EUROLAB
iec-60068-2-14-thermal-shock-test-method
Thermal Resistance and Environmental Testing ASTM D1500 Heat Aging of Insulating MaterialsASTM D1929 Thermal Ignition of PolymersASTM D2240 Hardness Testing After Thermal ExposureASTM D2765 Thermal Stability of PolymersASTM D3039 Thermal Fatigue Testing of CompositesASTM D3045 Thermal Aging of PlasticsASTM D3895 Oxygen Index and Thermal StabilityASTM D3895 Thermal Degradation of PolymersASTM D4065 Dynamic Mechanical Thermal AnalysisASTM D412 Thermal Aging of ElastomersASTM D573 Heat Resistance of RubberASTM D618 Conditioning for Thermal AnalysisASTM D618 Conditioning of Plastics under Thermal ExposureASTM D648 Heat Deflection Temperature TestingASTM D648 Heat Deflection Testing of PlasticsASTM D695 Compressive Strength After Thermal ExposureASTM D746 Brittleness Temperature TestingASTM D785 Thermal Deformation TestingASTM D7945 Thermal Stability of CompositesASTM E595 Thermal Emission TestingASTM F1278 Thermal Cycling of Medical PolymersASTM F1576 Thermal Conductivity TestingASTM F1980 Accelerated Aging of Sterilized Medical DevicesASTM F1980 Accelerated Thermal Aging of Medical DevicesASTM F1981 Thermal Compatibility of Medical AdhesivesASTM F1983 Thermal Compatibility of MaterialsASTM F1984 Thermal Cycling of Sterilized ProductsASTM F2009 Thermomechanical Testing of DevicesASTM F2461 Thermal Performance of Medical Device CoatingsASTM F2477 Thermal Aging of Silicone ElastomersASTM F2516 Thermal Conductivity of Medical Device MaterialsASTM F2621 Thermal Expansion TestingASTM F3001 Thermal Endurance of ImplantsASTM F392 Thermal Resistance of Medical TubingIEC 60068-2-1 Cold Temperature TestingIEC 60068-2-11 Salt Fog with Thermal ExposureIEC 60068-2-14 Rapid Thermal Shock TestingIEC 60068-2-14 Thermal Shock TestingIEC 60068-2-2 Dry Heat TestIEC 60068-2-20 Low Temperature and Thermal CyclingIEC 60068-2-30 Damp Heat, Cyclic (12+12 hour)IEC 60068-2-38 Dry Heat, Steady StateIEC 60068-2-4 Rapid Change of TemperatureIEC 60068-2-5 Combined Environmental Testing Including ThermalIEC 60068-2-78 Damp Heat, Steady StateIEC 60529 Environmental Protection Ratings and Thermal ImpactIEC 60529 Protection Against Environmental Thermal ConditionsIEC 60529 Protection Degree and Thermal ImpactIEC 60601-1 Medical Electrical Equipment Safety at Thermal LimitsIEC 60601-1 Thermal Safety RequirementsIEC 60601-1-11 Environmental Conditions for Medical Electrical EquipmentIEC 60601-1-11 Thermal Performance in Home Healthcare DevicesIEC 60601-1-2 Electromagnetic and Thermal ImmunityIEC 60601-1-8 Temperature Alarm SystemsIEC 60601-2-4 Temperature Limits for DefibrillatorsIEC 60749-23 Thermal Shock for Semiconductor DevicesISO 10993-1 Biological Evaluation Considering Thermal EffectsISO 10993-10 Sensitization Tests under Thermal ExposureISO 10993-10 Thermal Sensitization TestingISO 10993-11 Evaluation of Thermal Effects on Medical DevicesISO 10993-12 Sample Preparation with Thermal ConsiderationsISO 10993-18 Chemical Characterization Considering Thermal ExposureISO 10993-4 Hemocompatibility Testing under Thermal StressISO 10993-5 Cytotoxicity Testing after Thermal ExposureISO 11135 Thermal Effects in Ethylene Oxide SterilizationISO 11135 Thermal Process Validation for EO SterilizationISO 11135-1 EO Gas Thermal Process MonitoringISO 11137-2 Thermal Validation of Sterilization CyclesISO 11137-3 Radiation Sterilization and Thermal EffectsISO 11607 Packaging Performance under Thermal StressISO 11607-2 Packaging System Validation under Thermal StressISO 13485 Quality Management Including Thermal ControlsISO 13485 Thermal Control in Manufacturing ProcessesISO 13485 Thermal Management in Medical Device ManufacturingISO 13485-1 Quality Systems and Thermal ControlsISO 13943 Fire Safety and Thermal Risk in DevicesISO 14644-1 Cleanroom Environmental MonitoringISO 14644-2 Thermal Stability in CleanroomsISO 14644-3 Cleanroom Testing and Thermal ConditionsISO 14644-4 Monitoring Thermal Conditions in CleanroomsISO 14698-1 Biocontamination Control Under Thermal ConditionsISO 14937 Thermal Process ValidationISO 14937 Thermal Validation of Sterilization ProcessesISO 14971 Risk Management for Thermal HazardsISO 14971 Thermal Risk ManagementISO 16750 Environmental Testing for Automotive Electrical EquipmentISO 16750 Environmental Tests Including Thermal CyclingISO 16750-4 Electrical Equipment Environmental Thermal TestingISO 16750-4 Environmental Testing for Electrical EquipmentISO 21789 Environmental Stress Testing for Medical Devices

IEC 60068-2-14 Thermal Shock Test Method Laboratory Testing Service Provided by Eurolab

Standard-Related Information

IEC 60068-2-14 is a widely recognized international standard that specifies the thermal shock test method for evaluating the performance of electrical and electronic products under extreme temperature conditions. This standard is part of the IEC 60068 series, which provides guidelines for testing and specifying the environmental requirements for various types of equipment.

Legal and Regulatory Framework

The IEC 60068-2-14 standard is developed by the International Electrotechnical Commission (IEC), a leading international organization responsible for developing standards related to electrical and electronic products. The standard is widely adopted by countries around the world, including Europe, North America, and Asia.

In the European Union, the IEC 60068-2-14 standard is harmonized with the EN 60068-2-14 standard, which provides a common framework for testing thermal shock in electrical and electronic products. The standard is also recognized by various national standards organizations, such as ASTM (American Society for Testing and Materials) in the United States.

International and National Standards

The following international and national standards apply to IEC 60068-2-14 Thermal Shock Test Method testing:

  • IEC 60068-1: Environmental testing Part 1: General requirements

  • IEC 60068-2-14: Environmental testing Part 2-14: Tests Test N: Thermal shock

  • EN 60068-2-14: Environmental testing Part 2-14: Tests Test N: Thermal shock (EU)

  • ASTM B117: Standard Practice for Operating Salt Mist Testing

  • TSE 2008: Turkish Standard for Environmental Testing

    • Standard Development Organizations

    The IEC is the leading international organization responsible for developing standards related to electrical and electronic products. The IEC collaborates with various national standards organizations, such as the International Organization for Standardization (ISO) and ASTM.

    Evolution of Standards

    Standards are constantly evolving to reflect changing technologies and requirements. New versions of standards are published periodically to incorporate new test methods, procedures, or equipment. It is essential to consult the latest version of the standard to ensure compliance with current regulations.

    Standard Numbers and Scope

    The following standard numbers and scope apply to IEC 60068-2-14 Thermal Shock Test Method testing:

  • IEC 60068-1: Environmental testing Part 1: General requirements

    • Covers general requirements for environmental testing, including thermal shock.

  • IEC 60068-2-14: Environmental testing Part 2-14: Tests Test N: Thermal shock

    • Specifies the test method and procedure for evaluating thermal shock.

    Standard Compliance Requirements

    Compliance with IEC 60068-2-14 is mandatory for various industries, including:

  • Electrical and electronic equipment manufacturers

  • Automotive suppliers

  • Aerospace and defense contractors

  • Medical device manufacturers

    • Standard-Related Industries

    The following industries require compliance with IEC 60068-2-14 Thermal Shock Test Method testing:

  • Electrical and electronic equipment (EEE)

  • Automotive electronics

  • Aerospace and defense electronics

  • Medical devices

  • Industrial automation

    • Business and Technical Reasons for Conducting Testing

    Conducting thermal shock testing is essential to ensure that electrical and electronic products can withstand extreme temperature conditions, which can cause damage or failure. The test method evaluates the products performance under accelerated temperature fluctuations, simulating real-world operating conditions.

    Consequences of Not Performing This Test

    Failing to perform thermal shock testing can lead to:

  • Product failures or malfunctions

  • Reduced lifespan and reliability

  • Increased maintenance costs

  • Safety risks for users

    • Industries That Require This Testing

    The following industries require compliance with IEC 60068-2-14 Thermal Shock Test Method testing:

  • Electrical and electronic equipment manufacturers

  • Automotive suppliers

  • Aerospace and defense contractors

  • Medical device manufacturers

  • Industrial automation

    • Risk Factors and Safety Implications

    Thermal shock can cause damage or failure to electrical and electronic products, leading to safety risks for users. Conducting thermal shock testing ensures that products can withstand extreme temperature conditions.

    Quality Assurance and Quality Control Aspects

    Eurolabs quality assurance and quality control measures ensure that thermal shock testing is conducted accurately and reliably:

  • Qualified and certified personnel

  • State-of-the-art equipment and facilities

  • Accreditation and certification details

  • International recognition and partnerships

    • Competitive Advantages of Having This Testing Performed

    Conducting thermal shock testing provides competitive advantages, including:

  • Increased product reliability and lifespan

  • Improved safety and reduced liability risks

  • Compliance with regulatory requirements

  • Enhanced market access and trade facilitation

  • Innovation and research development support

    • Cost-Benefit Analysis of Performing This Test

    The cost-benefit analysis of performing thermal shock testing is positive, considering the benefits of increased product reliability, improved safety, and compliance with regulatory requirements.

    IEC 60068-2-14 Thermal Shock Test Method Laboratory Testing Service Provided by Eurolab

    Eurolab offers a comprehensive laboratory testing service for IEC 60068-2-14 Thermal Shock Test Method testing. Our experienced personnel and state-of-the-art equipment ensure accurate and reliable results, meeting the highest standards of quality.

    Conclusion

    IEC 60068-2-14 Thermal Shock Test Method testing is an essential evaluation procedure for electrical and electronic products. Conducting this test ensures that products can withstand extreme temperature conditions, reducing safety risks and improving product reliability. Eurolabs laboratory testing service provides accurate and reliable results, meeting the highest standards of quality.

    References

  • IEC 60068-1: Environmental testing Part 1: General requirements

  • IEC 60068-2-14: Environmental testing Part 2-14: Tests Test N: Thermal shock

  • EN 60068-2-14: Environmental testing Part 2-14: Tests Test N: Thermal shock (EU)

  • ASTM B117: Standard Practice for Operating Salt Mist Testing

  • TSE 2008: Turkish Standard for Environmental Testing

    • Appendix

    Eurolabs laboratory testing service includes:

  • Qualified and certified personnel

  • State-of-the-art equipment and facilities

  • Accreditation and certification details

  • International recognition and partnerships

    • Please contact Eurolab for more information on our IEC 60068-2-14 Thermal Shock Test Method laboratory testing service.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers