EUROLAB
reach-compliance-testing-for-alkanes-c10-c13
REACH & SVHC Substance Testing Analysis of DEHP, DBP, and BBP under REACH Annex XVIIIdentification of CMR Substances under REACH RegulationPhthalates Content Testing According to REACH Annex XVIIREACH Annex XVII Restricted Substances Testing in Consumer GoodsREACH Annex XVII Testing for Borates in FertilizersREACH Annex XVII Testing for Cadmium in Paints and CoatingsREACH Annex XVII Testing for Formaldehyde in TextilesREACH Annex XVII Testing for Mercury in Switches and RelaysREACH Annex XVII Testing for Phenol in Food Contact MaterialsREACH Annex XVII Testing of Diisocyanates in SealantsREACH Annex XVII Testing of Flame Retardants in FurnitureREACH Annex XVII Testing of Organostannic CompoundsREACH Compliance Assessment for Industrial DetergentsREACH Compliance Assessment of High Production Volume ChemicalsREACH Compliance Testing for Bisphenol A (BPA)REACH Compliance Testing for Plasticizers in PVC ProductsREACH Compliance Testing for Toluene in Consumer ProductsREACH Compliance Testing of PFOA and Related CompoundsREACH Compliance Testing of Phenol in Wooden ToysREACH Compliance Testing of Textile Dyes for SVHCREACH Screening for Trichloroethylene in CoatingsREACH Screening of Arsenic and its CompoundsREACH Screening of Short-Chain Chlorinated Paraffins (SCCPs)REACH Screening of Siloxanes (D4, D5, D6) in Personal Care ProductsREACH SVHC Testing in Electrical and Electronic EquipmentREACH Testing for Anthracene Oil in Tire ManufacturingREACH Testing for Azocolourants and Azo Dyes in FabricsREACH Testing for Benzene in Adhesives and SealantsREACH Testing for Cyclododecane in Polymer BlendsREACH Testing for Cyclohexane in Rubber ProductsREACH Testing for Ethylene Oxide in Chemical MixturesREACH Testing for Formaldehyde in Paper and CardboardREACH Testing for Lead Content in Jewelry and AccessoriesREACH Testing for Methanol in Screen CleanersREACH Testing for Nickel Release from Metal SurfacesREACH Testing for Nonylphenol and Nonylphenol EthoxylatesREACH Testing for Solvent Mixtures in Industrial UseREACH Testing for Tetrabromobisphenol A (TBBPA)REACH Testing for Tris(2-chloroethyl) phosphate (TCEP)REACH Testing of Alkanes and Cycloalkanes in ChemicalsREACH Testing of Epoxy Resins for SVHCREACH Testing of Hydrocarbons in Printing InksREACH Testing of Monomers and Polymers for SVHC ContentREACH Testing of Textile Coatings for SVHCScreening of PAHs According to REACH RequirementsScreening of SVHC in Construction MaterialsSVHC Analysis in Detergents and Cleaning ProductsSVHC Analysis in Paint Thinners and SolventsSVHC Analysis in Toys as per REACH DirectiveSVHC Assessment in Cosmetic IngredientsSVHC Identification in Lubricants and GreasesSVHC Screening According to REACH Candidate ListSVHC Screening for 1,2-Dichloroethane in Paint RemoversSVHC Screening in Household Cleaning ProductsSVHC Screening in Medical DevicesSVHC Screening of Adhesives in Construction SectorSVHC Screening of Biocides under REACH RegulationSVHC Substance Analysis in BatteriesSVHC Substance Analysis in Epoxy CoatingsSVHC Substance Analysis in Laboratory ChemicalsSVHC Substance Identification in Automotive ComponentsSVHC Substance Identification in Electronics CasingsSVHC Substance Screening in Polyurethane FoamsSVHC Substance Testing in Aviation ComponentsSVHC Substance Testing in Packaging MaterialsSVHC Substance Testing in ThermoplasticsSVHC Testing in Leather and Textile ProductsSVHC Testing of Components in Office EquipmentTesting for DMF (Dimethylformamide) in Synthetic MaterialsTesting for Octamethylcyclotetrasiloxane (D4) under REACHTesting of Hexavalent Chromium in Metal Components under REACHTesting of REACH-Restricted Flame Retardants in Plastic Parts

REACH Compliance Testing for Alkanes C10-C13: Eurolabs Laboratory Testing Service

The Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) regulation is a European Union law that aims to improve the protection of human health and the environment from the risks posed by chemicals. REACH compliance testing for alkanes C10-C13 is a critical aspect of ensuring the safety and quality of various products.

Legal and Regulatory Framework

The REACH regulation is based on Article 95 of the European Unions (EU) General Framework Regulation, which requires that all chemical substances placed on the EU market be registered with the European Chemicals Agency (ECHA). The regulation applies to all manufacturers, importers, and downstream users of chemicals in the EU.

International and National Standards

The following international and national standards govern REACH compliance testing for alkanes C10-C13:

  • ISO 9001:2015 (Quality Management System)

  • EN 12974:2006 (Alkanes - Determination of boiling point and density)

  • TSE 1488 (Turkish Standard) on the determination of boiling point and density of alkanes

  • ASTM D287-13 (Standard Test Method for Specific Gravity or API Gravity of Crude Oils by Hydrometer)

  • OECD TG 107 (Partition Coefficient n-Octanol/Water - Shake Flask Method)

    • Standard Development Organizations

    The following standard development organizations play a crucial role in the development and maintenance of standards related to REACH compliance testing:

  • International Organization for Standardization (ISO)

  • European Committee for Standardization (CEN)

  • American Society for Testing and Materials (ASTM)

  • Organisation for Economic Co-operation and Development (OECD)

    • Standard Evolution and Updates

    Standards evolve over time as new technologies, methodologies, and research findings become available. The following are some of the key changes that have occurred in REACH compliance testing standards:

  • Update from ISO 9001:2008 to ISO 9001:2015

  • Revision of EN 12974:2006 to include new methods for determining boiling point and density

  • Development of TSE 1488 (Turkish Standard) on the determination of boiling point and density of alkanes

    • Standard Numbers and Scope

    The following are some of the key standard numbers and their scope related to REACH compliance testing:

    Standard Number Title

    --- ---

    ISO 9001:2015 Quality Management System - Requirements

    EN 12974:2006 Alkanes - Determination of boiling point and density

    TSE 1488 (Turkish Standard) Determination of boiling point and density of alkanes

    ASTM D287-13 Standard Test Method for Specific Gravity or API Gravity of Crude Oils by Hydrometer

    Standard Compliance Requirements

    Different industries have varying requirements for standard compliance:

  • Chemical manufacturers: Must comply with ISO 9001:2015 and EN 12974:2006

  • Oil refineries: Must comply with ASTM D287-13 and TSE 1488 (Turkish Standard)

  • Research institutions: May use a combination of standards, including OECD TG 107

    • Standard-Related Information Conclusion

    In conclusion, REACH compliance testing for alkanes C10-C13 is governed by various international and national standards. Understanding the legal and regulatory framework, as well as the standard development organizations and their role, is essential for ensuring compliance.

    ---

    REACH compliance testing for alkanes C10-C13 is necessary due to several business and technical reasons:

    Business Reasons

  • Compliance with EU regulations

  • Ensuring product safety and quality

  • Maintaining customer confidence and trust

  • Improving market positioning and competitiveness

    • Technical Reasons

  • Determining the boiling point and density of alkanes

  • Measuring the partition coefficient n-Octanol/Water

  • Assessing the chemical properties of alkanes

    • Consequences of Not Performing This Test

    Failure to perform REACH compliance testing for alkanes C10-C13 can result in:

  • Non-compliance with EU regulations

  • Product recalls and safety concerns

  • Damage to brand reputation and customer trust

  • Loss of market share and competitiveness

    • Industries Requiring This Testing

    The following industries require REACH compliance testing for alkanes C10-C13:

  • Chemical manufacturers

  • Oil refineries

  • Research institutions

  • Pharmaceuticals

  • Cosmetics

    • Risk Factors and Safety Implications

    REACH compliance testing for alkanes C10-C13 helps identify potential risks and safety concerns, including:

  • Toxicity and carcinogenicity

  • Environmental persistence and bioaccumulation

  • Physical hazards, such as explosions and fires

    • Quality Assurance and Quality Control

    Ensuring the quality of REACH compliance testing requires a robust quality management system, which includes:

  • Document control and record-keeping

  • Calibration and maintenance of equipment

  • Training and personnel qualifications

  • Internal audits and reviews

    • Standard Requirements and Needs Conclusion

    In conclusion, REACH compliance testing for alkanes C10-C13 is essential for ensuring product safety and quality, maintaining customer confidence and trust, and improving market positioning and competitiveness. Failure to perform this test can result in non-compliance with EU regulations, product recalls, and damage to brand reputation.

    ---

    A quality management system (QMS) is a framework that ensures the organization meets its objectives and maintains customer satisfaction. A QMS consists of:

  • Document control and record-keeping

  • Calibration and maintenance of equipment

  • Training and personnel qualifications

  • Internal audits and reviews

    • Quality Management System Benefits

    Implementing a QMS provides several benefits, including:

  • Improved product quality and safety

  • Enhanced customer satisfaction and loyalty

  • Increased market share and competitiveness

  • Reduced costs and improved efficiency

    • Standard-Related Information Conclusion

    In conclusion, REACH compliance testing for alkanes C10-C13 is governed by various international and national standards. Understanding the legal and regulatory framework, as well as the standard development organizations and their role, is essential for ensuring compliance.

    ---

    REACH Compliance Testing for Alkanes C10-C13: A Laboratory Testing Service

    Eurolabs REACH compliance testing service provides accurate and reliable results, ensuring that your products meet EU regulations. Our laboratory testing services include:

  • Determination of boiling point and density

  • Measurement of partition coefficient n-Octanol/Water

  • Assessment of chemical properties

    • Contact Us

    For more information on Eurolabs REACH compliance testing service, please contact us at infoeurolab.com(mailto:infoeurolab.com) or 1 800 123 4567.

    ---

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers