EUROLAB
iec-60068-2-2-dry-heat-test
Thermal Resistance and Environmental Testing ASTM D1500 Heat Aging of Insulating MaterialsASTM D1929 Thermal Ignition of PolymersASTM D2240 Hardness Testing After Thermal ExposureASTM D2765 Thermal Stability of PolymersASTM D3039 Thermal Fatigue Testing of CompositesASTM D3045 Thermal Aging of PlasticsASTM D3895 Oxygen Index and Thermal StabilityASTM D3895 Thermal Degradation of PolymersASTM D4065 Dynamic Mechanical Thermal AnalysisASTM D412 Thermal Aging of ElastomersASTM D573 Heat Resistance of RubberASTM D618 Conditioning for Thermal AnalysisASTM D618 Conditioning of Plastics under Thermal ExposureASTM D648 Heat Deflection Temperature TestingASTM D648 Heat Deflection Testing of PlasticsASTM D695 Compressive Strength After Thermal ExposureASTM D746 Brittleness Temperature TestingASTM D785 Thermal Deformation TestingASTM D7945 Thermal Stability of CompositesASTM E595 Thermal Emission TestingASTM F1278 Thermal Cycling of Medical PolymersASTM F1576 Thermal Conductivity TestingASTM F1980 Accelerated Aging of Sterilized Medical DevicesASTM F1980 Accelerated Thermal Aging of Medical DevicesASTM F1981 Thermal Compatibility of Medical AdhesivesASTM F1983 Thermal Compatibility of MaterialsASTM F1984 Thermal Cycling of Sterilized ProductsASTM F2009 Thermomechanical Testing of DevicesASTM F2461 Thermal Performance of Medical Device CoatingsASTM F2477 Thermal Aging of Silicone ElastomersASTM F2516 Thermal Conductivity of Medical Device MaterialsASTM F2621 Thermal Expansion TestingASTM F3001 Thermal Endurance of ImplantsASTM F392 Thermal Resistance of Medical TubingIEC 60068-2-1 Cold Temperature TestingIEC 60068-2-11 Salt Fog with Thermal ExposureIEC 60068-2-14 Rapid Thermal Shock TestingIEC 60068-2-14 Thermal Shock Test MethodIEC 60068-2-14 Thermal Shock TestingIEC 60068-2-20 Low Temperature and Thermal CyclingIEC 60068-2-30 Damp Heat, Cyclic (12+12 hour)IEC 60068-2-38 Dry Heat, Steady StateIEC 60068-2-4 Rapid Change of TemperatureIEC 60068-2-5 Combined Environmental Testing Including ThermalIEC 60068-2-78 Damp Heat, Steady StateIEC 60529 Environmental Protection Ratings and Thermal ImpactIEC 60529 Protection Against Environmental Thermal ConditionsIEC 60529 Protection Degree and Thermal ImpactIEC 60601-1 Medical Electrical Equipment Safety at Thermal LimitsIEC 60601-1 Thermal Safety RequirementsIEC 60601-1-11 Environmental Conditions for Medical Electrical EquipmentIEC 60601-1-11 Thermal Performance in Home Healthcare DevicesIEC 60601-1-2 Electromagnetic and Thermal ImmunityIEC 60601-1-8 Temperature Alarm SystemsIEC 60601-2-4 Temperature Limits for DefibrillatorsIEC 60749-23 Thermal Shock for Semiconductor DevicesISO 10993-1 Biological Evaluation Considering Thermal EffectsISO 10993-10 Sensitization Tests under Thermal ExposureISO 10993-10 Thermal Sensitization TestingISO 10993-11 Evaluation of Thermal Effects on Medical DevicesISO 10993-12 Sample Preparation with Thermal ConsiderationsISO 10993-18 Chemical Characterization Considering Thermal ExposureISO 10993-4 Hemocompatibility Testing under Thermal StressISO 10993-5 Cytotoxicity Testing after Thermal ExposureISO 11135 Thermal Effects in Ethylene Oxide SterilizationISO 11135 Thermal Process Validation for EO SterilizationISO 11135-1 EO Gas Thermal Process MonitoringISO 11137-2 Thermal Validation of Sterilization CyclesISO 11137-3 Radiation Sterilization and Thermal EffectsISO 11607 Packaging Performance under Thermal StressISO 11607-2 Packaging System Validation under Thermal StressISO 13485 Quality Management Including Thermal ControlsISO 13485 Thermal Control in Manufacturing ProcessesISO 13485 Thermal Management in Medical Device ManufacturingISO 13485-1 Quality Systems and Thermal ControlsISO 13943 Fire Safety and Thermal Risk in DevicesISO 14644-1 Cleanroom Environmental MonitoringISO 14644-2 Thermal Stability in CleanroomsISO 14644-3 Cleanroom Testing and Thermal ConditionsISO 14644-4 Monitoring Thermal Conditions in CleanroomsISO 14698-1 Biocontamination Control Under Thermal ConditionsISO 14937 Thermal Process ValidationISO 14937 Thermal Validation of Sterilization ProcessesISO 14971 Risk Management for Thermal HazardsISO 14971 Thermal Risk ManagementISO 16750 Environmental Testing for Automotive Electrical EquipmentISO 16750 Environmental Tests Including Thermal CyclingISO 16750-4 Electrical Equipment Environmental Thermal TestingISO 16750-4 Environmental Testing for Electrical EquipmentISO 21789 Environmental Stress Testing for Medical Devices

IEC 60068-2-2 Dry Heat Test: Laboratory Testing Services Provided by Eurolab

The IEC 60068-2-2 standard is an internationally recognized testing method for evaluating the performance of electrical and electronic equipment in dry heat conditions. This standard is part of the IEC 60068 series, which covers various environmental testing methods to ensure the reliability and safety of electrical and electronic products.

Legal and Regulatory Framework

The IEC 60068-2-2 standard is developed by the International Electrotechnical Commission (IEC) in cooperation with national electrotechnical committees. The standard is widely adopted by countries worldwide, including the United States, Europe, Japan, China, and India. National standards bodies, such as UL (Underwriters Laboratories), ETL (Intertek), and VDE (Verband Deutscher Elektrotechniker), also reference IEC 60068-2-2 in their testing procedures.

International and National Standards

The following international and national standards apply to the IEC 60068-2-2 Dry Heat Test:

  • IEC 60068-2-2: Environmental testing Part 2-2: Tests Test Mb: Dry heat

  • ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories

  • EN 60068-2-2:1999 Environmental testing Part 2-2: Tests Test Mb: Dry heat (European standard)

  • UL 60950-1:2014 Information technology equipment Safety Part 1: General requirements

    • Standard Development Organizations

    The IEC is the primary developer of international standards for electrical and electronic equipment. Other standard development organizations, such as ASTM International (formerly known as the American Society for Testing and Materials) and JIS (Japanese Industrial Standard), also contribute to the development of standards related to environmental testing.

    Standards Evolution and Updates

    Standards evolve over time to reflect changes in technology, regulatory requirements, or industry practices. The IEC 60068-2-2 standard has undergone several revisions since its initial publication in 1976. The most recent revision was published in 2014.

    Specific Standard Numbers and Scope

    The following table lists specific standard numbers and their scope:

    Standard Number Title Scope

    --- --- ---

    IEC 60068-2-2:2013 Environmental testing Part 2-2: Tests Test Mb: Dry heat Evaluates the performance of electrical and electronic equipment in dry heat conditions

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories Establishes general requirements for laboratory competence, including environmental testing

    EN 60068-2-2:1999 Environmental testing Part 2-2: Tests Test Mb: Dry heat Evaluates the performance of electrical and electronic equipment in dry heat conditions (European standard)

    Standard Compliance Requirements

    Compliance with IEC 60068-2-2 is required for various industries, including:

  • Electronics

  • Electrical appliances

  • Automotive electronics

  • Aerospace industry

  • Medical devices

    • Industry-specific requirements and regulations may also apply.

    Additional Industry-Specific Standards

    The following standards are relevant to specific industries:

  • IEC 60950-1:2014 Information technology equipment Safety Part 1: General requirements (IT equipment)

  • IEC 62368-1:2018 Information technology equipment Safety Part 1: General requirements (IT equipment)

  • EN 60079-0:2012 Explosive atmospheres Part 0: Equipment General requirements (explosive environments)

    • Standard Compliance Requirements for Different Industries

    Compliance with IEC 60068-2-2 is mandatory or recommended in various industries:

    Industry Mandatory/Recommended

    --- ---

    Electronics Mandatory

    Electrical appliances Recommended

    Automotive electronics Mandatory

    Aerospace industry Mandatory

    Medical devices Recommended

    Industry-Specific Examples and Case Studies

  • A leading electronic manufacturer required IEC 60068-2-2 testing for their new product line to ensure compliance with regulatory requirements.

  • An automotive electronics supplier performed IEC 60068-2-2 testing to validate the performance of their components in extreme temperatures.

    • Statistical Data and Research Findings

    According to a study by Frost Sullivan, The global environmental testing market is expected to grow at a CAGR of 5.3 from 2020 to 2025. The same study highlights the importance of IEC 60068-2-2 in ensuring product reliability and safety.

    Conclusion

    IEC 60068-2-2 is an internationally recognized standard for evaluating the performance of electrical and electronic equipment in dry heat conditions. Compliance with this standard is mandatory or recommended in various industries, including electronics, electrical appliances, automotive electronics, aerospace industry, and medical devices. Manufacturers must ensure that their products meet the requirements specified in IEC 60068-2-2 to ensure reliability and safety.

    ---

    IEC 60068-2-2 Dry Heat Test: Laboratory Testing Services Provided by Eurolab

    Laboratory Accreditation

    To ensure the competence of laboratories, the IEC 17025 standard requires accreditation by a recognized national or international accreditation body. Laboratories must demonstrate their ability to perform testing in accordance with IEC standards, including IEC 60068-2-2.

    Laboratory Competence

    Competence refers to the laboratorys ability to consistently produce accurate and reliable test results. Eurolabs laboratory is accredited by the International Accreditation Forum (IAF) and follows the ISO/IEC 17025 standard for testing and calibration laboratories.

    Testing and Calibration Services

    Eurolab offers a range of testing and calibration services, including:

  • IEC 60068-2-2 Dry Heat Test

  • IEC 60950-1:2014 Information technology equipment Safety Part 1: General requirements (IT equipment)

  • ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories

    • Testing Capabilities

    Eurolabs laboratory is equipped with state-of-the-art equipment to perform IEC 60068-2-2 Dry Heat Testing. Our experienced technicians follow a strict quality control process to ensure accurate and reliable test results.

    Calibration Services

    Eurolab also offers calibration services for various types of measurement instruments, including thermometers, hygrometers, and temperature calibrators.

    Certification and Reporting

    After completing the IEC 60068-2-2 Dry Heat Test, Eurolab issues a certificate of conformance, which confirms that the product meets the requirements specified in IEC 60068-2-2. A detailed test report is also provided to the customer.

    Industry-Specific Examples and Case Studies

  • A leading electronics manufacturer required IEC 60068-2-2 testing for their new product line to ensure compliance with regulatory requirements.

  • An automotive electronics supplier performed IEC 60068-2-2 testing to validate the performance of their components in extreme temperatures.

    • Statistical Data and Research Findings

    According to a study by Frost Sullivan, The global environmental testing market is expected to grow at a CAGR of 5.3 from 2020 to 2025. The same study highlights the importance of IEC 60068-2-2 in ensuring product reliability and safety.

    Conclusion

    Eurolabs laboratory is accredited by the International Accreditation Forum (IAF) and follows the ISO/IEC 17025 standard for testing and calibration laboratories. Our experienced technicians follow a strict quality control process to ensure accurate and reliable test results. We offer IEC 60068-2-2 Dry Heat Testing, as well as other testing and calibration services.

    ---

    IEC 60068-2-2 Dry Heat Test: Laboratory Testing Services Provided by Eurolab

    Dry Heat Test Procedure

    The IEC 60068-2-2 standard specifies a dry heat test procedure for evaluating the performance of electrical and electronic equipment in extreme temperatures. The following steps describe the test procedure:

    1. Preparation: Prepare the product according to the manufacturers instructions.

    2. Thermal Conditioning: Condition the product at a temperature of 40C 5 for 16 hours prior to testing.

    3. Dry Heat Test: Place the product in a dry heat chamber and maintain a temperature of 155C 5 for 4 hours.

    4. Monitoring: Monitor the products performance during the test, including temperature, humidity, and electrical parameters.

    Test Equipment

    The following equipment is required to perform the IEC 60068-2-2 Dry Heat Test:

  • Dry heat chamber (capable of maintaining a temperature of 155C 5)

  • Thermometer (accurate to 1C)

  • Hygrometer (accurate to 5)

  • Temperature calibrator

  • Electrical test equipment (e.g., multimeter, oscilloscope)

    • Test Procedure

    The following steps describe the test procedure:

    1. Preparation: Prepare the product according to the manufacturers instructions.

    2. Thermal Conditioning: Condition the product at a temperature of 40C 5 for 16 hours prior to testing.

    3. Dry Heat Test: Place the product in a dry heat chamber and maintain a temperature of 155C 5 for 4 hours.

    4. Monitoring: Monitor the products performance during the test, including temperature, humidity, and electrical parameters.

    Test Data

    The following data is recorded during the test:

  • Temperature (ambient and product)

  • Humidity

  • Electrical parameters (e.g., voltage, current, power factor)

    • Data Analysis

    The data collected during the test is analyzed to determine the products performance in extreme temperatures. The analysis includes:

    1. Temperature Profiling: Plot the temperature profile of the product during the test.

    2. Electrical Performance: Analyze the electrical parameters (e.g., voltage, current, power factor) to ensure they meet the requirements specified in IEC 60068-2-2.

    3. Reliability Analysis: Evaluate the reliability of the product based on the test data.

    Industry-Specific Examples and Case Studies

  • A leading electronics manufacturer required IEC 60068-2-2 testing for their new product line to ensure compliance with regulatory requirements.

  • An automotive electronics supplier performed IEC 60068-2-2 testing to validate the performance of their components in extreme temperatures.

    • Statistical Data and Research Findings

    According to a study by Frost Sullivan, The global environmental testing market is expected to grow at a CAGR of 5.3 from 2020 to 2025. The same study highlights the importance of IEC 60068-2-2 in ensuring product reliability and safety.

    Conclusion

    Eurolabs laboratory is accredited by the International Accreditation Forum (IAF) and follows the ISO/IEC 17025 standard for testing and calibration laboratories. Our experienced technicians follow a strict quality control process to ensure accurate and reliable test results. We offer IEC 60068-2-2 Dry Heat Testing, as well as other testing and calibration services.

    ---

    IEC 60068-2-2 Dry Heat Test: Laboratory Testing Services Provided by Eurolab

    Certificate of Conformance

    After completing the IEC 60068-2-2 Dry Heat Test, Eurolab issues a certificate of conformance, which confirms that the product meets the requirements specified in IEC 60068-2-2. The certificate includes:

    1. Product Information: Details about the product being tested (e.g., manufacturer, model number).

    2. Test Methodology: Description of the test methodology used to perform the dry heat test.

    3. Results: Summary of the results obtained during the test (e.g., temperature, humidity, electrical parameters).

    Detailed Test Report

    Eurolab also provides a detailed test report that includes:

    1. Introduction: Overview of the product being tested and the purpose of the test.

    2. Test Methodology: Description of the test methodology used to perform the dry heat test.

    3. Results: Detailed results obtained during the test (e.g., temperature profile, electrical performance).

    4. Discussion: Analysis of the results and their implications for product reliability.

    Certificate Validity

    The certificate of conformance is valid for a specified period (typically 1-2 years) after the date of issue. During this period, the product meets the requirements specified in IEC 60068-2-2.

    Industry-Specific Examples and Case Studies

  • A leading electronics manufacturer required IEC 60068-2-2 testing for their new product line to ensure compliance with regulatory requirements.

  • An automotive electronics supplier performed IEC 60068-2-2 testing to validate the performance of their components in extreme temperatures.

    • Statistical Data and Research Findings

    According to a study by Frost Sullivan, The global environmental testing market is expected to grow at a CAGR of 5.3 from 2020 to 2025. The same study highlights the importance of IEC 60068-2-2 in ensuring product reliability and safety.

    Conclusion

    Eurolabs laboratory is accredited by the International Accreditation Forum (IAF) and follows the ISO/IEC 17025 standard for testing and calibration laboratories. Our experienced technicians follow a strict quality control process to ensure accurate and reliable test results. We offer IEC 60068-2-2 Dry Heat Testing, as well as other testing and calibration services.

    ---

    IEC 60068-2-2 Dry Heat Test: Laboratory Testing Services Provided by Eurolab

    The IEC 60068-2-2 standard specifies a dry heat test procedure for evaluating the performance of electrical and electronic equipment in extreme temperatures. This comprehensive guide has provided an overview of the standard, laboratory accreditation, testing procedures, certification, and reporting.

    Recommendations

    Based on this guide, we recommend:

    1. IEC 60068-2-2 Testing: Perform IEC 60068-2-2 dry heat testing to ensure product reliability in extreme temperatures.

    2. Laboratory Accreditation: Ensure laboratory accreditation with a reputable accrediting body (e.g., IAF) for testing and calibration services.

    3. Strict Quality Control: Implement strict quality control procedures to ensure accurate and reliable test results.

    Future Research Directions

    1. Development of New Test Methods: Develop new test methods for evaluating product performance in extreme temperatures.

    2. Integration with Other Standards: Integrate IEC 60068-2-2 testing with other standards (e.g., ISO, UL) to ensure comprehensive evaluation of product reliability.

    Conclusion

    In conclusion, this guide has provided a comprehensive overview of the IEC 60068-2-2 standard and laboratory accreditation. We recommend performing IEC 60068-2-2 dry heat testing to ensure product reliability in extreme temperatures and implementing strict quality control procedures to ensure accurate and reliable test results.

    ---

    I hope this helps you! Let me know if you have any other questions or need further assistance.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers