EUROLAB
21-cfr-1745-general-requirements-for-indirect-food-additives-el
Extractables and Leachables 21 CFR 175.300 Resinous and Polymeric Coatings – Leachables Control21 CFR 176.170 Substances in Contact with Aqueous Foods – Extractables21 CFR 177.1520 Leachable Migration Limits for Polyolefins21 CFR 177.1630 Polyethylene Terephthalate Polymers – Leachables LimitASTM D6288 Volatile Organic Compounds Determination by GC/MSASTM D6499 N-nitrosamines Extraction from Rubber ComponentsASTM D7823 Screening of Phthalates in Plastic ComponentsASTM D7896 Analysis of Leachables in Water by LC-MS/MSASTM D8147 Non-Volatile Extractables in Polymeric MaterialsASTM E2406 Leachables from Sterile Barrier SystemsASTM F1980 Accelerated Aging for Stability of ExtractablesASTM F2459 Extractable Residue from Metallic Medical ComponentsASTM F3136 Evaluation of Leachables in Drug Delivery DevicesEMA Guideline on Plastic Immediate Packaging Materials – E&LEP 2.9.47 Container Closure System Integrity Testing for ExtractablesEP 3.1.3 Polyolefins in Contact with Injectable PreparationsEP 3.1.4 Polypropylene for Containers in ParenteralsEP 3.1.5 Polyethylene Used in Pharmaceutical ContainersEP 3.1.6 Polyethylene Terephthalate Containers – Leachable SafetyEP 3.2.2 Plastic Containers and Closures for Pharmaceutical UseEP 3.2.8 Closures for Containers for Aqueous Parenteral PreparationsEP 3.2.9 Rubber Closures – Extractables AnalysisEP 5.1.1 Biological Safety – Leachables Toxicity AssessmentFDA 21 CFR 211.94 Container Closure System Suitability – Extractables RiskFDA Guidance: Container Closure Systems for Drug Products – E&L FocusFDA Guidance: Orally Inhaled and Nasal Drug Products – Leachables ReviewHealth Canada GUI-0069 Plastic Components in Contact with Drug ProductsICH Q3D Risk-Based Assessment of Elemental Impurities in LeachablesISO 10993-12 Sample Preparation for Extractables TestingISO 10993-13 Degradation Products Analysis for Polymeric Medical DevicesISO 10993-14 Identification of Degradation Products from CeramicsISO 10993-15 Identification of Degradation Products from MetalsISO 10993-17 Toxicological Risk Assessment for LeachablesISO 10993-18 Chemical Characterization of Medical Device MaterialsISO 11607-1 Package Integrity for Sterile Medical DevicesISO 11607-2 Manufacturing Validation for Sterile Barrier SystemsISO 11979-5 Extractables in Intraocular Lens MaterialsISO 14937 Sterilization and Extractables Safety AssuranceISO 15759 Analysis of Packaging for Contact with Parenteral DrugsISO 17664 Processing of Leachable-Safe Reusable Medical DevicesISO 18562-1 Leachables Testing for Breathing Gas Pathways in HealthcareISO 18562-2 Volatile Organic Compounds Testing from Medical DevicesISO 18562-3 Condensate Leachables Testing from Gas Pathway EquipmentISO 18562-4 Leachable Particulates in Medical Gas Pathway DevicesISO/TR 10993-33 Guidance on E&L Assessment Strategy for DevicesJP 2.20 Extractables from Rubber Stoppers by GC-MSJP 6.02 Aluminum Cap Material Leachables TestingJP 6.07 Plastic Containers for Aqueous Injections – Leachable StandardsJP 6.10 Gas Permeability and Volatile Leachable ReleaseJP 7.02 Residual Solvent and Leachable IdentificationJP 7.04 Container/Closure Leachable Migration EvaluationPDA TR No. 66 Defining Leachables Risk in Biologics ProductionPDA TR No. 85 Extractables and Leachables in Manufacturing SystemsPh. Int. General Method 3.10 Leachable Profiling of Packaging MaterialsUSP <1031.1> Analytical Instrument Qualification for Extractables StudiesUSP <1031> Analytical Method Validation for Extractables StudiesUSP <1058> Analytical Instrument Qualification for Leachables TestingUSP <1079> Good Storage and Distribution Practices – Leachable RiskUSP <1086> Impurities – Extractables Risk ProfilingUSP <1088> Inhalation and Nasal Drug Products – Leachables TestingUSP <1207> Container Closure Integrity and Leachable EntryUSP <1231> Water for Pharmaceutical Purposes – Leachables RiskUSP <1661> Evaluation of Plastic Packaging Systems for Drug ProductsUSP <1663> Extractables Testing for Plastic Components in Drug PackagingUSP <1664> Leachables Analysis for Container Closure SystemsUSP <381> Elastomeric Closures for Injections: Extractable ProfileUSP <601> Aerosols – Extractables in Metered Dose InhalersUSP <661.1> Physicochemical Testing of Plastic Packaging SystemsUSP <661.2> Biological Reactivity Tests for Plastic MaterialsUSP <661> Packaging System Suitability for ExtractablesUSP <671> Stability and Buffering Capacity in Plastic ContainersUSP <800> Hazardous Drug Handling – Leachables from PackagingUSP <87> Biological Reactivity Test: In Vitro CytotoxicityUSP <88> Biological Reactivity Test: In Vivo Irritation & ToxicityUSP <905> Uniformity of Dosage Units – Leachable InfluenceWHO TRS 961 Annex 9 Guidelines on Packaging Materials – Leachables

A Comprehensive Guide to 21 CFR 174.5 General Requirements for Indirect Food Additives EL Laboratory Testing Service Provided by Eurolab

The testing service provided by Eurolab is governed by the relevant standards in the field of indirect food additives, as specified in 21 CFR 174.5. These standards are developed and maintained by international and national organizations to ensure consistency and reliability in laboratory testing.

Legal and Regulatory Framework

The legal and regulatory framework surrounding this testing service is complex and multifaceted. At the federal level, the U.S. Food and Drug Administration (FDA) regulates food additives, including indirect food additives, under the Federal Food, Drug, and Cosmetic Act (FFDCA). The FDA has established specific regulations for indirect food additives, which are outlined in 21 CFR 174.

International and National Standards

The testing service provided by Eurolab adheres to international standards developed by organizations such as:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Standardization (CEN)

  • Turkish Standards Institution (TSE)

    • These standards provide a framework for laboratory testing, including sampling, testing, and reporting procedures.

    Standard Development Organizations

    Standard development organizations play a crucial role in ensuring consistency and reliability in laboratory testing. These organizations include:

  • American National Standards Institute (ANSI)

  • International Electrotechnical Commission (IEC)

  • International Organization for Standardization (ISO)

    • These organizations develop and maintain standards, which are then adopted by national standards bodies.

    Standard Evolution and Updates

    Standards evolve over time to reflect new technologies, testing methods, and regulatory requirements. Eurolab stays up-to-date with the latest standards and updates to ensure that its testing services meet the most recent requirements.

    Specific Standard Numbers and Scope

    The following standard numbers and scope are relevant to 21 CFR 174.5 General Requirements for Indirect Food Additives EL testing:

  • ISO 17025:2017 - General requirements for the competence of testing and calibration laboratories

  • ASTM E1529-18 - Standard Practice for Sampling and Testing Materials for Chemical Resistance

    • Standard Compliance Requirements

    Compliance with standards is essential for laboratory testing services. Eurolab ensures that its testing services meet the most recent standards and requirements.

    ...

    (Continue with Standard Requirements and Needs section, or contact me to proceed)

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers