EUROLAB
en-50270-emc-for-alarm-systems
EMC (Electromagnetic Compatibility) Testing ANSI C63.4 Methods of Measurement of Radio-Noise EmissionsCISPR 11 Industrial Equipment EmissionsCISPR 11 Industrial, Scientific and Medical (ISM) Equipment EmissionsCISPR 12 Limits for the Protection of Receivers in the Frequency Range 150 kHz to 108 MHz in VehiclesCISPR 13 Radio Disturbance for Broadcast ReceiversCISPR 14-1 Emission Requirements for Household AppliancesCISPR 14-2 Immunity Requirements for Household AppliancesCISPR 14-3 Emission Testing for Household AppliancesCISPR 15 Limits for Lighting Equipment EmissionsCISPR 15 Limits for Radio Disturbance from Lighting EquipmentCISPR 15 Radio Disturbance from Lighting EquipmentCISPR 16 Measurement Techniques for EMC TestingCISPR 16 Specification for Radio Disturbance and Immunity Measuring ApparatusCISPR 21 Limits for Protection of Receivers in Broadcast BandsCISPR 21 Receiver Protection Against InterferenceCISPR 22 Radiated and Conducted Emission Test for IT EquipmentCISPR 22 Radio Disturbance Characteristics for IT EquipmentCISPR 24 Immunity Requirements for Information Technology EquipmentCISPR 25 Radio Disturbance Characteristics for the Protection of Receivers in VehiclesCISPR 25 Vehicle Components Radio Disturbance TestingCISPR 32 Electromagnetic Compatibility of Multimedia EquipmentCISPR 32 EMC for Multimedia EquipmentCISPR 32 Multimedia Equipment Emission and ImmunityCISPR 34 Emission Requirements for Audio EquipmentEN 50121-1 EMC Requirements for Railway InfrastructureEN 50121-2 Railway EMC for Trackside EquipmentEN 50121-3-2 Railway Applications - EMC of Rolling StockEN 50121-4 EMC of Signalling and Telecommunications EquipmentEN 50130-4 Alarm Systems EMC RequirementsEN 50130-5 Alarm Systems - EMC Requirements for ComponentsEN 50155 Electronic Equipment on Railway Vehicles - EMCEN 50155 Railway Rolling Stock EMC TestingEN 50561-1 EMC Requirements for Power Line Communication EquipmentEN 50581 Compliance Documentation for RoHSEN 50581 Technical Documentation for the Assessment of Electrical and Electronic EquipmentEN 55014-1 Emission Requirements for Household AppliancesEN 55014-1 Household Appliance Emission TestingEN 55014-2 Immunity Requirements for Household AppliancesEN 55015 Limits and Methods of Measurement of Radio Disturbance from Lighting EquipmentEN 55020 Immunity Characteristics for Broadcast ReceiversEN 55022 Class B Emission Compliance TestingEN 55022 Information Technology Equipment - Radio Disturbance CharacteristicsEN 55022 Information Technology Equipment Emission TestingEN 55024 Immunity Requirements for IT EquipmentEN 55024 Information Technology Immunity TestingEN 55025 Vehicle Components EMC RequirementsEN 55025 Vehicle EMC Immunity TestingEN 55032 Emission Requirements for Multimedia EquipmentEN 55032 Emission Requirements for Multimedia EquipmentEN 55035 Immunity Requirements for Multimedia EquipmentEN 55035 Immunity Testing for Multimedia EquipmentEN 55035 Multimedia Equipment Immunity RequirementsEN 61000-3-11 Limitation of Voltage Fluctuations and Flicker in Public Low-Voltage Supply SystemsEN 61000-3-12 Limits for Voltage Changes and Flicker in Public Supply SystemsEN 61000-6-1 Generic Immunity Standard for Residential, Commercial and Light-Industrial EnvironmentsEN 61000-6-2 Generic Immunity Standard for Industrial EnvironmentsEN 61000-6-3 Emission Standard for Residential EnvironmentsEN 61000-6-3 Generic Emission Standard for Residential, Commercial and Light-Industrial EnvironmentsEN 61000-6-4 Generic Emission Standard for Industrial EnvironmentsFCC Part 15 Intentional Radiator TestingFCC Part 15 Radio Frequency Devices Emission TestingFCC Part 15 Subpart B Unintentional Radiator Compliance TestingFCC Part 18 Industrial, Scientific and Medical Equipment EmissionsFCC Part 68 EMC Requirements for Telephone EquipmentIEC 60601-1-2 Medical Electrical Equipment EMC RequirementsIEC 61000-3-2 Harmonic Current Emissions TestIEC 61000-3-3 Voltage Flicker and Flicker Severity TestIEC 61000-4-10 Damped Oscillatory Magnetic Field Immunity TestIEC 61000-4-11 Voltage Dips, Short Interruptions and Voltage Variations TestIEC 61000-4-12 Ring Wave Immunity TestIEC 61000-4-13 Harmonic Current Immunity TestIEC 61000-4-14 Voltage Fluctuations Immunity TestIEC 61000-4-16 Conducted Immunity TestingIEC 61000-4-17 Ripple on DC Input Power Ports Immunity TestIEC 61000-4-18 Burst Immunity Test in Industrial EnvironmentsIEC 61000-4-19 Testing of Power Quality Parameters in TelecommunicationsIEC 61000-4-2 Electrostatic Discharge Immunity TestIEC 61000-4-21 Testing of Power Quality DisturbancesIEC 61000-4-23 Damped Oscillatory Magnetic Field TestIEC 61000-4-24 Testing of DC Input Ports ImmunityIEC 61000-4-25 Voltage Dips, Short Interruptions ImmunityIEC 61000-4-26 Immunity to Voltage FluctuationsIEC 61000-4-27 Conducted Immunity Testing for RailwaysIEC 61000-4-28 Voltage Dips and Interruptions Immunity TestingIEC 61000-4-29 Voltage Dips, Short Interruptions and Voltage Variations ImmunityIEC 61000-4-3 Radiated Radio-Frequency Electromagnetic Field Immunity TestIEC 61000-4-30 Power Quality Measurement MethodsIEC 61000-4-31 Radiated Immunity Test Using Bulk Current InjectionIEC 61000-4-32 Testing of Power Quality ParametersIEC 61000-4-33 Immunity to Conducted Disturbances Induced by Radio-Frequency FieldsIEC 61000-4-34 Damped Oscillatory Transient Immunity TestIEC 61000-4-35 Power Quality Measurement TechniquesIEC 61000-4-36 High Frequency Conducted Disturbances Immunity TestIEC 61000-4-37 Immunity to Voltage Dips and InterruptionsIEC 61000-4-38 Conducted Immunity at Telecom PortsIEC 61000-4-4 Electrical Fast Transient/Burst Immunity TestIEC 61000-4-40 Electrostatic Discharge Immunity for Household AppliancesIEC 61000-4-41 Power Quality Measurement - Harmonics and InterharmonicsIEC 61000-4-42 Immunity to Electromagnetic Disturbances in Power NetworksIEC 61000-4-43 Testing of Conducted EmissionsIEC 61000-4-44 Immunity Tests for RailwaysIEC 61000-4-45 Damped Oscillatory Immunity TestIEC 61000-4-46 Testing Immunity to Conducted DisturbancesIEC 61000-4-47 Immunity to HarmonicsIEC 61000-4-49 Power Quality Harmonics and Interharmonics MeasurementIEC 61000-4-5 Surge Immunity TestIEC 61000-4-50 Testing Immunity to Voltage FluctuationsIEC 61000-4-51 Measurement of Radiated EmissionsIEC 61000-4-52 Bulk Current Injection Test MethodIEC 61000-4-53 Immunity to Conducted Disturbances Induced by Radio-Frequency FieldsIEC 61000-4-54 Power Frequency Magnetic Field ImmunityIEC 61000-4-6 Conducted Radio-Frequency Immunity TestIEC 61000-4-7 Measurement of Power Quality ParametersIEC 61000-4-8 Power Frequency Magnetic Field Immunity TestIEC 61000-4-9 Pulse Magnetic Field Immunity TestIEC 61800-3 EMC Requirements for Adjustable Speed Electrical Power Drive SystemsISO 7637 Road Vehicles Electrical Transient Conduction Along Supply LinesMIL-STD-461 Electromagnetic Interference Requirements for Military Equipment

Comprehensive Guide to EN 50270 EMC for Alarm Systems Laboratory Testing Service

Provided by Eurolab

Standard-Related Information

EN 50270 is a European standard that specifies the requirements for electromagnetic compatibility (EMC) of alarm systems. This standard is part of the IEC 60945 series, which deals with the EMC of electrical equipment in the maritime environment. The standard was first published in 1999 and has undergone several revisions since then.

The EN 50270 standard is based on the IEC 61000-1-2 standard, which provides general guidelines for the electromagnetic compatibility of equipment. The standard specifies the test methods and requirements for measuring the electromagnetic emissions (EME) of alarm systems.

In addition to EN 50270, there are several other standards that govern EMC testing for alarm systems. These include:

  • IEC 60945: Maritime navigation and radiocommunication equipment and systems - General requirements

  • IEC 61000-1-2: Electromagnetic compatibility (EMC) - Part 1-2: Specification for the immunity of mains power circuits against electrostatic discharges

  • EN 55022: Information technology equipment - Radio disturbance characteristics

    • The legal and regulatory framework surrounding EN 50270 EMC testing is governed by various national and international regulations. In the European Union, the EUs Machinery Directive (2006/42/EC) requires that all machinery must be designed and constructed to ensure the safety of users. The directive also specifies that equipment must comply with relevant standards, including EN 50270.

    In the United States, the Federal Communications Commission (FCC) regulates EMC through its Part 15 rules, which specify the requirements for electromagnetic emissions from electronic devices.

    The international standard development organizations involved in the development of EN 50270 include:

  • International Electrotechnical Commission (IEC)

  • European Committee for Electrotechnical Standardization (CENELEC)

    • Standards evolve and get updated through a continuous process involving industry experts, regulatory bodies, and other stakeholders. New standards are developed to address emerging technologies and changing requirements.

    Here is an overview of the standard numbers and their scope:

    Standard Number Title

    --- ---

    EN 50270 Electromagnetic compatibility - Alarm systems - Requirements for electromagnetic immunity (EMI) and emission

    IEC 60945 Maritime navigation and radiocommunication equipment and systems - General requirements

    IEC 61000-1-2 Electromagnetic compatibility (EMC) - Part 1-2: Specification for the immunity of mains power circuits against electrostatic discharges

    Standard compliance is required by various industries, including:

  • Alarm system manufacturers

  • Installation companies

  • System integrators

    • Standard Requirements and Needs

    EN 50270 EMC testing is necessary to ensure that alarm systems do not interfere with other equipment or devices in the vicinity. The test is designed to evaluate the electromagnetic immunity (EMI) of alarm systems, which refers to their ability to withstand external electromagnetic influences.

    The business and technical reasons for conducting EN 50270 EMC testing include:

  • Ensuring compliance with regulatory requirements

  • Preventing interference with other equipment or devices

  • Reducing risk of electromagnetic disturbances

    • Consequences of not performing this test can include:

  • Non-compliance with regulatory requirements

  • Interference with other equipment or devices

  • Electromagnetic disturbances that can cause malfunctions or failures

    • Industries and sectors that require EN 50270 EMC testing include:

  • Alarm system manufacturers

  • Installation companies

  • System integrators

    • Risk factors and safety implications of non-compliance with EN 50270 include:

  • Interference with life-critical systems (e.g. medical equipment)

  • Electromagnetic disturbances that can cause malfunctions or failures

  • Non-compliance with regulatory requirements

    • Quality assurance and quality control aspects are crucial in ensuring the accuracy and reliability of EN 50270 EMC testing.

    Test Conditions and Methodology

    EN 50270 EMC testing involves several steps, including:

    1. Sample preparation: The alarm system is prepared for testing by installing it in a test environment.

    2. Testing equipment: Specialized equipment is used to measure electromagnetic emissions (EME) from the alarm system.

    3. Test conditions: The test is conducted under controlled conditions, with specified temperature and humidity levels.

    4. Measurement and analysis: The EME measurements are analyzed to determine compliance with regulatory requirements.

    The testing environment requires specific conditions, including:

  • Temperature range: 23C 5

  • Humidity level: 50-60

    • Sample preparation procedures include:

    1. Installing the alarm system in a test environment

    2. Ensuring that all connections and interfaces are properly secured

    Testing parameters and conditions include:

    1. Frequency range: 30 Hz - 300 MHz

    2. Power level: up to 3 W/m²

    Measurement and analysis methods involve using specialized equipment, including:

    1. Spectrum analyzers

    2. Signal generators

    Calibration and validation procedures ensure that the testing equipment is accurate and reliable.

    Conclusion

    EN 50270 EMC testing is essential for ensuring compliance with regulatory requirements and preventing interference with other equipment or devices. Eurolab provides expert EN 50270 EMC testing services, ensuring that your alarm systems meet the required standards.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers