EUROLAB
astm-d2172-quantitative-extraction-of-bitumen-from-bituminous-paving-mixtures
Asphalt and Bitumen Testing AASHTO T240 Viscosity Determination of Asphalt Binder Using the Vacuum Capillary ViscometerAASHTO T279 Determining the Dynamic Modulus and Flow Number for Asphalt MixturesAASHTO T313 Determining the Asphalt Binder Content of Hot Mix AsphaltAASHTO T313 Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA)AASHTO T40 Sampling and Testing Bituminous MaterialsAASHTO T49 Determining the Softening Point of Bitumen (Ring-and-Ball Apparatus)AASHTO T59 Determining the Emulsion Content of Bituminous EmulsionsAASHTO T72 Sampling Bituminous MaterialsASTM D113 Ductility of Bituminous MaterialsASTM D1754 Standard Test Method for Emulsified AsphaltASTM D1856 Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)ASTM D217 Penetration of Bituminous MaterialsASTM D2489 Standard Practice for Estimating the Surface Area of AggregateASTM D2726 Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry SpecimensASTM D2950 Density of Bituminous Concrete in Place by Nuclear MethodsASTM D36 Softening Point of Bitumen (Ring-and-Ball Apparatus)ASTM D4124 Quantitative Separation of Asphalt Binder from Aggregate Using a Centrifuge Extraction MethodASTM D4402 Viscosity Determination of Asphalt at Elevated TemperaturesASTM D4867 Effect of Heat and Air on Asphalt Binder Using Thin Film Oven Test (TFOT)ASTM D4957 Preparation of Bituminous Specimens Using Marshall ApparatusASTM D5141 Bulk Specific Gravity of Compacted Bituminous Mixtures Using the Immersed MethodASTM D5444 Bulk Specific Gravity of Compacted Asphalt Mixtures Using Saturated Surface-Dry SpecimensASTM D5492 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)ASTM D5870 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)ASTM D5890 Determining the Rutting Susceptibility of Asphalt Binders Using a Dynamic Shear RheometerASTM D6114 Determination of Asphalt Binder Yield and Volumetric PropertiesASTM D6307 Standard Test Method for Asphalt Binder Content of Hot Mix Asphalt Using the Ignition MethodASTM D6601 Determining Rheological Properties of Asphalt Binder Using a Dynamic Shear RheometerASTM D6601 Standard Test Method for Determining Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)ASTM D6693 Determination of Tensile Strength and Tensile Creep Using the Asphalt Binder Cracking DeviceASTM D6926 Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)ASTM D6997 Standard Test Method for Bulk Specific Gravity of Compacted Asphalt Mixtures Using the Immersed MethodASTM D70 Specific Gravity and Density of Semi-Solid and Solid Bituminous MaterialsASTM D7405 Determining the Fatigue Life of Asphalt Binders Using the Linear Amplitude Sweep TestASTM D92 Flash and Fire Points by Cleveland Open Cup TesterBS EN 12594 Bitumen and Bituminous Binders - Sampling and Preparation of Test SamplesBS EN 13179-1 Bituminous Mixes - Test Methods for Hot Mix Asphalt - Part 1: SamplingEN 12591 Bitumen and Bituminous Binders - Specifications for Paving Grade BitumenEN 12607 Bitumen and Bituminous Binders - Determination of the Resistance to HardeningEN 12697-12 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 12: Determination of the Water Sensitivity of Bituminous SpecimensEN 12697-26 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 26: StiffnessEN 13036-1 Road Materials - Test Methods - Part 1: Sampling and Sample PreparationEN 1426 Bitumen and Bituminous Binders - Determination of Needle PenetrationEN 1427 Bitumen and Bituminous Binders - Determination of Softening Point - Ring and Ball MethodEN 1428 Bitumen and Bituminous Binders - Determination of Density and Bulk DensityISO 11357-3 Plastics - Differential Scanning Calorimetry (DSC)ISO 3015 Bitumen and Bituminous Binders - Determination of DuctilityISO 4625 Bitumen and Bituminous Binders - Determination of Softening PointISO 6615 Bitumen and Bituminous Binders - Determination of Flash and Fire Points

ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures Laboratory Testing Service: A Comprehensive Guide

The ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is governed by various international and national standards, including:

  • American Society for Testing and Materials (ASTM) Standard D2172

  • International Organization for Standardization (ISO) 1133-1:2005

  • European Committee for Standardization (CEN) EN 12350-2:2014

  • Turkish Standards Institution (TSE) TS EN 12697-1:2017

    • These standards outline the requirements and procedures for conducting quantitative extraction of bitumen from bituminous paving mixtures. The testing service is essential for ensuring the quality, performance, and durability of bituminous pavements.

    Legal and Regulatory Framework

    The ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is subject to various legal and regulatory requirements, including:

  • Compliance with national and international standards

  • Adherence to industry-specific regulations

  • Conformance to quality management systems (QMS) and accreditation requirements

    • International and National Standards

    The ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is covered by the following international and national standards:

  • ISO 1133-1:2005 - Determination of the thermal stability of bitumen

  • CEN EN 12350-2:2014 - Test methods for natural stone, rock and aggregate products (Part 2: Extraction of bitumen from aggregates)

  • TSE TS EN 12697-1:2017 - Bituminous mixtures - Test methods (Part 1: Sample preparation)

    • Standard Development Organizations

    The development and maintenance of standards for the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service are carried out by standard development organizations, including:

  • American Society for Testing and Materials (ASTM)

  • International Organization for Standardization (ISO)

  • European Committee for Standardization (CEN)

    • Standard Evolution and Updates

    Standards for the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service are regularly reviewed and updated to reflect advances in technology, changes in industry practices, and emerging regulatory requirements.

    Specific Standard Numbers and Scope

    The following standard numbers and scope apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • ASTM D2172 - Quantitative extraction of bitumen from bituminous paving mixtures

    • Scope: This test method covers the quantitative extraction of bitumen from bituminous paving mixtures using a solvent.

  • ISO 1133-1:2005 - Determination of the thermal stability of bitumen

    • Scope: This standard specifies the determination of the thermal stability of bitumen by measuring its softening point and penetration at elevated temperatures.

    Standard Compliance Requirements

    Compliance with relevant standards is essential for industries requiring the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service, including:

  • Road construction and maintenance

  • Materials production and supply

  • Quality control and assurance

  • Regulatory compliance and enforcement

    • The following table provides a summary of standard-related information for the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

    Standard Number Title Scope

    --- --- ---

    ASTM D2172 Quantitative extraction of bitumen from bituminous paving mixtures This test method covers the quantitative extraction of bitumen from bituminous paving mixtures using a solvent.

    ISO 1133-1:2005 Determination of the thermal stability of bitumen This standard specifies the determination of the thermal stability of bitumen by measuring its softening point and penetration at elevated temperatures.

    CEN EN 12350-2:2014 Test methods for natural stone, rock and aggregate products (Part 2: Extraction of bitumen from aggregates) This standard specifies the extraction of bitumen from aggregates using a solvent.

    The ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is essential for ensuring the quality, performance, and durability of bituminous pavements.

    Business and Technical Reasons

    Conducting the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is necessary to:

  • Ensure compliance with industry-specific regulations and standards

  • Verify the quality and performance of bituminous pavements

  • Meet emerging regulatory requirements

    • Industry-Specific Regulations

    The following industries require the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance

  • Materials production and supply

  • Quality control and assurance

  • Regulatory compliance and enforcement

    • Quality Management Systems (QMS)

    Conducting the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is essential for ensuring compliance with quality management systems (QMS) and accreditation requirements.

    Industry-Specific Regulations and Standards

    The following industry-specific regulations and standards apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance: ASTM D2172, ISO 1133-1:2005

  • Materials production and supply: CEN EN 12350-2:2014, TSE TS EN 12697-1:2017

  • Quality control and assurance: ASTM D2172, ISO 1133-1:2005

  • Regulatory compliance and enforcement: Industry-specific regulations and standards

    • Quality Management Systems (QMS) and Accreditation Requirements

    The following QMS and accreditation requirements apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Compliance with industry-specific regulations and standards

  • Adherence to quality management systems (QMS)

  • Conformance to accreditation requirements

    • The following table provides a summary of standard requirements and needs for the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

    Industry Standard Number Title Scope

    --- --- --- ---

    Road construction and maintenance ASTM D2172 Quantitative extraction of bitumen from bituminous paving mixtures This test method covers the quantitative extraction of bitumen from bituminous paving mixtures using a solvent.

    Materials production and supply CEN EN 12350-2:2014 Test methods for natural stone, rock and aggregate products (Part 2: Extraction of bitumen from aggregates) This standard specifies the extraction of bitumen from aggregates using a solvent.

    Quality control and assurance ASTM D2172 Quantitative extraction of bitumen from bituminous paving mixtures This test method covers the quantitative extraction of bitumen from bituminous paving mixtures using a solvent.

    Regulatory compliance and enforcement Industry-specific regulations and standards

    The following table provides a summary of standard-related information for the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

    Standard Number Title Scope

    --- --- ---

    ASTM D2172 Quantitative extraction of bitumen from bituminous paving mixtures This test method covers the quantitative extraction of bitumen from bituminous paving mixtures using a solvent.

    ISO 1133-1:2005 Determination of the thermal stability of bitumen This standard specifies the determination of the thermal stability of bitumen by measuring its softening point and penetration at elevated temperatures.

    CEN EN 12350-2:2014 Test methods for natural stone, rock and aggregate products (Part 2: Extraction of bitumen from aggregates) This standard specifies the extraction of bitumen from aggregates using a solvent.

    The ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is essential for ensuring compliance with industry-specific regulations and standards.

    Business and Technical Reasons

    Conducting the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is necessary to:

  • Ensure compliance with industry-specific regulations and standards

  • Verify the quality and performance of bituminous pavements

  • Meet emerging regulatory requirements

    • Industry-Specific Regulations

    The following industries require the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance

  • Materials production and supply

  • Quality control and assurance

  • Regulatory compliance and enforcement

    • Quality Management Systems (QMS)

    Conducting the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is essential for ensuring compliance with quality management systems (QMS) and accreditation requirements.

    Industry-Specific Regulations and Standards

    The following industry-specific regulations and standards apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance: ASTM D2172, ISO 1133-1:2005

  • Materials production and supply: CEN EN 12350-2:2014, TSE TS EN 12697-1:2017

  • Quality control and assurance: ASTM D2172, ISO 1133-1:2005

  • Regulatory compliance and enforcement: Industry-specific regulations and standards

    • Quality Management Systems (QMS) and Accreditation Requirements

    The following QMS and accreditation requirements apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Compliance with industry-specific regulations and standards

  • Adherence to quality management systems (QMS)

  • Conformance to accreditation requirements

    • The following table provides a summary of standard-related information for the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

    Standard Number Title Scope

    --- --- ---

    ASTM D2172 Quantitative extraction of bitumen from bituminous paving mixtures This test method covers the quantitative extraction of bitumen from bituminous paving mixtures using a solvent.

    ISO 1133-1:2005 Determination of the thermal stability of bitumen This standard specifies the determination of the thermal stability of bitumen by measuring its softening point and penetration at elevated temperatures.

    CEN EN 12350-2:2014 Test methods for natural stone, rock and aggregate products (Part 2: Extraction of bitumen from aggregates) This standard specifies the extraction of bitumen from aggregates using a solvent.

    Quality Management Systems (QMS)

    The following quality management systems (QMS) apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Compliance with industry-specific regulations and standards

  • Adherence to quality management systems (QMS)

  • Conformance to accreditation requirements

    • Industry-Specific Regulations and Standards

    The following industry-specific regulations and standards apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance: ASTM D2172, ISO 1133-1:2005

  • Materials production and supply: CEN EN 12350-2:2014, TSE TS EN 12697-1:2017

  • Quality control and assurance: ASTM D2172, ISO 1133-1:2005

  • Regulatory compliance and enforcement: Industry-specific regulations and standards

    • The ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is essential for ensuring compliance with industry-specific regulations and standards.

    Business and Technical Reasons

    Conducting the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is necessary to:

  • Ensure compliance with industry-specific regulations and standards

  • Verify the quality and performance of bituminous pavements

  • Meet emerging regulatory requirements

    • Industry-Specific Regulations

    The following industries require the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance

  • Materials production and supply

  • Quality control and assurance

  • Regulatory compliance and enforcement

    • Quality Management Systems (QMS)

    Conducting the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is essential for ensuring compliance with quality management systems (QMS) and accreditation requirements.

    Industry-Specific Regulations and Standards

    The following industry-specific regulations and standards apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance: ASTM D2172, ISO 1133-1:2005

  • Materials production and supply: CEN EN 12350-2:2014, TSE TS EN 12697-1:2017

  • Quality control and assurance: ASTM D2172, ISO 1133-1:2005

  • Regulatory compliance and enforcement: Industry-specific regulations and standards

    • The following table provides a summary of standard requirements and needs for the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

    Industry Standard Number Title Scope

    --- --- --- ---

    Road construction and maintenance ASTM D2172 Quantitative extraction of bitumen from bituminous paving mixtures This test method covers the quantitative extraction of bitumen from bituminous paving mixtures using a solvent.

    Materials production and supply CEN EN 12350-2:2014 Test methods for natural stone, rock and aggregate products (Part 2: Extraction of bitumen from aggregates) This standard specifies the extraction of bitumen from aggregates using a solvent.

    Quality control and assurance ASTM D2172 Quantitative extraction of bitumen from bituminous paving mixtures This test method covers the quantitative extraction of bitumen from bituminous paving mixtures using a solvent.

    Regulatory compliance and enforcement Industry-specific regulations and standards

    Quality Management Systems (QMS)

    The following quality management systems (QMS) apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Compliance with industry-specific regulations and standards

  • Adherence to quality management systems (QMS)

  • Conformance to accreditation requirements

    • Industry-Specific Regulations and Standards

    The following industry-specific regulations and standards apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance: ASTM D2172, ISO 1133-1:2005

  • Materials production and supply: CEN EN 12350-2:2014, TSE TS EN 12697-1:2017

  • Quality control and assurance: ASTM D2172, ISO 1133-1:2005

  • Regulatory compliance and enforcement: Industry-specific regulations and standards

    • The ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is essential for ensuring compliance with industry-specific regulations and standards.

    Business and Technical Reasons

    Conducting the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is necessary to:

  • Ensure compliance with industry-specific regulations and standards

  • Verify the quality and performance of bituminous pavements

  • Meet emerging regulatory requirements

    • Industry-Specific Regulations

    The following industries require the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance

  • Materials production and supply

  • Quality control and assurance

  • Regulatory compliance and enforcement

    • Quality Management Systems (QMS)

    Conducting the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service is essential for ensuring compliance with quality management systems (QMS) and accreditation requirements.

    Industry-Specific Regulations and Standards

    The following industry-specific regulations and standards apply to the ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures testing service:

  • Road construction and maintenance: ASTM D2172, ISO 1133-1:2005

  • Materials production and supply: CEN EN 12350-2:2014, TSE TS EN 12697-1:2017

  • Quality control and assurance: ASTM D2172, ISO 1133-1:2005

  • Regulatory compliance and enforcement: Industry-specific regulations and standards

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers