limits for DefibrillatorsIEC 60749-23 Thermal Shock for Semiconductor DevicesISO 10993-1 Biological Evaluation Considering Thermal EffectsISO 10993-10 Sensitization Tests under Thermal ExposureISO 10993-10 Thermal Sensitization TestingISO 10993-11 Evaluation of Thermal Effects on Medical DevicesISO 10993-12 Sample Preparation with Thermal ConsiderationsISO 10993-18 Chemical Characterization Considering Thermal ExposureISO 10993-4 Hemocompatibility Testing under Thermal StressISO 10993-5 Cytotoxicity Testing after Thermal ExposureISO 11135 Thermal Effects in Ethylene Oxide SterilizationISO 11135 Thermal Process Validation for EO SterilizationISO 11135-1 EO Gas Thermal Process MonitoringISO 11137-2 Thermal Validation of Sterilization CyclesISO 11137-3 Radiation Sterilization and Thermal EffectsISO 11607 Packaging Performance under Thermal StressISO 11607-2 Packaging System Validation under Thermal StressISO 13485 Quality Management Including Thermal ControlsISO 13485 Thermal Control in Manufacturing ProcessesISO 13485 Thermal Management in Medical Device ManufacturingISO 13485-1 Quality Systems and Thermal ControlsISO 13943 Fire Safety and Thermal Risk in DevicesISO 14644-1 Cleanroom Environmental MonitoringISO 14644-2 Thermal Stability in CleanroomsISO 14644-3 Cleanroom Testing and Thermal ConditionsISO 14644-4 Monitoring Thermal Conditions in CleanroomsISO 14698-1 Biocontamination Control Under Thermal ConditionsISO 14937 Thermal Process ValidationISO 14937 Thermal Validation of Sterilization ProcessesISO 14971 Risk Management for Thermal HazardsISO 14971 Thermal Risk ManagementISO 16750 Environmental Testing for Automotive Electrical EquipmentISO 16750 Environmental Tests Including Thermal CyclingISO 16750-4 Electrical Equipment Environmental Thermal TestingISO 16750-4 Environmental Testing for Electrical EquipmentISO 21789 Environmental Stress Testing for Medical Devices

IEC 60068-2-78 Damp Heat, Steady State Laboratory Testing Service: A Comprehensive Guide

Standard-Related Information

The IEC 60068-2-78 standard is part of the IEC 60068 series, which specifies methods for testing and evaluating the resistance to various environmental conditions. The IEC 60068-2-78 standard specifically addresses the damp heat, steady state test method.

Introduction

IEC 60068-2-78 is a widely recognized and adopted international standard that outlines the requirements for testing electrical and electronic products against the effects of high humidity and temperature. This standard is essential for ensuring product reliability, safety, and performance in various environments.

Legal and Regulatory Framework

The IEC 60068-2-78 standard is governed by several regulatory bodies worldwide, including:

  • International Electrotechnical Commission (IEC)

  • European Committee for Electrotechnical Standardization (CENELEC)

  • Turkish Standards Institution (TSE)

    • Compliance with this standard is mandatory in many countries and industries, such as:

  • Aerospace

  • Automotive

  • Medical devices

  • Electronics

    • Standard Development Organizations

    The IEC 60068-2-78 standard is developed by the Technical Committee 61 of the International Electrotechnical Commission (IEC). This committee consists of experts from various countries and industries who work together to maintain and update the standard.

    International and National Standards

    IEC 60068-2-78 is an international standard that has been adopted as a national standard in many countries. Some examples include:

  • ISO/TS 16949 (Automotive)

  • EN 60721 (Electronics)

  • ASTM B899 (Aerospace)

    • Standard Compliance Requirements

    Compliance with IEC 60068-2-78 requires that products undergo testing to ensure they meet the specified requirements for damp heat, steady state. This includes:

  • Temperature and humidity control

  • Sample preparation and conditioning

  • Testing equipment and instruments

  • Data analysis and reporting

    • Test Conditions and Methodology

    The IEC 60068-2-78 standard outlines specific test conditions and methodologies to evaluate product performance under high humidity and temperature conditions.

    1. Temperature and Humidity Control: The testing environment must be controlled within 0.5C of the specified temperature and 3 relative humidity.

    2. Sample Preparation and Conditioning: Samples must be conditioned according to the standard, which includes cleaning, drying, and packaging.

    3. Testing Equipment and Instruments: Specialized equipment, such as climate chambers and thermocouples, is used to control and measure temperature and humidity levels.

    4. Data Analysis and Reporting: Test results are analyzed and reported in accordance with the standard.

    Test Reporting and Documentation

    IEC 60068-2-78 requires that test reports include:

  • A clear description of the testing environment

  • Sample preparation and conditioning procedures

  • Testing equipment and instruments used

  • Data analysis and reporting methods

    • Why This Test Should Be Performed

    Performing IEC 60068-2-78 damp heat, steady state testing is crucial for ensuring product reliability, safety, and performance in various environments. This test helps to:

  • Identify potential failures and defects

  • Assess product durability and lifespan

  • Evaluate product quality and performance

  • Meet regulatory requirements and standards

    • Why Eurolab Should Provide This Service

    Eurolab is a leading provider of laboratory testing services, including IEC 60068-2-78 damp heat, steady state testing. Our expertise and experience in this field include:

  • State-of-the-art equipment and facilities

  • Qualified and certified personnel

  • Accreditation and certification from recognized organizations

    • Additional Requirements

  • Industry-Specific Examples: Aerospace, automotive, medical devices, electronics

  • Statistical Data and Research Findings: IEC 60068-2-78 compliance rates, test failure rates, product reliability analysis

  • Customer Testimonials and Success Stories: Real-life examples of companies that have benefited from our services

    • Conclusion

    IEC 60068-2-78 damp heat, steady state testing is a critical requirement for ensuring product reliability, safety, and performance in various environments. Eurolabs expertise and experience make us the ideal choice for providing this service. Contact us today to learn more about our laboratory testing services.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers