EUROLAB
iso-11463-corrosion-testing-of-metals-by-potentiodynamic-polarization
Corrosion & Salt Spray Testing ASTM B117 Salt Spray (Fog) Testing for Corrosion ResistanceASTM B368 Cyclic Corrosion Testing for CoatingsASTM D1654 Evaluation of Painted or Coated Specimens Subjected to CorrosionASTM D3359 Adhesion Testing of Coatings (Cross-cut)ASTM D4541 Pull-Off Adhesion TestingASTM D610 Evaluation of Rusting on Painted Steel SurfacesASTM D610 Rust Grade RatingASTM D714 Blistering Evaluation on CoatingsASTM D714 Blistering Test for Paints and CoatingsASTM G1 Preparation of Metal Surfaces for Corrosion TestingASTM G101 Environmental Stress Cracking TestingASTM G109 Cathodic Disbondment TestingASTM G110 Corrosion Fatigue Crack GrowthASTM G123 Corrosion in Marine EnvironmentsASTM G123 Corrosion of Stainless Steel in Marine EnvironmentsASTM G129 Corrosion Testing in Chloride EnvironmentsASTM G142 Hydrogen Evolution MeasurementASTM G150 Electrochemical Noise MeasurementsASTM G170 Standard Practice for Testing Materials in CO2 EnvironmentsASTM G192 Evaluation of Corrosion Product FormationASTM G199 Corrosion Testing Under Cathodic ProtectionASTM G28 Laboratory Evaluation of the Corrosivity of SoilASTM G31 Immersion Corrosion TestingASTM G31 Laboratory Corrosion Testing of MetalsASTM G36 Hydrogen Embrittlement TestingASTM G36 Hydrogen Embrittlement TestsASTM G44 Cyclic Corrosion TestingASTM G46 Evaluation of Corrosion Under CoatingsASTM G46 Evaluation of Localized CorrosionASTM G49 Stress Corrosion Cracking Tests in MetalsASTM G5 Anodic Polarization TestingASTM G5 Potentiodynamic Polarization CurvesASTM G59 Electrochemical Impedance Spectroscopy (EIS)ASTM G61 Sulfide Stress Cracking TestingASTM G71 Preparation of Corrosion Testing SolutionsASTM G71 Preparation of Electrolytes for Corrosion TestingASTM G72 Hydrogen EmbrittlementASTM G78 Pitting Corrosion TestingASTM G85 Annex A Acidified Salt Spray (Fog) TestingASTM G85 Annex B Seawater Acidified TestASTM G85 Annex C Cyclic Acidified Salt SprayASTM G85 Annex D Seawater Spray TestASTM G85 Annex E Combined Salt Spray and SO2 ExposureASTM G85 Annex F Acidified Synthetic Seawater SprayASTM G85 Annex G Cyclic Prohesion TestASTM G85 Modified Salt Spray TestingASTM G94 Corrosion Testing of TitaniumASTM G95 Corrosion Fatigue TestingISO 11314 Stress Cracking TestingISO 11462 Electrolyte PreparationISO 11462 Preparation of Test SolutionsISO 11463 Anodic Polarization CurvesISO 11463 Potentiodynamic TestingISO 11960 Titanium Corrosion TestingISO 15156 Corrosion in Chloride EnvironmentsISO 15156 Corrosion Testing in CO2 EnvironmentsISO 15589-1 Cathodic Protection TestingISO 16701 Cyclic Corrosion TestingISO 16701 Cyclic Corrosion Testing of CoatingsISO 16773 Electrochemical Impedance Spectroscopy for CorrosionISO 17074 Hydrogen Gas EvolutionISO 17075 Soil Corrosion TestingISO 17475 Electrochemical Testing of CorrosionISO 17475 Immersion TestingISO 17864 Corrosion Rate MeasurementISO 17872 Pitting Corrosion ResistanceISO 17872 Pitting Corrosion TestingISO 17941 Electrochemical Noise AnalysisISO 20340 Corrosion Under Coating EvaluationISO 21809-2 Testing of Anti-corrosion CoatingsISO 2409 Paint Adhesion TestingISO 4624 Adhesion of CoatingsISO 4628-2 Blistering in CoatingsISO 4628-2 Blistering Test for CoatingsISO 4628-3 Rust EvaluationISO 4628-3 Rust Grade AssessmentISO 4628-8 Assessment of Filiform CorrosionISO 4628-8 Evaluation of Degradation of Coatings – Filiform CorrosionISO 6988 Neutral Salt Spray TestISO 7539-2 Stress Corrosion CrackingISO 7539-2 Stress Corrosion Cracking TestingISO 7539-4 Hydrogen Embrittlement TestingISO 7539-5 Slow Strain Rate TestingISO 7539-6 Sulfide Stress CrackingISO 7539-7 Crack Growth TestingISO 7539-8 Corrosion FatigueISO 7539-9 Testing of Stainless Steel CorrosionISO 8407 Surface Preparation for Corrosion TestingISO 9223 Corrosion Rates in Atmospheric EnvironmentsISO 9227 Annex B for Modified Salt SprayISO 9227 Annex C Cyclic Salt SprayISO 9227 Annex D Seawater SprayISO 9227 Annex E Combined Corrosion TestingISO 9227 Annex F Acidified Seawater SprayISO 9227 Annex G Prohesion Corrosion TestingISO 9227 Annexes for Modified Salt SprayISO 9227 Corrosion Tests in Artificial Atmospheres – Salt Spray Tests

Comprehensive Guide to ISO 11463 Corrosion Testing of Metals by Potentiodynamic Polarization: A Laboratory Testing Service Provided by Eurolab

ISO 11463 is a widely recognized international standard for corrosion testing of metals by potentiodynamic polarization. This standard provides guidelines and procedures for conducting laboratory tests to evaluate the corrosion resistance of metal samples in various environments.

Legal and Regulatory Framework Surrounding ISO 11463 Corrosion Testing

The legal and regulatory framework surrounding ISO 11463 corrosion testing is governed by international and national standards, including:

  • International Organization for Standardization (ISO) - ISO 11463:2016

  • American Society for Testing and Materials (ASTM) - ASTM G102-89

  • European Committee for Electrotechnical Standardization (CENELEC) - EN ISO 11463:2005

  • Turkish Standards Institution (TSE) - TS EN ISO 11463

    • These standards provide a framework for conducting laboratory tests to evaluate the corrosion resistance of metal samples in various environments.

    International and National Standards That Apply to This Specific Laboratory Test

    The following international and national standards apply to this specific laboratory test:

  • ISO 11463:2016 Corrosion testing - Potentiodynamic polarization

  • ASTM G102-89 Standard Practice for Calculation of Corrosion Rates and Related Information from the Results of Available Index Methods

  • EN ISO 11463:2005 Corrosion tests in a controlled laboratory environment - Potentiodynamic polarization

    • These standards provide guidelines and procedures for conducting laboratory tests to evaluate the corrosion resistance of metal samples.

    Standard Development Organizations and Their Role

    Standard development organizations play a crucial role in developing and updating international and national standards. Some of the key standard development organizations include:

  • International Organization for Standardization (ISO)

  • American Society for Testing and Materials (ASTM)

  • European Committee for Electrotechnical Standardization (CENELEC)

    • These organizations work together to develop and update standards that reflect changes in technology, regulations, and industry practices.

    How Standards Evolve and Get Updated

    Standards evolve and get updated through a continuous process of review and revision. This process involves:

  • Identifying areas for improvement

  • Gathering input from stakeholders

  • Developing and testing new standards

  • Reviewing and revising existing standards

    • This ongoing process ensures that standards remain relevant and effective in supporting industry practices.

    Specific Standard Numbers and Their Scope

    The following standard numbers are specific to this laboratory test:

  • ISO 11463:2016 Corrosion testing - Potentiodynamic polarization

  • ASTM G102-89 Standard Practice for Calculation of Corrosion Rates and Related Information from the Results of Available Index Methods

  • EN ISO 11463:2005 Corrosion tests in a controlled laboratory environment - Potentiodynamic polarization

    • These standards provide guidelines and procedures for conducting laboratory tests to evaluate the corrosion resistance of metal samples.

    Standard Compliance Requirements for Different Industries

    Industry-specific compliance requirements vary depending on factors such as:

  • Regulatory requirements

  • Industry practices

  • Customer specifications

    • Compliance with ISO 11463 corrosion testing requires adherence to specific standard numbers, guidelines, and procedures.

    Why This Specific Test is Needed and Required

    This test is needed and required for several reasons:

  • To evaluate the corrosion resistance of metal samples

  • To ensure compliance with regulatory requirements

  • To support industry practices

  • To meet customer specifications

    • Conducting this test ensures that metal samples meet specified corrosion resistance criteria.

    Business and Technical Reasons for Conducting ISO 11463 Corrosion Testing

    The business and technical reasons for conducting ISO 11463 corrosion testing include:

  • Ensuring product quality and reliability

  • Supporting regulatory compliance

  • Enhancing customer satisfaction

  • Improving competitiveness in the market

    • Conducting this test provides valuable information to support business decisions.

    Consequences of Not Performing This Test

    Failure to perform this test can result in:

  • Non-compliance with regulatory requirements

  • Reduced product quality and reliability

  • Decreased customer satisfaction

  • Increased costs due to rework or replacement

    • Conducting this test ensures that metal samples meet specified corrosion resistance criteria.

    Industries and Sectors That Require This Testing

    The following industries and sectors require this testing:

  • Aerospace

  • Automotive

  • Chemical processing

  • Construction

  • Electrical

  • Marine

  • Oil and gas

  • Power generation

    • Conducting this test supports industry practices and regulatory requirements.

    Risk Factors and Safety Implications

    The risk factors associated with corrosion include:

  • Material failure

  • Equipment damage

  • Environmental impact

  • Economic losses

    • Conducting this test identifies potential risks and ensures that metal samples meet specified corrosion resistance criteria.

    Why Choose Eurolab for ISO 11463 Corrosion Testing?

    Eurolab offers a comprehensive laboratory testing service for ISO 11463 corrosion testing. Our experienced technicians and state-of-the-art equipment ensure accurate and reliable results.

    What Services Does Eurolab Offer?

    Eurolab provides the following services:

  • Sample preparation

  • Test setup and execution

  • Data analysis and reporting

  • Quality control and assurance

    • Our comprehensive service ensures that metal samples meet specified corrosion resistance criteria.

    Benefits of Working with Eurolab

    Working with Eurolab offers several benefits, including:

  • Convenience and flexibility

  • Expertise and reliability

  • Cost-effectiveness

  • Timely delivery of results

    • Our team is committed to providing excellent service and ensuring that customers meet regulatory requirements.

    In conclusion, ISO 11463 corrosion testing is an essential laboratory test for evaluating the corrosion resistance of metal samples. This standard provides guidelines and procedures for conducting laboratory tests in a controlled environment.

    Eurolab offers a comprehensive laboratory testing service for ISO 11463 corrosion testing, including sample preparation, test setup and execution, data analysis and reporting, and quality control and assurance.

    By working with Eurolab, customers can ensure that metal samples meet specified corrosion resistance criteria, supporting regulatory compliance, industry practices, and customer specifications.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers