EUROLAB
iso-9963-1-determination-of-carbon-dioxide-in-water
Potable Water Microbiological & Chemical Analysis APHA 2540 Total Dissolved Solids (TDS) Testing in WaterAPHA 4500-H+ pH Measurement of Drinking WaterAPHA 9221 Multiple-Tube Fermentation Technique for ColiformsASTM D1067 Acidity and Alkalinity Testing in Water SamplesASTM D1125 Electrical Conductivity Measurement of WaterASTM D1126 Standard Test Method for Turbidity of WaterASTM D1253 Residual Chlorine Testing in Water SamplesASTM D1783 Determination of Nitrate in WaterASTM D1946 Gas Chromatography of Volatile Organic Compounds in WaterASTM D2216 Moisture Content of Soil and RockASTM D2974 Moisture, Ash, and Organic Matter of Sludge by Loss on IgnitionASTM D3370 Determination of Total Organic Halogens in WaterASTM D3559 Determination of Total Phosphorus in WaterASTM D3867 Nitrite and Nitrate Analysis in Potable WaterASTM D512 Chloride Concentration Testing in Water SamplesASTM D512 Total Chloride Ion Determination by TitrationASTM D516-89 Determination of Cyanide in WaterASTM D5176 Measurement of Alkalinity in WaterEN 1622 Chlorine Odor and Taste Testing in Drinking WaterEN 26777 Nitrite Content Analysis in Potable WaterEN ISO 10304-1 Ion Chromatography for Anions in Potable WaterEN ISO 10304-3 Determination of Dissolved Anions by Ion ChromatographyEN ISO 10523 pH Measurement of Water QualityEN ISO 11256 Determination of Total Chromium in WaterEN ISO 11369 Cyanide Content Analysis in Water SamplesEN ISO 11732 Ammonium Testing in Drinking Water via FIAEN ISO 11732 Determination of Ammonium in Water by Flow AnalysisEN ISO 11885 Inductively Coupled Plasma for Metal Analysis in WaterEN ISO 11901 Determination of Bromide in Water SamplesEN ISO 11905-1 Nitrogen Analysis via Devarda’s Method in WaterEN ISO 11905-2 Determination of Nitrogen in Water SamplesEN ISO 14403 Determination of Pesticides in Water by GC-MSEN ISO 5663 Guidelines for Sample Preparation of Water TestingEN ISO 5667-1 Guidance on Sampling Water QualityEN ISO 5667-17 Guidance on Sampling for Particles in WaterEN ISO 5667-21 Sampling of Sediments for Chemical AnalysisEN ISO 7027 Turbidity Testing of Drinking Water SamplesEN ISO 7393-1 Chlorine Quantification Using Titrimetry in WaterEN ISO 7393-2 Free and Total Chlorine Analysis in Drinking WaterEN ISO 7887 Color Determination in Potable Water SamplesEN ISO 8466-1 Water Quality – Determination of pHEN ISO 8467 Permanganate Index Testing in Drinking WaterEPA 110.3 Determination of Phenols in WaterEPA 1604 Enterococci Bacteria Detection in Drinking WaterEPA 1664 Measurement of Oil and Grease in WaterEPA 200.1 Inductively Coupled Plasma-Atomic Emission SpectrometryEPA 200.7 Trace Metal Determination in Drinking Water by ICP-AESEPA 200.8 Trace Elements in Drinking Water Using ICP-MSEPA 200.9 Trace Elements Determination by GFAAS in Drinking WaterEPA 300.0 Inorganic Anions Determination by Ion ChromatographyEPA 300.1 Anions Analysis Including Fluoride and Nitrate in WaterEPA 300.1 Determination of Chloride in Drinking WaterEPA 300.2 Determination of Sulfate in WaterEPA 335.4 Cyanide Measurement in Drinking Water SamplesEPA 350.1 Determination of Chemical Oxygen Demand (COD)EPA 350.2 Measurement of Total Organic Carbon in WaterEPA 353.2 Nitrate-Nitrite Testing in Potable Water SamplesEPA 365.2 Determination of Phenolic Compounds in WaterEPA 410.4 Analysis of Cyanide in Water SamplesEPA 505 Organochlorine Pesticides Analysis in Potable WaterEPA 524.2 Purgeable Organic Compounds Testing in Water SamplesEPA 524.3 VOC Analysis in Potable Water Using GC/MSEPA 524.4 Measurement of Disinfection Byproducts in WaterEPA 531.2 Carbamate Pesticides Detection in Drinking WaterEPA 551.1 Determination of Carbon Tetrachloride in Drinking WaterEPA 552.3 Haloacetic Acids Testing in Potable WaterEPA 600/4-79-020 Colorimetric Analysis of OrthophosphateEPA 600/4-80/014 Chlorophyll-a Determination in WaterEPA 601 Method for Determination of Polychlorinated Biphenyls (PCBs)EPA 608 Pesticides and PCBs Testing in Drinking Water SamplesEPA 608 Pesticides and PCBs Testing in Drinking Water SamplesEPA 625 Methods for Volatile Organic Compounds Analysis in WaterEPA 815-B-17-015 Cryptosporidium and Giardia Detection in WaterEPA 8270 Semi-Volatile Organic Compounds Analysis in WaterEPA 906.0 Determination of Mercury in Water by Cold Vapor Atomic AbsorptionEPA 906.0 Mercury Analysis by Cold Vapor Atomic AbsorptionEPA 906.0 Mercury Determination by CVAASIS 10500 Fluoride Level Compliance Testing in Potable WaterIS 10500 Nitrate Level Analysis in Drinking WaterIS 3025 Part 34 Phenolic Compounds Testing in Potable WaterISO 10530 Measurement of Turbidity in Water SamplesISO 11369 Cyanide Determination in WaterISO 15586 Atomic Absorption for Mercury Detection in WaterISO 15680 VOC Detection by Purge and Trap GC/MS in WaterISO 15681 Determination of Polychlorinated Biphenyls (PCBs) in WaterISO 15705 Determination of Total Organic Carbon in WaterISO 15705 Measurement of Total Organic Carbon (TOC) in WaterISO 16265 Trihalomethane Concentration Testing in Drinking WaterISO 17993 Determination of Mercury in Water by CVAASISO 5667-10 Sampling of WastewatersISO 5667-13 Guidance on Sampling for Cyanobacteria and AlgaeISO 5667-14 Guidance on Sampling for Microorganisms in WaterISO 5667-15 Guidance on Sampling for Metals in WaterISO 5667-18 Guidance on Sampling for Volatile Organic CompoundsISO 5667-19 Guidance on Sampling for Trace ElementsISO 5667-2 Guidance on Sampling StrategiesISO 5667-20 Guidance on Sampling for Microcystins and Other CyanotoxinsISO 5667-3 Sampling Protocols for Microbiological Water TestingISO 5667-4 Guidance on Sampling Preservation and HandlingISO 5667-5 Sampling Strategy for Drinking Water AnalysisISO 5667-6 Water Sampling – Guidance on Sampling TechniquesISO 7028 Sampling of Water for Chemical and Microbiological TestingISO 7887 Water Sample Color Measurement for Quality ControlISO 7888 Electrical Conductivity Testing of Drinking WaterISO 9308-1 E. coli and Coliform Bacteria Testing in Drinking WaterWHO Guidelines-Based Lead Content Testing in Potable Water

ISO 9963-1 Determination of Carbon Dioxide in Water Laboratory Testing Service Provided by Eurolab

Standard-Related Information

The determination of carbon dioxide (CO2) in water is a critical aspect of various industries, including drinking water treatment, wastewater management, and industrial processes. The International Organization for Standardization (ISO) has developed the standard ISO 9963-1:2005(E), which specifies the requirements for determining CO2 in water.

What is ISO 9963-1?

ISO 9963-1 is a widely recognized international standard that outlines the procedures and methods for measuring CO2 in water. The standard is applicable to various types of waters, including drinking water, wastewater, and industrial process waters.

Legal and Regulatory Framework

The legal and regulatory framework surrounding ISO 9963-1 testing is governed by various national and international regulations. For example:

  • In the European Union, the Water Framework Directive (2000/60/EC) requires monitoring of CO2 in drinking water.

  • In the United States, the Environmental Protection Agency (EPA) regulates CO2 emissions from industrial sources under the Clean Air Act.

  • The World Health Organization (WHO) has established guidelines for the quality of drinking water, including limits on CO2 levels.

    • International and National Standards

    ISO 9963-1 is a widely adopted international standard that has been translated into many languages. Other relevant standards include:

  • ASTM D1429-18: Standard Test Method for Determination of Total Carbon Dioxide in Water

  • EN ISO 9963-1:2005: German version of the ISO 9963-1 standard

  • TSE ISO 9963-1:2012: Turkish version of the ISO 9963-1 standard

    • Standard Development Organizations

    The development and maintenance of standards like ISO 9963-1 are overseen by standard development organizations (SDOs). These SDOs include:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • Deutsches Institut für Normung (DIN)

    • Standard Evolution and Updates

    Standards, including ISO 9963-1, are subject to periodic review and revision. This ensures that the standard remains relevant and effective in addressing emerging issues and new technologies.

    Specific Standard Numbers and Scope

    ISO 9963-1 has several specific requirements and parameters, including:

  • Sampling

  • Sample preparation

  • Measurement methods (e.g., titration, gas chromatography)

  • Calibration and validation procedures

    • Standard Compliance Requirements

    Compliance with ISO 9963-1 is required for various industries, including:

  • Drinking water treatment plants

  • Wastewater management facilities

  • Industrial processes involving CO2 emissions

  • Research institutions studying CO2 in water

    • Standard-Related Requirements and Needs

    The standard-related requirements and needs for ISO 9963-1 testing include:

  • Accurate measurement of CO2 levels

  • Compliance with regulatory standards

  • Quality assurance and quality control measures

  • Calibration and validation procedures

  • Data recording and reporting

    • Consequences of Not Performing This Test

    Failure to perform ISO 9963-1 testing can lead to:

  • Non-compliance with regulatory requirements

  • Inaccurate measurement of CO2 levels, potentially leading to incorrect treatment or management decisions

  • Negative impacts on public health and safety

  • Economic losses due to non-compliance or inaccurate measurements

    • Industries Requiring This Testing

    The following industries require ISO 9963-1 testing:

  • Drinking water treatment plants

  • Wastewater management facilities

  • Industrial processes involving CO2 emissions (e.g., power generation, chemical processing)

  • Research institutions studying CO2 in water

    • Risk Factors and Safety Implications

    CO2 levels in water can have significant safety implications, including:

  • Respiratory problems for humans exposed to high CO2 concentrations

  • Equipment corrosion and damage due to high CO2 levels

  • Potential explosions or fires in industrial processes involving CO2 emissions

    • Test Conditions and Methodology

    The test conditions and methodology for ISO 9963-1 include:

  • Sampling procedures (e.g., grab sampling, composite sampling)

  • Sample preparation methods (e.g., filtration, acidification)

  • Measurement methods (e.g., titration, gas chromatography)

  • Calibration and validation procedures

  • Quality control measures

    • Test Reporting and Documentation

    The test reporting and documentation for ISO 9963-1 include:

  • Standardized report format and structure

  • Interpretation of test results

  • Certification and accreditation aspects

  • Traceability and documentation requirements

  • Electronic reporting systems used

    • Why This Test Should Be Performed

    Performing ISO 9963-1 testing provides numerous benefits, including:

  • Accurate measurement of CO2 levels for regulatory compliance

  • Quality assurance and quality control measures to ensure accurate results

  • Calibration and validation procedures to ensure instrument accuracy

  • Data recording and reporting for easy tracking and analysis

    • Why Choose Eurolab for ISO 9963-1 Testing?

    Eurolab offers a range of testing services, including ISO 9963-1 testing. Our experienced team ensures:

  • Accurate measurement of CO2 levels using standardized methods

  • Compliance with regulatory requirements

  • Quality assurance and quality control measures to ensure accurate results

  • Calibration and validation procedures to ensure instrument accuracy

  • Data recording and reporting for easy tracking and analysis

    • By choosing Eurolab for ISO 9963-1 testing, you can be assured of high-quality results that meet the needs of your industry.

    Conclusion

    ISO 9963-1 is a widely recognized international standard for determining CO2 in water. Accurate measurement of CO2 levels is critical for various industries, including drinking water treatment, wastewater management, and industrial processes. Eurolab offers a range of testing services, including ISO 9963-1 testing, ensuring accurate results that meet the needs of your industry.

    References

  • International Organization for Standardization (ISO). (2005). ISO 9963-1:2005(E) - Determination of total carbon dioxide in water.

  • American Society for Testing and Materials (ASTM). (2018). ASTM D1429-18: Standard Test Method for Determination of Total Carbon Dioxide in Water.

  • Deutsches Institut für Normung (DIN). (2012). EN ISO 9963-1:2005 - German version of the ISO 9963-1 standard.

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers