EUROLAB
epa-9215-total-bacterial-count-using-plate-count-method
Water Microbiology Testing ASTM D3941 Anaerobic Bacteria Detection in Well WaterASTM D3975 Detection of Microbial Contamination in Waterborne PaintsASTM D4016 Microbiological Evaluation of Hydrotherapy PoolsASTM D4025 Impact of Disinfectants on Microbial Water QualityASTM D4516 Presumptive Test for Coliforms in WaterASTM D4517 Heterotrophic Bacteria Enumeration by Spread PlateASTM D5127 Microbial Testing of Deionized and Ultrapure WaterASTM D5187 Sulfate-Reducing Bacteria Enumeration in Cooling SystemsASTM D5243 Microbial Corrosion-Related Organisms in PipelinesASTM D5392 Anaerobic Microbial Detection in Drinking WaterASTM D5464 Bacterial Contamination in High-Purity WaterASTM D5465 Fecal Coliform Detection in Natural WatersASTM D5907 Yeast and Mold Count in Bottled Drinking WaterASTM D6189 Rapid Bacteria Detection in Water Using ATP BioluminescenceASTM D6310 Detection of Microbial-Induced Corrosion in WaterASTM D6311 Aerobic Bacteria Testing in Industrial WaterASTM D6451 Testing Microbial Fouling Potential in WaterASTM D6515 Bioindicator Organism Testing in Water QualityASTM D6596 Microbiological Examination of Cooling WaterASTM D7225 Microbial Growth in Building Water SystemsASTM D7503 Legionella Testing in Potable and Process WaterEN 12780 Microbial Load in Industrial Water for Sterile ProcessesEN 14945 Water Quality – Bacteria Detection Using Flow CytometryEN 1500 Hand Hygiene Microbial Evaluation in Water-Related ActivitiesEN ISO 13843 Validation of Microbial Detection Systems for WaterEN ISO 19458 Sampling Techniques for Microbiological Water TestingEN ISO 20743 Antimicrobial Activity Testing of Water-Exposed TextilesEN ISO 5667-3 Water Sample Preservation for MicrobiologyEPA 1600 Enterococci Detection Using Membrane FiltrationEPA 1601 Male-Specific Coliphage Testing in WaterEPA 1602 Male-specific Bacteriophage Detection in WaterEPA 1603 E. coli Quantification in Surface WaterEPA 1604 Coliform Bacteria Membrane Filtration TechniqueEPA 1605 Aeromonas Testing in Ground and Surface WaterEPA 1606 Bacteroides qPCR Assay for Source Tracking in WaterEPA 1607 Salmonella Quantification in Contaminated WaterEPA 1610 Norovirus Detection in Drinking Water SamplesEPA 1611 Enterococci Detection Using Quantitative PCREPA 1620 Microbial Water Quality Criteria for Drinking WaterEPA 1621 Rapid Pathogen Detection in Recycled WaterEPA 1622 Cryptosporidium Detection Using Filtration MethodEPA 1623 Giardia and Cryptosporidium Detection in Water SamplesEPA 1624 Enteric Virus Detection in Contaminated WaterEPA 1656 Detection of Protozoan Parasites in WaterEPA 180.1 Turbidity Impact on Microbial Quality AssessmentEPA 200.8 Heavy Metals Impact on Microbiological Water SafetyEPA 524.2 Volatile Microbial Compounds Analysis in Drinking WaterEPA 524.3 Detection of Microbial VOCs in WaterEPA 600 Detection of Opportunistic Pathogens in Building WaterEPA 821-R Pathogen Testing in Treated Industrial WastewaterEPA 9060 Total Organic Carbon Impact on Microbial Water QualityEPA 9065 Pathogen Recovery from Water FiltersEPA 9132 Fecal Indicator Bacteria in Wastewater EffluentsISO 10523 Microbial Effects on pH in Water Quality TestingISO 10705-1 Bacteriophage Testing as Viral Indicators in WaterISO 11731 Legionella Testing in Cooling Tower WaterISO 11731-2 Legionella Detection in Biofilm SamplesISO 13136 STEC E. coli Detection in GroundwaterISO 13143 Rapid Screening Method for Pathogens in WaterISO 13145 Rapid Enumeration of E. coli in Fresh WaterISO 13271 Detection of Microsporidia in WaterISO 13799 Detection of Thermophilic Bacteria in Hot Water SystemsISO 13969 Total Coliform Testing in Mineral WaterISO 14189 Detection of Clostridium perfringens in WaterISO 14461 Testing of Spoilage Microorganisms in Bottled WaterISO 14476 Testing of Viral Reduction in Water Disinfection SystemsISO 16266 Pseudomonas aeruginosa Testing in Bottled WaterISO 17381 On-Site Testing of Microbiological Parameters in WaterISO 17994 Comparison Method for Microbial Testing Results in WaterISO 17994 Method Comparison for Drinking Water MicrobiologyISO 17995 Pathogenic Vibrio Detection in Marine and FreshwaterISO 19250 Salmonella Detection in Drinking and Recreational WatersISO 19458 Sampling Strategy for Microbiological Water AnalysisISO 5663 Water Sampling for Microbiological AnalysisISO 6222 Aerobic Colony Count at 22°C and 37°C in WaterISO 6222 Total Viable Bacterial Count in Drinking Water TestingISO 6887-1 Preparation of Water Samples for Microbiological TestingISO 7704 Membrane Filters for Microbiological AnalysisISO 7899-2 Enterococci Detection in Recreational WaterISO 8199 General Guidance for Microbiological Examination of WaterISO 9308-1 E. coli and Coliform Bacteria Detection in WaterISO 9308-2 Rapid Detection of Coliforms Using Chromogenic MediaSM 9210 Bacterial Activity in Water Distribution NetworksSM 9215 Heterotrophic Plate Count in Treated WaterSM 9221 Multiple-Tube Fermentation for Coliform TestingSM 9222 Membrane Filter Technique for Fecal Coliform DetectionSM 9223 Coliform and E. coli Detection Using Colilert MethodSM 9225 Anaerobic Sulfide-Producing Bacteria TestingSM 9226 Thermophilic Bacteria in Thermal Water SourcesSM 9230 Enumeration of Iron and Sulfur Bacteria in WaterSM 9231 Detection of Slime-Forming Bacteria in Distribution SystemsSM 9232 Total Viable Count in Ultrapure WaterSM 9235 Waterborne Pathogen Risk AssessmentSM 9240 Presence/Absence Test for Drinking Water MicrobiologySM 9250 Bacterial Regrowth in Distribution SystemsSM 9260 Detection of Sulfate-Reducing Bacteria in Water SystemsSM 9261 Enumeration of Anaerobes in Sludge and WaterSM 9265 Anaerobic Bacteria in Water and Sludge SamplesSM 9270 Biofilm Bacterial Count in Piping SystemsSM 9280 Testing for Non-Tuberculous Mycobacteria in WaterSM 9285 Fecal Streptococcus Detection in Treated Water

EPA 9215 Total Bacterial Count Using Plate Count Method Laboratory Testing Service: A Comprehensive Guide

The EPA 9215 Total Bacterial Count Using Plate Count Method laboratory testing service is governed by various international and national standards. These standards ensure the accuracy, precision, and reliability of the test results.

ISO Standards:

  • ISO 6222:2008 specifies the general principles for the enumeration of bacteria in water.

  • ISO 7899-1:1994 describes the plate count method for the determination of total viable counts (TVC) in water.

  • ISO 19458:2010 specifies the requirements for the validation of laboratory methods.

    • ASTM Standards:

  • ASTM D3873-08 (2017)e2 outlines the procedures for evaluating the effectiveness of biocides against bacteria.

  • ASTM E1484-07 describes the requirements for bacterial detection in water.

    • EN and TSE Standards:

  • EN 12904:2005 specifies the methods for determining the number of viable microorganisms in drinking water.

  • TSE 562:2011 outlines the requirements for water quality analysis.

    • Standard Development Organizations:

    The International Organization for Standardization (ISO), American Society for Testing and Materials (ASTM), and European Committee for Standardization (CEN) are prominent standard development organizations. These organizations work together to develop, maintain, and update standards that ensure consistency and accuracy in laboratory testing.

    Evolution of Standards:

    Standards evolve over time as new technologies and methodologies emerge. Standard development organizations continually review and revise existing standards to reflect changes in the industry.

    Specific Standard Numbers and Scope:

  • EPA 9215 Total Bacterial Count Using Plate Count Method

    • Applies to water samples for determining total viable counts (TVC)

    Covers sample preparation, enumeration, and reporting

    Industry-Specific Compliance Requirements:

    Compliance with standards is essential in various industries:

  • Drinking water treatment plants: Ensure safe drinking water quality.

  • Industrial processes: Control bacterial growth and contamination.

  • Pharmaceuticals: Maintain product sterility.

    • The following information provides additional details on standard-related aspects of the EPA 9215 Total Bacterial Count Using Plate Count Method laboratory testing service:

    1. ISO Standards: ISO 6222, ISO 7899-1, and ISO 19458 are relevant to this test.

    These standards ensure accuracy, precision, and reliability in bacterial enumeration.

    2. ASTM Standards: ASTM D3873-08 (2017)e2 and ASTM E1484-07 are applicable.

    These standards specify procedures for evaluating biocides and detecting bacteria.

    3. EN and TSE Standards: EN 12904:2005 and TSE 562:2011 are also relevant.

    These standards outline methods for determining viable microorganisms in drinking water.

    Standard Development Organizations and their Role

    The International Organization for Standardization (ISO), American Society for Testing and Materials (ASTM), and European Committee for Standardization (CEN) are prominent standard development organizations. They collaborate to develop, maintain, and update standards that ensure consistency and accuracy in laboratory testing.

    Evolution of Standards:

    Standards evolve over time as new technologies and methodologies emerge. Standard development organizations continually review and revise existing standards to reflect changes in the industry.

    Specific Standard Numbers and Scope:

  • EPA 9215 Total Bacterial Count Using Plate Count Method

    • Applies to water samples for determining total viable counts (TVC)

    Covers sample preparation, enumeration, and reporting

    Industry-Specific Compliance Requirements:

    Compliance with standards is essential in various industries:

  • Drinking water treatment plants: Ensure safe drinking water quality.

  • Industrial processes: Control bacterial growth and contamination.

  • Pharmaceuticals: Maintain product sterility.

    • ---

    The EPA 9215 Total Bacterial Count Using Plate Count Method laboratory testing service is essential for various reasons:

    Why this Test is Needed and Required

    1. Quality assurance: Ensures accurate results, which is crucial in industries like drinking water treatment.

    2. Product safety: Prevents contamination of products, ensuring consumer safety.

    3. Compliance with regulations: Adheres to standards set by governing bodies.

    Business and Technical Reasons for Conducting EPA 9215

    1. Risk assessment: Identifies potential risks associated with bacterial growth.

    2. Process control: Helps maintain process efficiency and product quality.

    3. Cost savings: Minimizes the risk of recalls, reworks, or other costly issues.

    ---

    The EPA 9215 Total Bacterial Count Using Plate Count Method laboratory testing service involves several steps:

    Step-by-Step Explanation:

    1. Sample collection: Obtain water samples from the treatment process.

    2. Preparation: Transfer the sample to a sterile container and store it at room temperature.

    3. Enumeration: Use a plate count method (ISO 7899-1) to enumerate bacteria in the sample.

    Plate Count Method:

    1. Inoculation: Inoculate a suitable agar medium with the sample.

    2. Incubation: Incubate the plates at a temperature of 20C 2C for 72 hours.

    3. Counting: Count the colonies on each plate.

    Reporting and Interpretation:

    1. Results: Report the total viable counts (TVC) in colony-forming units per milliliter (CFU/mL).

    2. Interpretation: Compare the results with regulatory limits or industry standards.

    ---

    The following information provides additional details on test conditions and methodology for the EPA 9215 Total Bacterial Count Using Plate Count Method laboratory testing service:

    1. Sample Collection:

    Obtain water samples from the treatment process.

    Use sterile containers to prevent contamination.

    2. Preparation:

    Transfer the sample to a sterile container and store it at room temperature (20C 2C).

    Record the sample details, including sampling time and date.

    Enumeration:

    1. Inoculation: Inoculate a suitable agar medium with the sample.

    2. Incubation: Incubate the plates at a temperature of 20C 2C for 72 hours.

    3. Counting: Count the colonies on each plate using a stereomicroscope.

    Reporting and Interpretation:

    1. Results: Report the total viable counts (TVC) in colony-forming units per milliliter (CFU/mL).

    2. Interpretation: Compare the results with regulatory limits or industry standards.

    ---

    Please let me know if you would like me to continue with the rest of the guide.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers