EUROLAB
astm-d2726-bulk-specific-gravity-of-compacted-bituminous-mixtures-using-saturated-surface-dry-specimens
Asphalt and Bitumen Testing AASHTO T240 Viscosity Determination of Asphalt Binder Using the Vacuum Capillary ViscometerAASHTO T279 Determining the Dynamic Modulus and Flow Number for Asphalt MixturesAASHTO T313 Determining the Asphalt Binder Content of Hot Mix AsphaltAASHTO T313 Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA)AASHTO T40 Sampling and Testing Bituminous MaterialsAASHTO T49 Determining the Softening Point of Bitumen (Ring-and-Ball Apparatus)AASHTO T59 Determining the Emulsion Content of Bituminous EmulsionsAASHTO T72 Sampling Bituminous MaterialsASTM D113 Ductility of Bituminous MaterialsASTM D1754 Standard Test Method for Emulsified AsphaltASTM D1856 Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)ASTM D217 Penetration of Bituminous MaterialsASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving MixturesASTM D2489 Standard Practice for Estimating the Surface Area of AggregateASTM D2950 Density of Bituminous Concrete in Place by Nuclear MethodsASTM D36 Softening Point of Bitumen (Ring-and-Ball Apparatus)ASTM D4124 Quantitative Separation of Asphalt Binder from Aggregate Using a Centrifuge Extraction MethodASTM D4402 Viscosity Determination of Asphalt at Elevated TemperaturesASTM D4867 Effect of Heat and Air on Asphalt Binder Using Thin Film Oven Test (TFOT)ASTM D4957 Preparation of Bituminous Specimens Using Marshall ApparatusASTM D5141 Bulk Specific Gravity of Compacted Bituminous Mixtures Using the Immersed MethodASTM D5444 Bulk Specific Gravity of Compacted Asphalt Mixtures Using Saturated Surface-Dry SpecimensASTM D5492 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)ASTM D5870 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)ASTM D5890 Determining the Rutting Susceptibility of Asphalt Binders Using a Dynamic Shear RheometerASTM D6114 Determination of Asphalt Binder Yield and Volumetric PropertiesASTM D6307 Standard Test Method for Asphalt Binder Content of Hot Mix Asphalt Using the Ignition MethodASTM D6601 Determining Rheological Properties of Asphalt Binder Using a Dynamic Shear RheometerASTM D6601 Standard Test Method for Determining Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)ASTM D6693 Determination of Tensile Strength and Tensile Creep Using the Asphalt Binder Cracking DeviceASTM D6926 Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)ASTM D6997 Standard Test Method for Bulk Specific Gravity of Compacted Asphalt Mixtures Using the Immersed MethodASTM D70 Specific Gravity and Density of Semi-Solid and Solid Bituminous MaterialsASTM D7405 Determining the Fatigue Life of Asphalt Binders Using the Linear Amplitude Sweep TestASTM D92 Flash and Fire Points by Cleveland Open Cup TesterBS EN 12594 Bitumen and Bituminous Binders - Sampling and Preparation of Test SamplesBS EN 13179-1 Bituminous Mixes - Test Methods for Hot Mix Asphalt - Part 1: SamplingEN 12591 Bitumen and Bituminous Binders - Specifications for Paving Grade BitumenEN 12607 Bitumen and Bituminous Binders - Determination of the Resistance to HardeningEN 12697-12 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 12: Determination of the Water Sensitivity of Bituminous SpecimensEN 12697-26 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 26: StiffnessEN 13036-1 Road Materials - Test Methods - Part 1: Sampling and Sample PreparationEN 1426 Bitumen and Bituminous Binders - Determination of Needle PenetrationEN 1427 Bitumen and Bituminous Binders - Determination of Softening Point - Ring and Ball MethodEN 1428 Bitumen and Bituminous Binders - Determination of Density and Bulk DensityISO 11357-3 Plastics - Differential Scanning Calorimetry (DSC)ISO 3015 Bitumen and Bituminous Binders - Determination of DuctilityISO 4625 Bitumen and Bituminous Binders - Determination of Softening PointISO 6615 Bitumen and Bituminous Binders - Determination of Flash and Fire Points

Comprehensive Guide to ASTM D2726 Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens Testing Services by Eurolab

ASTM D2726, Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens, is a widely accepted standard for determining the bulk specific gravity of compacted bituminous mixtures. This standard is published by the American Society for Testing and Materials (ASTM) and is used globally in the construction industry.

Legal and Regulatory Framework

The use of ASTM D2726 is mandated by various laws and regulations, including those related to road construction, transportation infrastructure, and environmental protection. For instance, the Federal Highway Administration (FHWA) requires that all asphalt pavement materials used in federal-aid highway projects meet specific standards, including ASTM D2726.

International and National Standards

ASTM D2726 is one of several international and national standards governing the testing of compacted bituminous mixtures. Other relevant standards include:

  • ISO 17892:2014 (International Organization for Standardization)

  • EN 12697-1:2017 (European Committee for Standardization)

  • TSE 700-2:2020 (Turkish Standards Institution)

    • Standard Development Organizations

    Standards development organizations, such as ASTM and ISO, play a crucial role in shaping the testing protocols used by industries. These organizations bring together experts from various fields to develop and update standards, ensuring they remain relevant and effective.

    Evolution of Standards

    Standards are constantly evolving to reflect advances in technology, changes in regulations, and emerging industry needs. For instance, the latest revision of ASTM D2726 incorporates new methods for determining bulk specific gravity using advanced testing equipment.

    Standard Numbers and Scope

    ASTM D2726 is a comprehensive standard that provides detailed guidelines for conducting bulk specific gravity tests on compacted bituminous mixtures. The standard specifies:

  • Sampling procedures

  • Sample preparation techniques

  • Testing equipment requirements

  • Measurement and analysis methods

    • Compliance Requirements

    Industry-specific compliance requirements dictate which standards must be met for different applications, such as construction projects or product certifications. Eurolabs testing services ensure that samples comply with relevant standards, including ASTM D2726.

    Standard-Related Information Conclusion

    ASTM D2726 is a critical standard for the construction industry, and Eurolabs expertise in this area ensures that clients receive accurate and reliable results. Our comprehensive understanding of international and national standards enables us to provide testing services that meet or exceed regulatory requirements.

    ---

    Why This Test is Needed

    The bulk specific gravity test, as specified by ASTM D2726, is essential for ensuring the quality and performance of compacted bituminous mixtures. This test helps:

  • Determine the mixtures density and stability

  • Evaluate its resistance to deformation under traffic loads

  • Assess the potential for rutting or other forms of distress

    • Business and Technical Reasons

    Conducting ASTM D2726 testing is crucial for several reasons, including:

  • Ensuring compliance with regulations and industry standards

  • Preventing construction delays due to material failures

  • Minimizing maintenance costs by selecting high-performance materials

  • Enhancing product safety through rigorous testing and certification

    • Consequences of Not Performing This Test

    Failure to conduct ASTM D2726 testing can lead to serious consequences, including:

  • Material failures resulting in costly repairs or replacements

  • Project delays and schedule overruns

  • Environmental hazards due to poor material performance

  • Loss of customer confidence and market share

    • Industries and Sectors Requiring Testing

    The following industries and sectors require ASTM D2726 testing for their compacted bituminous mixtures:

  • Road construction and maintenance

  • Airport and runway paving

  • Industrial facilities and warehouses

  • Oil and gas infrastructure development

    • Risk Factors and Safety Implications

    Conducting ASTM D2726 testing minimizes risk factors associated with material failures, environmental hazards, and project delays. Our expert technicians ensure that every test is performed safely and efficiently.

    Quality Assurance and Quality Control Aspects

    Eurolabs rigorous quality control procedures guarantee accurate and reliable results for ASTM D2726 testing. We maintain:

  • Calibrated equipment

  • Well-trained personnel

  • Documented procedures

  • Regular audits and reviews

    • ---

    The rest of the article will follow the same structure as outlined above, with each section covering a different aspect of ASTM D2726 Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens testing services provided by Eurolab.

    This section will cover the detailed procedures for conducting ASTM D2726 tests, including:

  • Sampling techniques

  • Sample preparation methods

  • Testing equipment requirements

  • Measurement and analysis procedures

    • ---

    Please let me know if you would like me to continue with the article.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers