EUROLAB
iso-11357-3-plastics-differential-scanning-calorimetry-dsc
Asphalt and Bitumen Testing AASHTO T240 Viscosity Determination of Asphalt Binder Using the Vacuum Capillary ViscometerAASHTO T279 Determining the Dynamic Modulus and Flow Number for Asphalt MixturesAASHTO T313 Determining the Asphalt Binder Content of Hot Mix AsphaltAASHTO T313 Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA)AASHTO T40 Sampling and Testing Bituminous MaterialsAASHTO T49 Determining the Softening Point of Bitumen (Ring-and-Ball Apparatus)AASHTO T59 Determining the Emulsion Content of Bituminous EmulsionsAASHTO T72 Sampling Bituminous MaterialsASTM D113 Ductility of Bituminous MaterialsASTM D1754 Standard Test Method for Emulsified AsphaltASTM D1856 Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)ASTM D217 Penetration of Bituminous MaterialsASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving MixturesASTM D2489 Standard Practice for Estimating the Surface Area of AggregateASTM D2726 Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry SpecimensASTM D2950 Density of Bituminous Concrete in Place by Nuclear MethodsASTM D36 Softening Point of Bitumen (Ring-and-Ball Apparatus)ASTM D4124 Quantitative Separation of Asphalt Binder from Aggregate Using a Centrifuge Extraction MethodASTM D4402 Viscosity Determination of Asphalt at Elevated TemperaturesASTM D4867 Effect of Heat and Air on Asphalt Binder Using Thin Film Oven Test (TFOT)ASTM D4957 Preparation of Bituminous Specimens Using Marshall ApparatusASTM D5141 Bulk Specific Gravity of Compacted Bituminous Mixtures Using the Immersed MethodASTM D5444 Bulk Specific Gravity of Compacted Asphalt Mixtures Using Saturated Surface-Dry SpecimensASTM D5492 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)ASTM D5870 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)ASTM D5890 Determining the Rutting Susceptibility of Asphalt Binders Using a Dynamic Shear RheometerASTM D6114 Determination of Asphalt Binder Yield and Volumetric PropertiesASTM D6307 Standard Test Method for Asphalt Binder Content of Hot Mix Asphalt Using the Ignition MethodASTM D6601 Determining Rheological Properties of Asphalt Binder Using a Dynamic Shear RheometerASTM D6601 Standard Test Method for Determining Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)ASTM D6693 Determination of Tensile Strength and Tensile Creep Using the Asphalt Binder Cracking DeviceASTM D6926 Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)ASTM D6997 Standard Test Method for Bulk Specific Gravity of Compacted Asphalt Mixtures Using the Immersed MethodASTM D70 Specific Gravity and Density of Semi-Solid and Solid Bituminous MaterialsASTM D7405 Determining the Fatigue Life of Asphalt Binders Using the Linear Amplitude Sweep TestASTM D92 Flash and Fire Points by Cleveland Open Cup TesterBS EN 12594 Bitumen and Bituminous Binders - Sampling and Preparation of Test SamplesBS EN 13179-1 Bituminous Mixes - Test Methods for Hot Mix Asphalt - Part 1: SamplingEN 12591 Bitumen and Bituminous Binders - Specifications for Paving Grade BitumenEN 12607 Bitumen and Bituminous Binders - Determination of the Resistance to HardeningEN 12697-12 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 12: Determination of the Water Sensitivity of Bituminous SpecimensEN 12697-26 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 26: StiffnessEN 13036-1 Road Materials - Test Methods - Part 1: Sampling and Sample PreparationEN 1426 Bitumen and Bituminous Binders - Determination of Needle PenetrationEN 1427 Bitumen and Bituminous Binders - Determination of Softening Point - Ring and Ball MethodEN 1428 Bitumen and Bituminous Binders - Determination of Density and Bulk DensityISO 3015 Bitumen and Bituminous Binders - Determination of DuctilityISO 4625 Bitumen and Bituminous Binders - Determination of Softening PointISO 6615 Bitumen and Bituminous Binders - Determination of Flash and Fire Points

ISO 11357-3 Plastics - Differential Scanning Calorimetry (DSC) Laboratory Testing Service: A Comprehensive Guide

Standard-Related Information

Differential Scanning Calorimetry (DSC) is a widely accepted laboratory testing method used to determine the thermal properties of materials. The ISO 11357-3 standard specifies the requirements for DSC testing of plastics, which is an essential parameter in understanding their behavior under various conditions.

Relevant Standards:

  • ISO 11357-3:2016 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of specific heat capacity

  • ASTM D3418-08 Standard Test Method for Thermal Transient Analysis (TTA) of Heat Transfer with a Point Source

  • EN 14884:2007A1:2010 Plastics - Differential scanning calorimetry (DSC)

  • TSE 1152-EN ISO 11357-3:2016 Plastics - Differential scanning calorimetry (DSC)

    • Legal and Regulatory Framework:

    The ISO 11357-3 standard is a globally recognized testing method, and its adoption ensures compliance with various regulations and standards. In the European Union, for example, the standard is referenced in several directives, including:

  • EU Directive 2009/48/EC on the safety of machinery

  • EU Directive 94/25/EC on amending Directives 90/679/EEC and 89/686/EEC

    • International and National Standards:

    DSC testing is a mandatory requirement in several industries, including:

  • Automotive (e.g., European Unions Euro 5 and Euro 6 emissions regulations)

  • Aerospace

  • Medical devices (e.g., ISO 13485:2016)

    • Standard Development Organizations:

    The International Organization for Standardization (ISO) is the primary standard development organization responsible for developing and maintaining the ISO 11357-3 standard. Other organizations, such as ASTM International and the European Committee for Standardization (CEN), also contribute to the development of related standards.

    Standards Evolution and Update:

    Standards evolve over time to reflect advances in technology, changes in regulations, and emerging industry needs. The ISO 11357-3 standard has undergone several revisions since its initial publication in 1999.

    Standard Compliance Requirements:

    Compliance with the ISO 11357-3 standard is essential for ensuring product safety, reliability, and performance. Manufacturers must demonstrate conformity to regulatory requirements through testing and certification.

    Industry-Specific Examples and Case Studies:

  • A leading automotive manufacturer required DSC testing of its plastic components to ensure compliance with EU emissions regulations.

  • A medical device manufacturer used ISO 11357-3-compliant DSC testing to validate the thermal properties of a new implantable device.

    • Standard Requirements and Needs

    The need for DSC testing arises from various business and technical reasons, including:

  • Regulatory Compliance: Manufacturers must comply with industry-specific regulations, such as those mentioned earlier.

  • Product Safety and Reliability: DSC testing ensures that products perform as expected under various conditions.

  • Competitive Advantage: Companies that invest in DSC testing can differentiate themselves from competitors.

    • Industries and Sectors:

    DSC testing is a mandatory requirement in several industries, including:

  • Automotive

  • Aerospace

  • Medical devices

    • Risk Factors and Safety Implications:

    Failure to comply with regulatory requirements or perform DSC testing can result in significant financial losses, reputational damage, and even product recalls.

    Quality Assurance and Quality Control Aspects:

    DSC testing must be performed by trained personnel using calibrated equipment. Manufacturers should maintain records of testing procedures, results, and any corrective actions taken.

    Contribution to Product Safety and Reliability:

    DSC testing ensures that products meet regulatory requirements, which enhances product safety and reliability.

    Competitive Advantages:

    Companies that invest in DSC testing can differentiate themselves from competitors by demonstrating a commitment to quality and regulatory compliance.

    Test Conditions and Methodology

    The following section provides detailed information on the test conditions and methodology for ISO 11357-3-compliant DSC testing:

  • Step-by-Step Explanation: The test procedure involves several steps, including sample preparation, equipment calibration, and data analysis.

  • Testing Equipment and Instruments: Calibrated DSC instruments are used to measure thermal properties.

  • Testing Environment Requirements: Temperature, humidity, and pressure conditions must be controlled during testing.

    • Test Reporting and Documentation

    The following section provides information on test reporting and documentation for ISO 11357-3-compliant DSC testing:

  • Report Format and Content: Reports must include specific information, such as sample identification, testing procedures, and results.

  • Data Analysis and Interpretation: Results are analyzed using specialized software to determine thermal properties.

    • Industry-Specific Examples and Case Studies:

  • A leading automotive manufacturer required DSC testing of its plastic components to ensure compliance with EU emissions regulations.

  • A medical device manufacturer used ISO 11357-3-compliant DSC testing to validate the thermal properties of a new implantable device.

    • Please note that this is a condensed version of the comprehensive guide, and you may need to expand on each section to provide more detailed information. Additionally, you can include tables, figures, or diagrams to support the text and make it more informative and visually appealing.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers