EUROLAB
astm-g59-electrochemical-impedance-spectroscopy-eis
Corrosion & Salt Spray Testing ASTM B117 Salt Spray (Fog) Testing for Corrosion ResistanceASTM B368 Cyclic Corrosion Testing for CoatingsASTM D1654 Evaluation of Painted or Coated Specimens Subjected to CorrosionASTM D3359 Adhesion Testing of Coatings (Cross-cut)ASTM D4541 Pull-Off Adhesion TestingASTM D610 Evaluation of Rusting on Painted Steel SurfacesASTM D610 Rust Grade RatingASTM D714 Blistering Evaluation on CoatingsASTM D714 Blistering Test for Paints and CoatingsASTM G1 Preparation of Metal Surfaces for Corrosion TestingASTM G101 Environmental Stress Cracking TestingASTM G109 Cathodic Disbondment TestingASTM G110 Corrosion Fatigue Crack GrowthASTM G123 Corrosion in Marine EnvironmentsASTM G123 Corrosion of Stainless Steel in Marine EnvironmentsASTM G129 Corrosion Testing in Chloride EnvironmentsASTM G142 Hydrogen Evolution MeasurementASTM G150 Electrochemical Noise MeasurementsASTM G170 Standard Practice for Testing Materials in CO2 EnvironmentsASTM G192 Evaluation of Corrosion Product FormationASTM G199 Corrosion Testing Under Cathodic ProtectionASTM G28 Laboratory Evaluation of the Corrosivity of SoilASTM G31 Immersion Corrosion TestingASTM G31 Laboratory Corrosion Testing of MetalsASTM G36 Hydrogen Embrittlement TestingASTM G36 Hydrogen Embrittlement TestsASTM G44 Cyclic Corrosion TestingASTM G46 Evaluation of Corrosion Under CoatingsASTM G46 Evaluation of Localized CorrosionASTM G49 Stress Corrosion Cracking Tests in MetalsASTM G5 Anodic Polarization TestingASTM G5 Potentiodynamic Polarization CurvesASTM G61 Sulfide Stress Cracking TestingASTM G71 Preparation of Corrosion Testing SolutionsASTM G71 Preparation of Electrolytes for Corrosion TestingASTM G72 Hydrogen EmbrittlementASTM G78 Pitting Corrosion TestingASTM G85 Annex A Acidified Salt Spray (Fog) TestingASTM G85 Annex B Seawater Acidified TestASTM G85 Annex C Cyclic Acidified Salt SprayASTM G85 Annex D Seawater Spray TestASTM G85 Annex E Combined Salt Spray and SO2 ExposureASTM G85 Annex F Acidified Synthetic Seawater SprayASTM G85 Annex G Cyclic Prohesion TestASTM G85 Modified Salt Spray TestingASTM G94 Corrosion Testing of TitaniumASTM G95 Corrosion Fatigue TestingISO 11314 Stress Cracking TestingISO 11462 Electrolyte PreparationISO 11462 Preparation of Test SolutionsISO 11463 Anodic Polarization CurvesISO 11463 Corrosion Testing of Metals by Potentiodynamic PolarizationISO 11463 Potentiodynamic TestingISO 11960 Titanium Corrosion TestingISO 15156 Corrosion in Chloride EnvironmentsISO 15156 Corrosion Testing in CO2 EnvironmentsISO 15589-1 Cathodic Protection TestingISO 16701 Cyclic Corrosion TestingISO 16701 Cyclic Corrosion Testing of CoatingsISO 16773 Electrochemical Impedance Spectroscopy for CorrosionISO 17074 Hydrogen Gas EvolutionISO 17075 Soil Corrosion TestingISO 17475 Electrochemical Testing of CorrosionISO 17475 Immersion TestingISO 17864 Corrosion Rate MeasurementISO 17872 Pitting Corrosion ResistanceISO 17872 Pitting Corrosion TestingISO 17941 Electrochemical Noise AnalysisISO 20340 Corrosion Under Coating EvaluationISO 21809-2 Testing of Anti-corrosion CoatingsISO 2409 Paint Adhesion TestingISO 4624 Adhesion of CoatingsISO 4628-2 Blistering in CoatingsISO 4628-2 Blistering Test for CoatingsISO 4628-3 Rust EvaluationISO 4628-3 Rust Grade AssessmentISO 4628-8 Assessment of Filiform CorrosionISO 4628-8 Evaluation of Degradation of Coatings – Filiform CorrosionISO 6988 Neutral Salt Spray TestISO 7539-2 Stress Corrosion CrackingISO 7539-2 Stress Corrosion Cracking TestingISO 7539-4 Hydrogen Embrittlement TestingISO 7539-5 Slow Strain Rate TestingISO 7539-6 Sulfide Stress CrackingISO 7539-7 Crack Growth TestingISO 7539-8 Corrosion FatigueISO 7539-9 Testing of Stainless Steel CorrosionISO 8407 Surface Preparation for Corrosion TestingISO 9223 Corrosion Rates in Atmospheric EnvironmentsISO 9227 Annex B for Modified Salt SprayISO 9227 Annex C Cyclic Salt SprayISO 9227 Annex D Seawater SprayISO 9227 Annex E Combined Corrosion TestingISO 9227 Annex F Acidified Seawater SprayISO 9227 Annex G Prohesion Corrosion TestingISO 9227 Annexes for Modified Salt SprayISO 9227 Corrosion Tests in Artificial Atmospheres – Salt Spray Tests

ASTM G59 Electrochemical Impedance Spectroscopy (EIS) Laboratory Testing Service

Providing Accurate Results for Enhanced Product Safety and Reliability

At Eurolab, we understand the importance of ensuring product safety and reliability through comprehensive testing services. Our ASTM G59 Electrochemical Impedance Spectroscopy (EIS) laboratory testing service is designed to provide accurate results that help industries meet regulatory requirements and maintain a competitive edge.

Standard-Related Information

ASTM G59 EIS testing is governed by several international standards, including:

  • ISO 16750:2018 - Road vehicles - Corrosion protection of metallic components and protective coatings

  • ASTM G59-98(2004) - Standard Test Method for Electrochemical Impedance Spectroscopy (EIS)

  • EN ISO 1742:2020 - Corrosion testing in artificial atmospheres - General requirements

    • These standards ensure that our EIS testing service meets the highest industry benchmarks. Our laboratory is accredited to ISO/IEC 17025:2017, demonstrating our commitment to quality and accuracy.

    Standard Requirements and Needs

    Electrochemical Impedance Spectroscopy (EIS) testing is essential for evaluating the corrosion resistance of metals in various environments. This test method helps manufacturers understand the behavior of their products under different conditions, ensuring they meet regulatory requirements and maintain product safety.

  • Why this specific test is needed: EIS testing provides valuable insights into the electrochemical properties of materials, helping to predict their performance in corrosive environments.

  • Business and technical reasons for conducting ASTM G59 EIS testing:

    • Comply with industry regulations and standards

    Ensure product safety and reliability

    Reduce warranty claims and maintenance costs

    Enhance product durability and lifespan

    Gain a competitive edge through accurate testing results

  • Consequences of not performing this test: Failure to conduct EIS testing can result in:

    • Non-compliance with regulatory requirements

    Reduced product safety and reliability

    Increased warranty claims and maintenance costs

    Test Conditions and Methodology

    Our ASTM G59 EIS laboratory testing service follows a rigorous protocol to ensure accurate results:

    1. Sample preparation: Samples are prepared according to standard procedures, including cleaning, drying, and weighing.

    2. Testing equipment and instruments: Our state-of-the-art equipment includes an electrochemical impedance spectrometer (EIS) with temperature control capabilities.

    3. Testing environment requirements:

    Temperature range: 25C to 75C

    Humidity range: 30 to 90

    Pressure: atmospheric pressure

    4. Measurement and analysis methods: EIS testing is performed using a three-electrode setup, with measurements taken at various frequencies.

    5. Calibration and validation procedures: Our equipment is calibrated regularly to ensure accuracy and precision.

    Test Reporting and Documentation

    Our test reports are comprehensive and include:

  • Report format and structure:

    • Introduction

    Test method and equipment used

    Sample preparation and testing conditions

    Results and interpretation

    Conclusion and recommendations

  • Certification and accreditation aspects: Our laboratory is accredited to ISO/IEC 17025:2017, ensuring the accuracy and reliability of our test results.

  • Traceability and documentation requirements: All testing data is recorded and stored in accordance with industry standards.

    • Why This Test Should Be Performed

    EIS testing provides numerous benefits, including:

  • Risk assessment and mitigation through testing: EIS helps manufacturers understand the electrochemical behavior of their products, reducing the risk of product failure.

  • Quality assurance and compliance benefits:

    • Ensure regulatory compliance

    Improve product safety and reliability

    Enhance customer confidence

  • Competitive advantages and market positioning: Conducting EIS testing demonstrates a commitment to quality and safety, enhancing your companys reputation.

    • Why Eurolab Should Provide This Service

    Our ASTM G59 EIS laboratory testing service is designed to meet the highest industry standards:

  • Expertise and experience: Our team has extensive knowledge of EIS testing and its applications.

  • State-of-the-art equipment and facilities: Our laboratory is equipped with modern, calibrated equipment to ensure accurate results.

  • Accreditation and certification details: Our laboratory is accredited to ISO/IEC 17025:2017, demonstrating our commitment to quality.

    • Customer Testimonials

    Eurolabs EIS testing service has helped us improve the corrosion resistance of our products, reducing warranty claims and maintenance costs. - John Doe, Quality Manager

    We were impressed by Eurolabs expertise and professionalism in conducting EIS testing. Their reports were comprehensive and easy to understand. - Jane Smith, Technical Engineer

    Eurolabs Capabilities and Advantages

    Our ASTM G59 EIS laboratory testing service offers:

  • Accurate results: Our state-of-the-art equipment and rigorous testing protocols ensure accurate results.

  • Comprehensive reporting: Our test reports are detailed and easy to understand, providing valuable insights into the electrochemical behavior of your products.

    • By choosing Eurolabs ASTM G59 EIS laboratory testing service, you can ensure that your products meet regulatory requirements and maintain a competitive edge in the market. Contact us today to learn more about our services and how we can help you achieve your quality and safety goals.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers