EUROLAB
astm-g123-corrosion-of-stainless-steel-in-marine-environments
Corrosion & Salt Spray Testing ASTM B117 Salt Spray (Fog) Testing for Corrosion ResistanceASTM B368 Cyclic Corrosion Testing for CoatingsASTM D1654 Evaluation of Painted or Coated Specimens Subjected to CorrosionASTM D3359 Adhesion Testing of Coatings (Cross-cut)ASTM D4541 Pull-Off Adhesion TestingASTM D610 Evaluation of Rusting on Painted Steel SurfacesASTM D610 Rust Grade RatingASTM D714 Blistering Evaluation on CoatingsASTM D714 Blistering Test for Paints and CoatingsASTM G1 Preparation of Metal Surfaces for Corrosion TestingASTM G101 Environmental Stress Cracking TestingASTM G109 Cathodic Disbondment TestingASTM G110 Corrosion Fatigue Crack GrowthASTM G123 Corrosion in Marine EnvironmentsASTM G129 Corrosion Testing in Chloride EnvironmentsASTM G142 Hydrogen Evolution MeasurementASTM G150 Electrochemical Noise MeasurementsASTM G170 Standard Practice for Testing Materials in CO2 EnvironmentsASTM G192 Evaluation of Corrosion Product FormationASTM G199 Corrosion Testing Under Cathodic ProtectionASTM G28 Laboratory Evaluation of the Corrosivity of SoilASTM G31 Immersion Corrosion TestingASTM G31 Laboratory Corrosion Testing of MetalsASTM G36 Hydrogen Embrittlement TestingASTM G36 Hydrogen Embrittlement TestsASTM G44 Cyclic Corrosion TestingASTM G46 Evaluation of Corrosion Under CoatingsASTM G46 Evaluation of Localized CorrosionASTM G49 Stress Corrosion Cracking Tests in MetalsASTM G5 Anodic Polarization TestingASTM G5 Potentiodynamic Polarization CurvesASTM G59 Electrochemical Impedance Spectroscopy (EIS)ASTM G61 Sulfide Stress Cracking TestingASTM G71 Preparation of Corrosion Testing SolutionsASTM G71 Preparation of Electrolytes for Corrosion TestingASTM G72 Hydrogen EmbrittlementASTM G78 Pitting Corrosion TestingASTM G85 Annex A Acidified Salt Spray (Fog) TestingASTM G85 Annex B Seawater Acidified TestASTM G85 Annex C Cyclic Acidified Salt SprayASTM G85 Annex D Seawater Spray TestASTM G85 Annex E Combined Salt Spray and SO2 ExposureASTM G85 Annex F Acidified Synthetic Seawater SprayASTM G85 Annex G Cyclic Prohesion TestASTM G85 Modified Salt Spray TestingASTM G94 Corrosion Testing of TitaniumASTM G95 Corrosion Fatigue TestingISO 11314 Stress Cracking TestingISO 11462 Electrolyte PreparationISO 11462 Preparation of Test SolutionsISO 11463 Anodic Polarization CurvesISO 11463 Corrosion Testing of Metals by Potentiodynamic PolarizationISO 11463 Potentiodynamic TestingISO 11960 Titanium Corrosion TestingISO 15156 Corrosion in Chloride EnvironmentsISO 15156 Corrosion Testing in CO2 EnvironmentsISO 15589-1 Cathodic Protection TestingISO 16701 Cyclic Corrosion TestingISO 16701 Cyclic Corrosion Testing of CoatingsISO 16773 Electrochemical Impedance Spectroscopy for CorrosionISO 17074 Hydrogen Gas EvolutionISO 17075 Soil Corrosion TestingISO 17475 Electrochemical Testing of CorrosionISO 17475 Immersion TestingISO 17864 Corrosion Rate MeasurementISO 17872 Pitting Corrosion ResistanceISO 17872 Pitting Corrosion TestingISO 17941 Electrochemical Noise AnalysisISO 20340 Corrosion Under Coating EvaluationISO 21809-2 Testing of Anti-corrosion CoatingsISO 2409 Paint Adhesion TestingISO 4624 Adhesion of CoatingsISO 4628-2 Blistering in CoatingsISO 4628-2 Blistering Test for CoatingsISO 4628-3 Rust EvaluationISO 4628-3 Rust Grade AssessmentISO 4628-8 Assessment of Filiform CorrosionISO 4628-8 Evaluation of Degradation of Coatings – Filiform CorrosionISO 6988 Neutral Salt Spray TestISO 7539-2 Stress Corrosion CrackingISO 7539-2 Stress Corrosion Cracking TestingISO 7539-4 Hydrogen Embrittlement TestingISO 7539-5 Slow Strain Rate TestingISO 7539-6 Sulfide Stress CrackingISO 7539-7 Crack Growth TestingISO 7539-8 Corrosion FatigueISO 7539-9 Testing of Stainless Steel CorrosionISO 8407 Surface Preparation for Corrosion TestingISO 9223 Corrosion Rates in Atmospheric EnvironmentsISO 9227 Annex B for Modified Salt SprayISO 9227 Annex C Cyclic Salt SprayISO 9227 Annex D Seawater SprayISO 9227 Annex E Combined Corrosion TestingISO 9227 Annex F Acidified Seawater SprayISO 9227 Annex G Prohesion Corrosion TestingISO 9227 Annexes for Modified Salt SprayISO 9227 Corrosion Tests in Artificial Atmospheres – Salt Spray Tests

ASTM G123 Corrosion of Stainless Steel in Marine Environments Laboratory Testing Service Provided by Eurolab

ASTM G123 is a widely recognized standard for testing the corrosion resistance of stainless steel in marine environments. The standard is developed and published by the American Society for Testing and Materials (ASTM) International, a globally renowned organization that sets standards for various materials, products, and services.

Legal and Regulatory Framework

The legal and regulatory framework surrounding ASTM G123 Corrosion of Stainless Steel in Marine Environments testing is governed by international and national standards. These include:

  • ISO 15614-1:2015 - Welding -- Qualification testing of welders -- Part 1: Steels

  • EN 10088-2:2005 - Stainless steels -- Part 2: Technical delivery conditions for sheet/plate and strip of corrosion-resistant stainless steels for general purposes

  • TSE ISO 15614-1:2014 - Welding -- Qualification testing of welders -- Part 1: Steels

    • Standard Development Organizations

    The development of ASTM G123 is overseen by the following standard development organizations:

  • American Society for Testing and Materials (ASTM) International

  • International Organization for Standardization (ISO)

  • European Committee for Standardization (CEN)

    • These organizations work together to ensure that standards are developed, published, and updated to reflect changing requirements.

    Standard Evolution and Update

    Standards evolve over time as new technologies, materials, and practices emerge. The ASTM G123 standard is reviewed and updated regularly to ensure it remains relevant and effective.

    Standard Numbers and Scope

    The following are the relevant standard numbers and their scope:

  • ASTM G123-18: Standard Practice for Evaluation of Stainless Steel in Marine Environments

  • ISO 15614-1:2015 - Welding -- Qualification testing of welders -- Part 1: Steels

  • EN 10088-2:2005 - Stainless steels -- Part 2: Technical delivery conditions for sheet/plate and strip of corrosion-resistant stainless steels for general purposes

    • Standard Compliance Requirements

    Compliance with ASTM G123 is required in various industries, including:

  • Construction

  • Oil and gas

  • Aerospace

  • Automotive

  • Marine

    • ASTM G123 Corrosion of Stainless Steel in Marine Environments testing is essential for ensuring the durability and reliability of stainless steel components used in marine environments. The standard requires that materials be tested under controlled conditions to simulate real-world exposure.

    The standard specifies the following:

  • Test environment: Seawater or saltwater

  • Temperature: 25C 2C (77F 3.6F)

  • pH: 7.5 0.5

  • Exposure duration: Minimum of 1,000 hours

    • ASTM G123 Corrosion of Stainless Steel in Marine Environments testing is required to ensure the following:

  • Business and Technical Reasons: The test is necessary for assessing the corrosion resistance of stainless steel components used in marine environments.

  • Consequences of Not Performing the Test: Failure to perform this test can result in reduced product lifespan, increased maintenance costs, and compromised safety.

    • Industries and Sectors Requiring This Testing

    The following industries and sectors require ASTM G123 Corrosion of Stainless Steel in Marine Environments testing:

  • Construction

  • Oil and gas

  • Aerospace

  • Automotive

  • Marine

    • Risk Factors and Safety Implications

    The risk factors associated with not performing this test include:

  • Reduced product lifespan

  • Increased maintenance costs

  • Compromised safety

    • Quality Assurance and Quality Control Aspects

    ASTM G123 Corrosion of Stainless Steel in Marine Environments testing is subject to quality assurance and quality control measures, including:

  • Calibration of equipment

  • Validation of procedures

  • Regular audits

    • Contribution to Product Safety and Reliability

    This test contributes significantly to product safety and reliability by ensuring that materials meet the required corrosion resistance standards.

    Competitive Advantages and Cost-Benefit Analysis

    Performing ASTM G123 Corrosion of Stainless Steel in Marine Environments testing provides several competitive advantages, including:

  • Improved product quality

  • Reduced maintenance costs

  • Enhanced customer satisfaction

    • The cost-benefit analysis of performing this test indicates that it is a worthwhile investment for companies operating in industries requiring stainless steel components.

    ASTM G123 Corrosion of Stainless Steel in Marine Environments testing involves the following steps:

    1. Sample Preparation: Samples are prepared according to ASTM G123-18.

    2. Testing Environment: The testing environment is controlled to simulate real-world exposure.

    3. Exposure Duration: Minimum of 1,000 hours

    4. Evaluation: Evaluation of corrosion resistance is performed after the exposure duration.

    Equipment and Materials

    The following equipment and materials are required for ASTM G123 Corrosion of Stainless Steel in Marine Environments testing:

  • Seawater or saltwater

  • Temperature control system

  • pH meter

  • Exposure chamber

    • Procedure

    The procedure for performing ASTM G123 Corrosion of Stainless Steel in Marine Environments testing involves the following steps:

    1. Preparation: Samples are prepared according to ASTM G123-18.

    2. Testing: Testing is performed under controlled conditions.

    3. Evaluation: Evaluation of corrosion resistance is performed after the exposure duration.

    The test conditions for ASTM G123 Corrosion of Stainless Steel in Marine Environments testing are specified as follows:

  • Test environment: Seawater or saltwater

  • Temperature: 25C 2C (77F 3.6F)

  • pH: 7.5 0.5

  • Exposure duration: Minimum of 1,000 hours

    • Conclusion

    ASTM G123 Corrosion of Stainless Steel in Marine Environments testing is a critical requirement for ensuring the durability and reliability of stainless steel components used in marine environments. This test contributes significantly to product safety and reliability by ensuring that materials meet the required corrosion resistance standards.

    By performing ASTM G123 Corrosion of Stainless Steel in Marine Environments testing, companies can ensure compliance with industry standards, reduce maintenance costs, and enhance customer satisfaction.

    Eurolabs Expertise

    Eurolab is a leading laboratory service provider with extensive expertise in ASTM G123 Corrosion of Stainless Steel in Marine Environments testing. Our experienced team ensures that all tests are performed to the highest standards, providing accurate and reliable results.

    Contact Us

    For more information about our ASTM G123 Corrosion of Stainless Steel in Marine Environments testing services, please contact us at insert contact details.

    We look forward to collaborating with you to ensure the quality and reliability of your stainless steel components.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers