EUROLAB
epa-1664-measurement-of-oil-and-grease-in-water
Potable Water Microbiological & Chemical Analysis APHA 2540 Total Dissolved Solids (TDS) Testing in WaterAPHA 4500-H+ pH Measurement of Drinking WaterAPHA 9221 Multiple-Tube Fermentation Technique for ColiformsASTM D1067 Acidity and Alkalinity Testing in Water SamplesASTM D1125 Electrical Conductivity Measurement of WaterASTM D1126 Standard Test Method for Turbidity of WaterASTM D1253 Residual Chlorine Testing in Water SamplesASTM D1783 Determination of Nitrate in WaterASTM D1946 Gas Chromatography of Volatile Organic Compounds in WaterASTM D2216 Moisture Content of Soil and RockASTM D2974 Moisture, Ash, and Organic Matter of Sludge by Loss on IgnitionASTM D3370 Determination of Total Organic Halogens in WaterASTM D3559 Determination of Total Phosphorus in WaterASTM D3867 Nitrite and Nitrate Analysis in Potable WaterASTM D512 Chloride Concentration Testing in Water SamplesASTM D512 Total Chloride Ion Determination by TitrationASTM D516-89 Determination of Cyanide in WaterASTM D5176 Measurement of Alkalinity in WaterEN 1622 Chlorine Odor and Taste Testing in Drinking WaterEN 26777 Nitrite Content Analysis in Potable WaterEN ISO 10304-1 Ion Chromatography for Anions in Potable WaterEN ISO 10304-3 Determination of Dissolved Anions by Ion ChromatographyEN ISO 10523 pH Measurement of Water QualityEN ISO 11256 Determination of Total Chromium in WaterEN ISO 11369 Cyanide Content Analysis in Water SamplesEN ISO 11732 Ammonium Testing in Drinking Water via FIAEN ISO 11732 Determination of Ammonium in Water by Flow AnalysisEN ISO 11885 Inductively Coupled Plasma for Metal Analysis in WaterEN ISO 11901 Determination of Bromide in Water SamplesEN ISO 11905-1 Nitrogen Analysis via Devarda’s Method in WaterEN ISO 11905-2 Determination of Nitrogen in Water SamplesEN ISO 14403 Determination of Pesticides in Water by GC-MSEN ISO 5663 Guidelines for Sample Preparation of Water TestingEN ISO 5667-1 Guidance on Sampling Water QualityEN ISO 5667-17 Guidance on Sampling for Particles in WaterEN ISO 5667-21 Sampling of Sediments for Chemical AnalysisEN ISO 7027 Turbidity Testing of Drinking Water SamplesEN ISO 7393-1 Chlorine Quantification Using Titrimetry in WaterEN ISO 7393-2 Free and Total Chlorine Analysis in Drinking WaterEN ISO 7887 Color Determination in Potable Water SamplesEN ISO 8466-1 Water Quality – Determination of pHEN ISO 8467 Permanganate Index Testing in Drinking WaterEPA 110.3 Determination of Phenols in WaterEPA 1604 Enterococci Bacteria Detection in Drinking WaterEPA 200.1 Inductively Coupled Plasma-Atomic Emission SpectrometryEPA 200.7 Trace Metal Determination in Drinking Water by ICP-AESEPA 200.8 Trace Elements in Drinking Water Using ICP-MSEPA 200.9 Trace Elements Determination by GFAAS in Drinking WaterEPA 300.0 Inorganic Anions Determination by Ion ChromatographyEPA 300.1 Anions Analysis Including Fluoride and Nitrate in WaterEPA 300.1 Determination of Chloride in Drinking WaterEPA 300.2 Determination of Sulfate in WaterEPA 335.4 Cyanide Measurement in Drinking Water SamplesEPA 350.1 Determination of Chemical Oxygen Demand (COD)EPA 350.2 Measurement of Total Organic Carbon in WaterEPA 353.2 Nitrate-Nitrite Testing in Potable Water SamplesEPA 365.2 Determination of Phenolic Compounds in WaterEPA 410.4 Analysis of Cyanide in Water SamplesEPA 505 Organochlorine Pesticides Analysis in Potable WaterEPA 524.2 Purgeable Organic Compounds Testing in Water SamplesEPA 524.3 VOC Analysis in Potable Water Using GC/MSEPA 524.4 Measurement of Disinfection Byproducts in WaterEPA 531.2 Carbamate Pesticides Detection in Drinking WaterEPA 551.1 Determination of Carbon Tetrachloride in Drinking WaterEPA 552.3 Haloacetic Acids Testing in Potable WaterEPA 600/4-79-020 Colorimetric Analysis of OrthophosphateEPA 600/4-80/014 Chlorophyll-a Determination in WaterEPA 601 Method for Determination of Polychlorinated Biphenyls (PCBs)EPA 608 Pesticides and PCBs Testing in Drinking Water SamplesEPA 608 Pesticides and PCBs Testing in Drinking Water SamplesEPA 625 Methods for Volatile Organic Compounds Analysis in WaterEPA 815-B-17-015 Cryptosporidium and Giardia Detection in WaterEPA 8270 Semi-Volatile Organic Compounds Analysis in WaterEPA 906.0 Determination of Mercury in Water by Cold Vapor Atomic AbsorptionEPA 906.0 Mercury Analysis by Cold Vapor Atomic AbsorptionEPA 906.0 Mercury Determination by CVAASIS 10500 Fluoride Level Compliance Testing in Potable WaterIS 10500 Nitrate Level Analysis in Drinking WaterIS 3025 Part 34 Phenolic Compounds Testing in Potable WaterISO 10530 Measurement of Turbidity in Water SamplesISO 11369 Cyanide Determination in WaterISO 15586 Atomic Absorption for Mercury Detection in WaterISO 15680 VOC Detection by Purge and Trap GC/MS in WaterISO 15681 Determination of Polychlorinated Biphenyls (PCBs) in WaterISO 15705 Determination of Total Organic Carbon in WaterISO 15705 Measurement of Total Organic Carbon (TOC) in WaterISO 16265 Trihalomethane Concentration Testing in Drinking WaterISO 17993 Determination of Mercury in Water by CVAASISO 5667-10 Sampling of WastewatersISO 5667-13 Guidance on Sampling for Cyanobacteria and AlgaeISO 5667-14 Guidance on Sampling for Microorganisms in WaterISO 5667-15 Guidance on Sampling for Metals in WaterISO 5667-18 Guidance on Sampling for Volatile Organic CompoundsISO 5667-19 Guidance on Sampling for Trace ElementsISO 5667-2 Guidance on Sampling StrategiesISO 5667-20 Guidance on Sampling for Microcystins and Other CyanotoxinsISO 5667-3 Sampling Protocols for Microbiological Water TestingISO 5667-4 Guidance on Sampling Preservation and HandlingISO 5667-5 Sampling Strategy for Drinking Water AnalysisISO 5667-6 Water Sampling – Guidance on Sampling TechniquesISO 7028 Sampling of Water for Chemical and Microbiological TestingISO 7887 Water Sample Color Measurement for Quality ControlISO 7888 Electrical Conductivity Testing of Drinking WaterISO 9308-1 E. coli and Coliform Bacteria Testing in Drinking WaterISO 9963-1 Determination of Carbon Dioxide in WaterWHO Guidelines-Based Lead Content Testing in Potable Water

Complete Guide to EPA 1664 Measurement of Oil and Grease in Water Laboratory Testing Service

Provided by Eurolab

The Environmental Protection Agencys (EPA) Method 1664, also known as the Measurement of Oil and Grease in Water, is a widely recognized standard for testing oil and grease levels in water samples. This method is essential for ensuring compliance with environmental regulations, protecting public health, and maintaining ecological balance.

Legal and Regulatory Framework

The EPAs Method 1664 is governed by various international and national standards, including:

  • ISO 15403:2005 - Water quality - Determination of oil and grease

  • ASTM D7572-10 - Standard Test Method for Determining the Effect of Microorganisms on the Acid Number Development of Used Lubricating Oils

  • EN 1484:2011 - Determination of water-extractable oils (WEO) in lubricants

  • TSE 655/3 - Determination of oil and grease in wastewater

    • These standards are developed by standard development organizations such as the International Organization for Standardization (ISO), the American Society for Testing and Materials (ASTM), and the European Committee for Standardization (CEN). The role of these organizations is to ensure that standards evolve and get updated regularly to reflect the latest scientific knowledge, technological advancements, and regulatory requirements.

    International and National Standards

    The following standards are applicable to EPA 1664 Measurement of Oil and Grease in Water testing:

  • ISO 15403:2005 (Water quality - Determination of oil and grease)

  • ASTM D7572-10 (Standard Test Method for Determining the Effect of Microorganisms on the Acid Number Development of Used Lubricating Oils)

  • EN 1484:2011 (Determination of water-extractable oils (WEO) in lubricants)

  • TSE 655/3 (Determination of oil and grease in wastewater)

    • These standards specify the requirements for testing equipment, sample preparation, and measurement procedures. They also provide guidelines for interpreting test results.

    Standard Compliance Requirements

    The following industries require compliance with EPA 1664 Measurement of Oil and Grease in Water testing:

  • Oil and gas industry

  • Petrochemical industry

  • Industrial wastewater treatment plants

  • Municipal wastewater treatment plants

  • Power generation industry

    • Compliance with these standards is essential for ensuring the safety of water resources, protecting public health, and maintaining environmental balance.

    Standard Development Organizations

    The following standard development organizations play a crucial role in developing and updating standards:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Standardization (CEN)

    • These organizations work together to ensure that standards are developed, reviewed, and updated regularly to reflect the latest scientific knowledge and technological advancements.

    Standard Evolution and Updates

    Standards evolve and get updated regularly due to:

  • Advances in technology

  • Changes in regulatory requirements

  • New scientific discoveries

    • This ensures that standards remain relevant and effective in ensuring compliance with environmental regulations and protecting public health.

    Conclusion

    The EPA 1664 Measurement of Oil and Grease in Water testing service is essential for ensuring compliance with environmental regulations, protecting public health, and maintaining ecological balance. This standard is governed by various international and national standards, developed by organizations such as ISO, ASTM, and CEN. Understanding the importance of this standard is crucial for industries that require compliance.

    The EPA 1664 Measurement of Oil and Grease in Water testing service is required due to:

  • Business and Technical Reasons: Industries such as oil and gas, petrochemical, industrial wastewater treatment plants, municipal wastewater treatment plants, and power generation require compliance with this standard.

  • Consequences of Not Performing the Test: Non-compliance can result in environmental damage, public health risks, and regulatory fines.

  • Risk Factors and Safety Implications: Oil and grease levels in water samples can pose significant risks to human health and the environment.

    • Quality Assurance and Quality Control

    The following aspects are essential for ensuring quality assurance and control:

  • Sample preparation and measurement procedures

  • Calibration and validation of testing equipment

  • Data collection and recording procedures

    • Competitive Advantages and Market Positioning

    Performing this test provides significant competitive advantages, including:

  • Compliance with regulatory requirements

  • Protection of public health and environment

  • Increased customer confidence and trust

  • Improved market positioning and reputation

    • Cost Savings and Efficiency Improvements

    Performing this test can result in cost savings and efficiency improvements by:

  • Reducing the risk of environmental damage and regulatory fines

  • Minimizing the need for remediation measures

  • Improving operational efficiency through optimized water treatment processes.

    • Conclusion

    The EPA 1664 Measurement of Oil and Grease in Water testing service is essential for industries that require compliance with this standard. The consequences of not performing the test can result in environmental damage, public health risks, and regulatory fines. Performing this test provides significant competitive advantages, including compliance with regulatory requirements, protection of public health and environment, increased customer confidence and trust, improved market positioning and reputation, cost savings, and efficiency improvements.

    Measurement of Oil and Grease in Water Laboratory Testing Service

    The EPA 1664 Measurement of Oil and Grease in Water testing service is a critical component of environmental monitoring and regulation. This standard is essential for ensuring compliance with environmental regulations, protecting public health, and maintaining ecological balance. The consequences of not performing this test can result in significant risks to human health and the environment.

    Conclusion

    The EPA 1664 Measurement of Oil and Grease in Water testing service is a critical component of environmental monitoring and regulation. This standard is essential for ensuring compliance with environmental regulations, protecting public health, and maintaining ecological balance. Performing this test provides significant competitive advantages, including compliance with regulatory requirements, protection of public health and environment, increased customer confidence and trust, improved market positioning and reputation, cost savings, and efficiency improvements.

    Next Section: Measurement of Oil and Grease in Water Laboratory Testing Service

    Would you like me to proceed with the next section?

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers