EUROLAB
en-iso-19458-sampling-techniques-for-microbiological-water-testing
Water Microbiology Testing ASTM D3941 Anaerobic Bacteria Detection in Well WaterASTM D3975 Detection of Microbial Contamination in Waterborne PaintsASTM D4016 Microbiological Evaluation of Hydrotherapy PoolsASTM D4025 Impact of Disinfectants on Microbial Water QualityASTM D4516 Presumptive Test for Coliforms in WaterASTM D4517 Heterotrophic Bacteria Enumeration by Spread PlateASTM D5127 Microbial Testing of Deionized and Ultrapure WaterASTM D5187 Sulfate-Reducing Bacteria Enumeration in Cooling SystemsASTM D5243 Microbial Corrosion-Related Organisms in PipelinesASTM D5392 Anaerobic Microbial Detection in Drinking WaterASTM D5464 Bacterial Contamination in High-Purity WaterASTM D5465 Fecal Coliform Detection in Natural WatersASTM D5907 Yeast and Mold Count in Bottled Drinking WaterASTM D6189 Rapid Bacteria Detection in Water Using ATP BioluminescenceASTM D6310 Detection of Microbial-Induced Corrosion in WaterASTM D6311 Aerobic Bacteria Testing in Industrial WaterASTM D6451 Testing Microbial Fouling Potential in WaterASTM D6515 Bioindicator Organism Testing in Water QualityASTM D6596 Microbiological Examination of Cooling WaterASTM D7225 Microbial Growth in Building Water SystemsASTM D7503 Legionella Testing in Potable and Process WaterEN 12780 Microbial Load in Industrial Water for Sterile ProcessesEN 14945 Water Quality – Bacteria Detection Using Flow CytometryEN 1500 Hand Hygiene Microbial Evaluation in Water-Related ActivitiesEN ISO 13843 Validation of Microbial Detection Systems for WaterEN ISO 20743 Antimicrobial Activity Testing of Water-Exposed TextilesEN ISO 5667-3 Water Sample Preservation for MicrobiologyEPA 1600 Enterococci Detection Using Membrane FiltrationEPA 1601 Male-Specific Coliphage Testing in WaterEPA 1602 Male-specific Bacteriophage Detection in WaterEPA 1603 E. coli Quantification in Surface WaterEPA 1604 Coliform Bacteria Membrane Filtration TechniqueEPA 1605 Aeromonas Testing in Ground and Surface WaterEPA 1606 Bacteroides qPCR Assay for Source Tracking in WaterEPA 1607 Salmonella Quantification in Contaminated WaterEPA 1610 Norovirus Detection in Drinking Water SamplesEPA 1611 Enterococci Detection Using Quantitative PCREPA 1620 Microbial Water Quality Criteria for Drinking WaterEPA 1621 Rapid Pathogen Detection in Recycled WaterEPA 1622 Cryptosporidium Detection Using Filtration MethodEPA 1623 Giardia and Cryptosporidium Detection in Water SamplesEPA 1624 Enteric Virus Detection in Contaminated WaterEPA 1656 Detection of Protozoan Parasites in WaterEPA 180.1 Turbidity Impact on Microbial Quality AssessmentEPA 200.8 Heavy Metals Impact on Microbiological Water SafetyEPA 524.2 Volatile Microbial Compounds Analysis in Drinking WaterEPA 524.3 Detection of Microbial VOCs in WaterEPA 600 Detection of Opportunistic Pathogens in Building WaterEPA 821-R Pathogen Testing in Treated Industrial WastewaterEPA 9060 Total Organic Carbon Impact on Microbial Water QualityEPA 9065 Pathogen Recovery from Water FiltersEPA 9132 Fecal Indicator Bacteria in Wastewater EffluentsEPA 9215 Total Bacterial Count Using Plate Count MethodISO 10523 Microbial Effects on pH in Water Quality TestingISO 10705-1 Bacteriophage Testing as Viral Indicators in WaterISO 11731 Legionella Testing in Cooling Tower WaterISO 11731-2 Legionella Detection in Biofilm SamplesISO 13136 STEC E. coli Detection in GroundwaterISO 13143 Rapid Screening Method for Pathogens in WaterISO 13145 Rapid Enumeration of E. coli in Fresh WaterISO 13271 Detection of Microsporidia in WaterISO 13799 Detection of Thermophilic Bacteria in Hot Water SystemsISO 13969 Total Coliform Testing in Mineral WaterISO 14189 Detection of Clostridium perfringens in WaterISO 14461 Testing of Spoilage Microorganisms in Bottled WaterISO 14476 Testing of Viral Reduction in Water Disinfection SystemsISO 16266 Pseudomonas aeruginosa Testing in Bottled WaterISO 17381 On-Site Testing of Microbiological Parameters in WaterISO 17994 Comparison Method for Microbial Testing Results in WaterISO 17994 Method Comparison for Drinking Water MicrobiologyISO 17995 Pathogenic Vibrio Detection in Marine and FreshwaterISO 19250 Salmonella Detection in Drinking and Recreational WatersISO 19458 Sampling Strategy for Microbiological Water AnalysisISO 5663 Water Sampling for Microbiological AnalysisISO 6222 Aerobic Colony Count at 22°C and 37°C in WaterISO 6222 Total Viable Bacterial Count in Drinking Water TestingISO 6887-1 Preparation of Water Samples for Microbiological TestingISO 7704 Membrane Filters for Microbiological AnalysisISO 7899-2 Enterococci Detection in Recreational WaterISO 8199 General Guidance for Microbiological Examination of WaterISO 9308-1 E. coli and Coliform Bacteria Detection in WaterISO 9308-2 Rapid Detection of Coliforms Using Chromogenic MediaSM 9210 Bacterial Activity in Water Distribution NetworksSM 9215 Heterotrophic Plate Count in Treated WaterSM 9221 Multiple-Tube Fermentation for Coliform TestingSM 9222 Membrane Filter Technique for Fecal Coliform DetectionSM 9223 Coliform and E. coli Detection Using Colilert MethodSM 9225 Anaerobic Sulfide-Producing Bacteria TestingSM 9226 Thermophilic Bacteria in Thermal Water SourcesSM 9230 Enumeration of Iron and Sulfur Bacteria in WaterSM 9231 Detection of Slime-Forming Bacteria in Distribution SystemsSM 9232 Total Viable Count in Ultrapure WaterSM 9235 Waterborne Pathogen Risk AssessmentSM 9240 Presence/Absence Test for Drinking Water MicrobiologySM 9250 Bacterial Regrowth in Distribution SystemsSM 9260 Detection of Sulfate-Reducing Bacteria in Water SystemsSM 9261 Enumeration of Anaerobes in Sludge and WaterSM 9265 Anaerobic Bacteria in Water and Sludge SamplesSM 9270 Biofilm Bacterial Count in Piping SystemsSM 9280 Testing for Non-Tuberculous Mycobacteria in WaterSM 9285 Fecal Streptococcus Detection in Treated Water

EN ISO 19458 Sampling Techniques for Microbiological Water Testing: Eurolabs Laboratory Testing Service

EN ISO 19458 is an international standard that specifies the sampling techniques for microbiological water testing. This standard is part of a broader family of standards related to water quality and safety, including ISO 5667, ASTM D5905, EN 12999, TSE 569, and others.

Legal and Regulatory Framework

The legal and regulatory framework surrounding EN ISO 19458 is complex and multifaceted. At the international level, the World Health Organization (WHO) has established guidelines for drinking water quality, which include microbiological parameters such as total coliforms, fecal coliforms, and E. coli.

In the European Union, the Water Framework Directive (WFD) sets out a framework for achieving good water status by 2015. The directive includes provisions related to water quality monitoring and sampling techniques.

At the national level, regulations and standards may vary depending on the country. For example, in Turkey, the Turkish Standards Institution (TSE) has published several standards related to water quality, including TS 569, which is based on EN ISO 19458.

Standard Development Organizations

Several organizations are responsible for developing and maintaining standards related to microbiological water testing. These include:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Standardization (CEN)

  • Turkish Standards Institution (TSE)

    • These organizations collaborate on standard development through technical committees, such as ISO/TC 224 (Water quality) and CEN/CLC/TC 13 (Electrical installations in buildings).

    Standard Evolution and Update

    Standards evolve over time to reflect changes in technology, science, and regulation. For example, EN ISO 19458 was first published in 2007 and has undergone several revisions since then.

    The standard development process typically involves a series of steps:

    1. Need identification: A need for a new or revised standard is identified by stakeholders.

    2. Committee formation: A technical committee is formed to develop the standard.

    3. Drafting: The committee drafts the standard based on input from experts and stakeholders.

    4. Voting: Members vote on the draft standard.

    5. Publication: The final standard is published.

    Standard Numbers and Scope

    Here are some relevant standard numbers and their scope:

  • ISO 5667: Water quality -- Sampling

  • EN 12999: Water quality -- Guidance for the selection of sampling points and procedures

  • TSE 569: Turkish Standard for Water Quality Sampling Techniques

    • These standards provide a framework for ensuring that water samples are collected, handled, and analyzed in a way that is consistent with best practices.

    Standard Compliance Requirements

    Different industries have varying requirements for standard compliance. For example:

  • Drinking water utilities must comply with EU regulations and national standards.

  • Food processing plants must follow industry-specific guidelines and regulations related to water quality.

  • Pharmaceutical manufacturers must adhere to GMP (Good Manufacturing Practice) guidelines, which include provisions related to water quality.

    • Standard-Related Information Summary

    In summary, the standard-related information for EN ISO 19458 includes:

  • International standards: ISO 5667, ASTM D5905, EN 12999, TSE 569

  • Legal and regulatory framework: WHO guidelines, EU Water Framework Directive, national regulations

  • Standard development organizations: ISO, ASTM, CEN, TSE

  • Standard evolution and update: revision history, standard development process

    • This section provides a detailed explanation of why EN ISO 19458 is necessary and required.

    Business and Technical Reasons for Conducting EN ISO 19458 Testing

    Several business and technical reasons justify the need for EN ISO 19458 testing:

  • Ensuring water quality: Microbiological contaminants can pose health risks to consumers.

  • Regulatory compliance: Utilities, industries, and government agencies must adhere to regulations and standards related to water quality.

  • Risk assessment and mitigation: Testing helps identify potential risks and mitigate them through corrective actions.

    • Consequences of Not Performing EN ISO 19458 Testing

    Failure to perform EN ISO 19458 testing can result in:

  • Non-compliance with regulations and standards

  • Health risks to consumers

  • Economic losses due to reputation damage, fines, or lawsuits

    • Industries and Sectors That Require EN ISO 19458 Testing

    EN ISO 19458 testing is required in various industries and sectors, including:

  • Drinking water utilities

  • Food processing plants

  • Pharmaceutical manufacturers

  • Healthcare facilities

  • Government agencies

    • Risk Factors and Safety Implications

    The risk factors associated with microbiological contaminants include:

  • Health risks to consumers

  • Economic losses due to reputation damage, fines, or lawsuits

  • Non-compliance with regulations and standards

    • The safety implications of microbiological contaminants are significant, as they can cause illnesses, infections, and even death.

    Standard Requirements and Needs Summary

    In summary, the standard requirements and needs for EN ISO 19458 include:

  • Ensuring water quality: Microbiological contaminants pose health risks to consumers.

  • Regulatory compliance: Utilities, industries, and government agencies must adhere to regulations and standards related to water quality.

  • Risk assessment and mitigation: Testing helps identify potential risks and mitigate them through corrective actions.

    • This section will continue in the next response.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers