EUROLAB
epa-5511-determination-of-carbon-tetrachloride-in-drinking-water
Potable Water Microbiological & Chemical Analysis APHA 2540 Total Dissolved Solids (TDS) Testing in WaterAPHA 4500-H+ pH Measurement of Drinking WaterAPHA 9221 Multiple-Tube Fermentation Technique for ColiformsASTM D1067 Acidity and Alkalinity Testing in Water SamplesASTM D1125 Electrical Conductivity Measurement of WaterASTM D1126 Standard Test Method for Turbidity of WaterASTM D1253 Residual Chlorine Testing in Water SamplesASTM D1783 Determination of Nitrate in WaterASTM D1946 Gas Chromatography of Volatile Organic Compounds in WaterASTM D2216 Moisture Content of Soil and RockASTM D2974 Moisture, Ash, and Organic Matter of Sludge by Loss on IgnitionASTM D3370 Determination of Total Organic Halogens in WaterASTM D3559 Determination of Total Phosphorus in WaterASTM D3867 Nitrite and Nitrate Analysis in Potable WaterASTM D512 Chloride Concentration Testing in Water SamplesASTM D512 Total Chloride Ion Determination by TitrationASTM D516-89 Determination of Cyanide in WaterASTM D5176 Measurement of Alkalinity in WaterEN 1622 Chlorine Odor and Taste Testing in Drinking WaterEN 26777 Nitrite Content Analysis in Potable WaterEN ISO 10304-1 Ion Chromatography for Anions in Potable WaterEN ISO 10304-3 Determination of Dissolved Anions by Ion ChromatographyEN ISO 10523 pH Measurement of Water QualityEN ISO 11256 Determination of Total Chromium in WaterEN ISO 11369 Cyanide Content Analysis in Water SamplesEN ISO 11732 Ammonium Testing in Drinking Water via FIAEN ISO 11732 Determination of Ammonium in Water by Flow AnalysisEN ISO 11885 Inductively Coupled Plasma for Metal Analysis in WaterEN ISO 11901 Determination of Bromide in Water SamplesEN ISO 11905-1 Nitrogen Analysis via Devarda’s Method in WaterEN ISO 11905-2 Determination of Nitrogen in Water SamplesEN ISO 14403 Determination of Pesticides in Water by GC-MSEN ISO 5663 Guidelines for Sample Preparation of Water TestingEN ISO 5667-1 Guidance on Sampling Water QualityEN ISO 5667-17 Guidance on Sampling for Particles in WaterEN ISO 5667-21 Sampling of Sediments for Chemical AnalysisEN ISO 7027 Turbidity Testing of Drinking Water SamplesEN ISO 7393-1 Chlorine Quantification Using Titrimetry in WaterEN ISO 7393-2 Free and Total Chlorine Analysis in Drinking WaterEN ISO 7887 Color Determination in Potable Water SamplesEN ISO 8466-1 Water Quality – Determination of pHEN ISO 8467 Permanganate Index Testing in Drinking WaterEPA 110.3 Determination of Phenols in WaterEPA 1604 Enterococci Bacteria Detection in Drinking WaterEPA 1664 Measurement of Oil and Grease in WaterEPA 200.1 Inductively Coupled Plasma-Atomic Emission SpectrometryEPA 200.7 Trace Metal Determination in Drinking Water by ICP-AESEPA 200.8 Trace Elements in Drinking Water Using ICP-MSEPA 200.9 Trace Elements Determination by GFAAS in Drinking WaterEPA 300.0 Inorganic Anions Determination by Ion ChromatographyEPA 300.1 Anions Analysis Including Fluoride and Nitrate in WaterEPA 300.1 Determination of Chloride in Drinking WaterEPA 300.2 Determination of Sulfate in WaterEPA 335.4 Cyanide Measurement in Drinking Water SamplesEPA 350.1 Determination of Chemical Oxygen Demand (COD)EPA 350.2 Measurement of Total Organic Carbon in WaterEPA 353.2 Nitrate-Nitrite Testing in Potable Water SamplesEPA 365.2 Determination of Phenolic Compounds in WaterEPA 410.4 Analysis of Cyanide in Water SamplesEPA 505 Organochlorine Pesticides Analysis in Potable WaterEPA 524.2 Purgeable Organic Compounds Testing in Water SamplesEPA 524.3 VOC Analysis in Potable Water Using GC/MSEPA 524.4 Measurement of Disinfection Byproducts in WaterEPA 531.2 Carbamate Pesticides Detection in Drinking WaterEPA 552.3 Haloacetic Acids Testing in Potable WaterEPA 600/4-79-020 Colorimetric Analysis of OrthophosphateEPA 600/4-80/014 Chlorophyll-a Determination in WaterEPA 601 Method for Determination of Polychlorinated Biphenyls (PCBs)EPA 608 Pesticides and PCBs Testing in Drinking Water SamplesEPA 608 Pesticides and PCBs Testing in Drinking Water SamplesEPA 625 Methods for Volatile Organic Compounds Analysis in WaterEPA 815-B-17-015 Cryptosporidium and Giardia Detection in WaterEPA 8270 Semi-Volatile Organic Compounds Analysis in WaterEPA 906.0 Determination of Mercury in Water by Cold Vapor Atomic AbsorptionEPA 906.0 Mercury Analysis by Cold Vapor Atomic AbsorptionEPA 906.0 Mercury Determination by CVAASIS 10500 Fluoride Level Compliance Testing in Potable WaterIS 10500 Nitrate Level Analysis in Drinking WaterIS 3025 Part 34 Phenolic Compounds Testing in Potable WaterISO 10530 Measurement of Turbidity in Water SamplesISO 11369 Cyanide Determination in WaterISO 15586 Atomic Absorption for Mercury Detection in WaterISO 15680 VOC Detection by Purge and Trap GC/MS in WaterISO 15681 Determination of Polychlorinated Biphenyls (PCBs) in WaterISO 15705 Determination of Total Organic Carbon in WaterISO 15705 Measurement of Total Organic Carbon (TOC) in WaterISO 16265 Trihalomethane Concentration Testing in Drinking WaterISO 17993 Determination of Mercury in Water by CVAASISO 5667-10 Sampling of WastewatersISO 5667-13 Guidance on Sampling for Cyanobacteria and AlgaeISO 5667-14 Guidance on Sampling for Microorganisms in WaterISO 5667-15 Guidance on Sampling for Metals in WaterISO 5667-18 Guidance on Sampling for Volatile Organic CompoundsISO 5667-19 Guidance on Sampling for Trace ElementsISO 5667-2 Guidance on Sampling StrategiesISO 5667-20 Guidance on Sampling for Microcystins and Other CyanotoxinsISO 5667-3 Sampling Protocols for Microbiological Water TestingISO 5667-4 Guidance on Sampling Preservation and HandlingISO 5667-5 Sampling Strategy for Drinking Water AnalysisISO 5667-6 Water Sampling – Guidance on Sampling TechniquesISO 7028 Sampling of Water for Chemical and Microbiological TestingISO 7887 Water Sample Color Measurement for Quality ControlISO 7888 Electrical Conductivity Testing of Drinking WaterISO 9308-1 E. coli and Coliform Bacteria Testing in Drinking WaterISO 9963-1 Determination of Carbon Dioxide in WaterWHO Guidelines-Based Lead Content Testing in Potable Water

Comprehensive Guide to EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water Laboratory Testing Service Provided by Eurolab

The determination of carbon tetrachloride in drinking water is a critical aspect of ensuring the safety and quality of potable water supplies. The Environmental Protection Agency (EPA) has established methods for detecting and quantifying various contaminants, including volatile organic compounds (VOCs), in drinking water. One such method is EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water.

Overview of Relevant Standards

The following standards are relevant to the determination of carbon tetrachloride in drinking water:

  • EPA Method 551.1: This is a US Environmental Protection Agency (EPA) method for determining VOCs, including carbon tetrachloride, in drinking water.

  • ISO 14509:2005: This International Organization for Standardization (ISO) standard specifies the requirements for the determination of VOCs in water by gas chromatography.

  • ASTM D5673-04: This American Society for Testing and Materials (ASTM) standard describes a method for determining VOCs, including carbon tetrachloride, in drinking water using gas chromatography.

    • Legal and Regulatory Framework

    The determination of carbon tetrachloride in drinking water is governed by various federal, state, and local regulations. Some key laws and regulations include:

  • Safe Drinking Water Act (SDWA): This US law sets standards for the quality of drinking water and requires public water systems to monitor and report on contaminants, including VOCs.

  • EPA Regulations: The EPA has established maximum contaminant levels (MCLs) for various contaminants, including carbon tetrachloride, in drinking water.

  • State Drinking Water Standards: Many states have adopted or implemented their own standards for drinking water quality, which may be more stringent than federal regulations.

    • Standard Development Organizations and Their Role

    Standard development organizations play a crucial role in establishing and maintaining standards for laboratory testing. Some key organizations include:

  • International Organization for Standardization (ISO): ISO develops and publishes international standards for various industries, including laboratory testing.

  • American Society for Testing and Materials (ASTM): ASTM develops and publishes voluntary consensus standards for various industries, including laboratory testing.

  • US Environmental Protection Agency (EPA): The EPA develops and publishes methods for determining contaminants in drinking water.

    • How Standards Evolve and Get Updated

    Standards evolve and get updated to reflect advances in technology, changes in regulatory requirements, or new scientific findings. Standard development organizations typically follow a formal process for revising standards, which includes:

    1. Proposal: A proposal is submitted to the standard development organization to revise an existing standard.

    2. Drafting: The proposal is reviewed and drafted into a revised standard.

    3. Balloting: The revised standard is balloted among stakeholders, including industry experts, regulatory agencies, and consumers.

    4. Approval: The revised standard is approved by the standard development organization.

    Specific Standard Numbers and Their Scope

    The following are specific standards related to the determination of carbon tetrachloride in drinking water:

  • EPA Method 551.1: This method specifies a procedure for determining VOCs, including carbon tetrachloride, in drinking water using gas chromatography.

  • ISO 14509:2005: This standard specifies requirements for the determination of VOCs in water by gas chromatography.

    • Standard Compliance Requirements for Different Industries

    Standard compliance is essential for various industries, including:

  • Drinking Water Utilities: Public water systems must comply with federal and state regulations regarding drinking water quality.

  • Industrial Facilities: Industrial facilities that discharge wastewater into public waterways must comply with environmental regulations.

  • Manufacturers of Drinking Water Treatment Chemicals: Manufacturers of drinking water treatment chemicals must comply with regulatory requirements for product safety and efficacy.

    • The determination of carbon tetrachloride in drinking water is essential to ensure public health and safety. The following are key standard requirements and needs:

  • Business and Technical Reasons: Conducting EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water testing is required by law and regulation.

  • Consequences of Not Performing This Test: Failure to detect carbon tetrachloride in drinking water can result in health risks to consumers, environmental damage, and liability for utilities and manufacturers.

  • Industries and Sectors that Require This Testing: Public water systems, industrial facilities, and manufacturers of drinking water treatment chemicals require this testing.

  • Risk Factors: Contaminated drinking water can pose health risks to consumers, including cancer, neurological damage, and reproductive problems.

    • Standard Development Process

    The standard development process for EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water involves the following steps:

    1. Proposal: A proposal is submitted to the EPA to revise an existing method or develop a new one.

    2. Drafting: The proposal is reviewed and drafted into a revised method or a new one.

    3. Balloting: The revised method or new one is balloted among stakeholders, including industry experts, regulatory agencies, and consumers.

    4. Approval: The revised method or new one is approved by the EPA.

    Standard Implementation

    Implementation of EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water involves the following steps:

    1. Training: Laboratory personnel must receive training on the method, including sample preparation, instrument operation, and data analysis.

    2. Equipment Calibration: Equipment used for the determination of carbon tetrachloride in drinking water must be calibrated regularly to ensure accuracy and precision.

    3. Quality Control/Quality Assurance (QC/QA): Laboratories must implement QC/QA procedures to ensure the accuracy and reliability of results.

    4. Reporting: Results must be reported to regulatory agencies, utilities, or manufacturers as required by law and regulation.

    Standard Maintenance

    Standard maintenance involves regular review and update of the method to reflect advances in technology, changes in regulatory requirements, or new scientific findings. The following are key steps for standard maintenance:

    1. Review: The method is reviewed regularly to ensure it remains current and relevant.

    2. Update: The method is updated as necessary to reflect advances in technology, changes in regulatory requirements, or new scientific findings.

    3. Balloting: The revised method is balloted among stakeholders, including industry experts, regulatory agencies, and consumers.

    4. Approval: The revised method is approved by the EPA.

    Standard Challenges and Opportunities

    The determination of carbon tetrachloride in drinking water presents several challenges and opportunities:

  • Challenges: Contaminated drinking water can pose health risks to consumers, environmental damage, and liability for utilities and manufacturers.

  • Opportunities: Improving laboratory testing methods and equipment can enhance public health and safety.

    • Standard Future Directions

    The future direction of EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water involves the following:

  • Advances in Technology: Advances in technology, such as improved laboratory instruments and sampling methods, will continue to improve the accuracy and reliability of results.

  • Changes in Regulatory Requirements: Changes in regulatory requirements, such as new MCLs or reporting requirements, will require updates to the method.

  • New Scientific Findings: New scientific findings on the health effects of carbon tetrachloride or other contaminants may lead to revisions to the method.

    • Conclusion

    The determination of carbon tetrachloride in drinking water is a critical aspect of ensuring public health and safety. The standard development process for EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water involves proposal, drafting, balloting, and approval. Implementation and maintenance of the method require regular review and update to reflect advances in technology, changes in regulatory requirements, or new scientific findings.

    Standard References

    The following are standard references for EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water:

  • EPA Method 551.1: This is a US Environmental Protection Agency (EPA) method for determining VOCs, including carbon tetrachloride, in drinking water.

  • ISO 14509:2005: This International Organization for Standardization (ISO) standard specifies requirements for the determination of VOCs in water by gas chromatography.

    • Standard Glossary

    The following are key terms and definitions related to EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water:

  • Volatile Organic Compounds (VOCs): These are organic chemicals that evaporate easily at room temperature.

  • Gas Chromatography: This is a laboratory technique used to separate, identify, and quantify the components of a mixture.

  • Drinking Water Utilities: Public water systems that provide drinking water to consumers.

    • Standard Contact Information

    The following are key contacts for EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water:

  • US Environmental Protection Agency (EPA): This is the US government agency responsible for environmental protection, including drinking water quality.

  • International Organization for Standardization (ISO): This is a global organization that develops and publishes international standards for various industries.

    • Standard Disclaimer

    The information provided in this guide is for general informational purposes only and should not be considered as professional advice. Laboratories, utilities, or manufacturers must consult the relevant regulatory agencies or industry associations for specific guidance on implementing EPA 551.1 Determination of Carbon Tetrachloride in Drinking Water.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers