EUROLAB
testing-of-reach-restricted-flame-retardants-in-plastic-parts
REACH & SVHC Substance Testing Analysis of DEHP, DBP, and BBP under REACH Annex XVIIIdentification of CMR Substances under REACH RegulationPhthalates Content Testing According to REACH Annex XVIIREACH Annex XVII Restricted Substances Testing in Consumer GoodsREACH Annex XVII Testing for Borates in FertilizersREACH Annex XVII Testing for Cadmium in Paints and CoatingsREACH Annex XVII Testing for Formaldehyde in TextilesREACH Annex XVII Testing for Mercury in Switches and RelaysREACH Annex XVII Testing for Phenol in Food Contact MaterialsREACH Annex XVII Testing of Diisocyanates in SealantsREACH Annex XVII Testing of Flame Retardants in FurnitureREACH Annex XVII Testing of Organostannic CompoundsREACH Compliance Assessment for Industrial DetergentsREACH Compliance Assessment of High Production Volume ChemicalsREACH Compliance Testing for Alkanes C10-C13REACH Compliance Testing for Bisphenol A (BPA)REACH Compliance Testing for Plasticizers in PVC ProductsREACH Compliance Testing for Toluene in Consumer ProductsREACH Compliance Testing of PFOA and Related CompoundsREACH Compliance Testing of Phenol in Wooden ToysREACH Compliance Testing of Textile Dyes for SVHCREACH Screening for Trichloroethylene in CoatingsREACH Screening of Arsenic and its CompoundsREACH Screening of Short-Chain Chlorinated Paraffins (SCCPs)REACH Screening of Siloxanes (D4, D5, D6) in Personal Care ProductsREACH SVHC Testing in Electrical and Electronic EquipmentREACH Testing for Anthracene Oil in Tire ManufacturingREACH Testing for Azocolourants and Azo Dyes in FabricsREACH Testing for Benzene in Adhesives and SealantsREACH Testing for Cyclododecane in Polymer BlendsREACH Testing for Cyclohexane in Rubber ProductsREACH Testing for Ethylene Oxide in Chemical MixturesREACH Testing for Formaldehyde in Paper and CardboardREACH Testing for Lead Content in Jewelry and AccessoriesREACH Testing for Methanol in Screen CleanersREACH Testing for Nickel Release from Metal SurfacesREACH Testing for Nonylphenol and Nonylphenol EthoxylatesREACH Testing for Solvent Mixtures in Industrial UseREACH Testing for Tetrabromobisphenol A (TBBPA)REACH Testing for Tris(2-chloroethyl) phosphate (TCEP)REACH Testing of Alkanes and Cycloalkanes in ChemicalsREACH Testing of Epoxy Resins for SVHCREACH Testing of Hydrocarbons in Printing InksREACH Testing of Monomers and Polymers for SVHC ContentREACH Testing of Textile Coatings for SVHCScreening of PAHs According to REACH RequirementsScreening of SVHC in Construction MaterialsSVHC Analysis in Detergents and Cleaning ProductsSVHC Analysis in Paint Thinners and SolventsSVHC Analysis in Toys as per REACH DirectiveSVHC Assessment in Cosmetic IngredientsSVHC Identification in Lubricants and GreasesSVHC Screening According to REACH Candidate ListSVHC Screening for 1,2-Dichloroethane in Paint RemoversSVHC Screening in Household Cleaning ProductsSVHC Screening in Medical DevicesSVHC Screening of Adhesives in Construction SectorSVHC Screening of Biocides under REACH RegulationSVHC Substance Analysis in BatteriesSVHC Substance Analysis in Epoxy CoatingsSVHC Substance Analysis in Laboratory ChemicalsSVHC Substance Identification in Automotive ComponentsSVHC Substance Identification in Electronics CasingsSVHC Substance Screening in Polyurethane FoamsSVHC Substance Testing in Aviation ComponentsSVHC Substance Testing in Packaging MaterialsSVHC Substance Testing in ThermoplasticsSVHC Testing in Leather and Textile ProductsSVHC Testing of Components in Office EquipmentTesting for DMF (Dimethylformamide) in Synthetic MaterialsTesting for Octamethylcyclotetrasiloxane (D4) under REACHTesting of Hexavalent Chromium in Metal Components under REACH

Testing of REACH-Restricted Flame Retardants in Plastic Parts: A Comprehensive Guide

The Testing of REACH-Restricted Flame Retardants in Plastic Parts is governed by a range of international and national standards, including those from ISO, ASTM, EN, TSE, and others. These standards are developed and maintained by standard development organizations such as the International Organization for Standardization (ISO), the American Society for Testing and Materials (ASTM), and the European Committee for Electrotechnical Standardization (CENELEC).

Legal and Regulatory Framework

The testing of REACH-Restricted Flame Retardants in Plastic Parts is subject to a range of legal and regulatory requirements, including those related to REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) and the EUs General Safety Regulation (GSR). These regulations require manufacturers to ensure that their products meet specific safety standards, including those related to flammability.

International Standards

The following international standards are relevant to the testing of REACH-Restricted Flame Retardants in Plastic Parts:

  • ISO 5660: Fire tests on small structures - Heat release rate (HRR) for building products

  • ASTM E1354: Standard Test Method for Heat Release Rate (HRR) of Materials Using an Oxygen Consumption Calorimeter (OCC)

  • EN 13823: Fire resistance tests for service installations Part 1: General requirements

    • National Standards

    The following national standards are relevant to the testing of REACH-Restricted Flame Retardants in Plastic Parts:

  • TSE EN ISO 5660-1:2016 - Heat release rate (HRR) for building products

  • CEN/TS 16341:2013 - Fire-resistance tests on a single wall exposed to fire from one side Part 2: Test method and requirements

    • Standard Development Organizations

    The following standard development organizations are relevant to the testing of REACH-Restricted Flame Retardants in Plastic Parts:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Electrotechnical Standardization (CENELEC)

    • Standards Evolution and Update

    Standards evolve and get updated over time to reflect changes in technology, science, and regulatory requirements. The development of new standards is a collaborative process involving industry stakeholders, regulatory bodies, and standard development organizations.

    Standard Numbers and Scope

    The following are some relevant standard numbers and their scope:

  • ISO 5660: Fire tests on small structures - Heat release rate (HRR) for building products

    • Scope: This International Standard specifies a method for determining the heat release rate of materials used in building construction.

  • ASTM E1354: Standard Test Method for Heat Release Rate (HRR) of Materials Using an Oxygen Consumption Calorimeter (OCC)

    • Scope: This test method covers the determination of the heat release rate (HRR) of a material using an oxygen consumption calorimeter.

    Standard Compliance Requirements

    Manufacturers must comply with relevant standards and regulations to ensure that their products meet specific safety requirements. The following are some examples of standard compliance requirements:

  • Building materials: Manufacturers of building materials must comply with ISO 5660 and EN 13823.

  • Electrical equipment: Manufacturers of electrical equipment must comply with IEC 61439-1.

    • ...

    Why This Specific Test is Needed and Required

    The testing of REACH-Restricted Flame Retardants in Plastic Parts is necessary to ensure that products meet specific safety standards, including those related to flammability. This test is required by regulatory bodies, such as the EUs General Safety Regulation (GSR), and industry stakeholders.

    Business and Technical Reasons for Conducting Testing

    The testing of REACH-Restricted Flame Retardants in Plastic Parts is conducted to ensure that products meet specific safety standards, including those related to flammability. This test is also necessary to prevent accidents, injuries, and fatalities resulting from fires.

    Consequences of Not Performing This Test

    Not performing this test can result in:

  • Non-compliance with regulatory requirements

  • Accidents, injuries, and fatalities resulting from fires

  • Damage to reputation and brand image

  • Financial losses due to recalls, fines, and lawsuits

    • ...

    Step-by-Step Explanation of the Test

    The testing of REACH-Restricted Flame Retardants in Plastic Parts involves a range of steps, including:

    1. Sample preparation: The sample is prepared according to relevant standards.

    2. Testing equipment setup: The testing equipment is set up and calibrated according to relevant standards.

    3. Testing: The test is conducted according to relevant standards.

    4. Data analysis: The data collected during the test is analyzed according to relevant standards.

    Testing Equipment

    The following are some examples of testing equipment used in the testing of REACH-Restricted Flame Retardants in Plastic Parts:

  • Oxygen consumption calorimeter (OCC)

  • Heat release rate (HRR) meter

  • Thermocouples

    • ...

    Test Conditions

    The test conditions for the testing of REACH-Restricted Flame Retardants in Plastic Parts are specified by relevant standards, including ISO 5660 and EN 13823.

    ...

    Methodology

    The following is a general outline of the methodology used in the testing of REACH-Restricted Flame Retardants in Plastic Parts:

    1. Sample preparation

    2. Testing equipment setup

    3. Testing

    4. Data analysis

    ...

    Interpretation of Results

    The results from the testing of REACH-Restricted Flame Retardants in Plastic Parts must be interpreted according to relevant standards.

    ...

    Validation and Verification

    The testing of REACH-Restricted Flame Retardants in Plastic Parts must be validated and verified by a competent authority.

    ...

    Conclusion

    The testing of REACH-Restricted Flame Retardants in Plastic Parts is necessary to ensure that products meet specific safety standards, including those related to flammability. This test is required by regulatory bodies, such as the EUs General Safety Regulation (GSR), and industry stakeholders.

    The following are some key takeaways from this guide:

  • The testing of REACH-Restricted Flame Retardants in Plastic Parts is governed by a range of international and national standards.

  • Manufacturers must comply with relevant standards and regulations to ensure that their products meet specific safety requirements.

  • The test conditions for the testing of REACH-Restricted Flame Retardants in Plastic Parts are specified by relevant standards, including ISO 5660 and EN 13823.

    • ...

    References

    The following references were used in the preparation of this guide:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Electrotechnical Standardization (CENELEC)

    • ...

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers