EUROLAB
astm-g71-preparation-of-electrolytes-for-corrosion-testing
Corrosion & Salt Spray Testing ASTM B117 Salt Spray (Fog) Testing for Corrosion ResistanceASTM B368 Cyclic Corrosion Testing for CoatingsASTM D1654 Evaluation of Painted or Coated Specimens Subjected to CorrosionASTM D3359 Adhesion Testing of Coatings (Cross-cut)ASTM D4541 Pull-Off Adhesion TestingASTM D610 Evaluation of Rusting on Painted Steel SurfacesASTM D610 Rust Grade RatingASTM D714 Blistering Evaluation on CoatingsASTM D714 Blistering Test for Paints and CoatingsASTM G1 Preparation of Metal Surfaces for Corrosion TestingASTM G101 Environmental Stress Cracking TestingASTM G109 Cathodic Disbondment TestingASTM G110 Corrosion Fatigue Crack GrowthASTM G123 Corrosion in Marine EnvironmentsASTM G123 Corrosion of Stainless Steel in Marine EnvironmentsASTM G129 Corrosion Testing in Chloride EnvironmentsASTM G142 Hydrogen Evolution MeasurementASTM G150 Electrochemical Noise MeasurementsASTM G170 Standard Practice for Testing Materials in CO2 EnvironmentsASTM G192 Evaluation of Corrosion Product FormationASTM G199 Corrosion Testing Under Cathodic ProtectionASTM G28 Laboratory Evaluation of the Corrosivity of SoilASTM G31 Immersion Corrosion TestingASTM G31 Laboratory Corrosion Testing of MetalsASTM G36 Hydrogen Embrittlement TestingASTM G36 Hydrogen Embrittlement TestsASTM G44 Cyclic Corrosion TestingASTM G46 Evaluation of Corrosion Under CoatingsASTM G46 Evaluation of Localized CorrosionASTM G49 Stress Corrosion Cracking Tests in MetalsASTM G5 Anodic Polarization TestingASTM G5 Potentiodynamic Polarization CurvesASTM G59 Electrochemical Impedance Spectroscopy (EIS)ASTM G61 Sulfide Stress Cracking TestingASTM G71 Preparation of Corrosion Testing SolutionsASTM G72 Hydrogen EmbrittlementASTM G78 Pitting Corrosion TestingASTM G85 Annex A Acidified Salt Spray (Fog) TestingASTM G85 Annex B Seawater Acidified TestASTM G85 Annex C Cyclic Acidified Salt SprayASTM G85 Annex D Seawater Spray TestASTM G85 Annex E Combined Salt Spray and SO2 ExposureASTM G85 Annex F Acidified Synthetic Seawater SprayASTM G85 Annex G Cyclic Prohesion TestASTM G85 Modified Salt Spray TestingASTM G94 Corrosion Testing of TitaniumASTM G95 Corrosion Fatigue TestingISO 11314 Stress Cracking TestingISO 11462 Electrolyte PreparationISO 11462 Preparation of Test SolutionsISO 11463 Anodic Polarization CurvesISO 11463 Corrosion Testing of Metals by Potentiodynamic PolarizationISO 11463 Potentiodynamic TestingISO 11960 Titanium Corrosion TestingISO 15156 Corrosion in Chloride EnvironmentsISO 15156 Corrosion Testing in CO2 EnvironmentsISO 15589-1 Cathodic Protection TestingISO 16701 Cyclic Corrosion TestingISO 16701 Cyclic Corrosion Testing of CoatingsISO 16773 Electrochemical Impedance Spectroscopy for CorrosionISO 17074 Hydrogen Gas EvolutionISO 17075 Soil Corrosion TestingISO 17475 Electrochemical Testing of CorrosionISO 17475 Immersion TestingISO 17864 Corrosion Rate MeasurementISO 17872 Pitting Corrosion ResistanceISO 17872 Pitting Corrosion TestingISO 17941 Electrochemical Noise AnalysisISO 20340 Corrosion Under Coating EvaluationISO 21809-2 Testing of Anti-corrosion CoatingsISO 2409 Paint Adhesion TestingISO 4624 Adhesion of CoatingsISO 4628-2 Blistering in CoatingsISO 4628-2 Blistering Test for CoatingsISO 4628-3 Rust EvaluationISO 4628-3 Rust Grade AssessmentISO 4628-8 Assessment of Filiform CorrosionISO 4628-8 Evaluation of Degradation of Coatings – Filiform CorrosionISO 6988 Neutral Salt Spray TestISO 7539-2 Stress Corrosion CrackingISO 7539-2 Stress Corrosion Cracking TestingISO 7539-4 Hydrogen Embrittlement TestingISO 7539-5 Slow Strain Rate TestingISO 7539-6 Sulfide Stress CrackingISO 7539-7 Crack Growth TestingISO 7539-8 Corrosion FatigueISO 7539-9 Testing of Stainless Steel CorrosionISO 8407 Surface Preparation for Corrosion TestingISO 9223 Corrosion Rates in Atmospheric EnvironmentsISO 9227 Annex B for Modified Salt SprayISO 9227 Annex C Cyclic Salt SprayISO 9227 Annex D Seawater SprayISO 9227 Annex E Combined Corrosion TestingISO 9227 Annex F Acidified Seawater SprayISO 9227 Annex G Prohesion Corrosion TestingISO 9227 Annexes for Modified Salt SprayISO 9227 Corrosion Tests in Artificial Atmospheres – Salt Spray Tests

Comprehensive Guide to ASTM G71 Preparation of Electrolytes for Corrosion Testing Laboratory Testing Service

Standard-Related Information

The ASTM G71 Preparation of Electrolytes for Corrosion Testing laboratory testing service is governed by the American Society for Testing and Materials (ASTM) standard, which specifies the requirements for the preparation of electrolytes used in corrosion testing. This standard is widely recognized and accepted globally, with equivalent standards from other organizations such as ISO, EN, and TSE.

ISO 17025:2017

The International Organization for Standardization (ISO) has published the ISO 17025:2017 standard, which specifies the general requirements for the competence of testing and calibration laboratories. This standard is widely adopted globally and provides a framework for laboratories to demonstrate their competence in testing and calibration.

ASTM G71-15

The ASTM G71-15 standard is specifically related to the preparation of electrolytes for corrosion testing. This standard outlines the requirements for the preparation, handling, storage, and use of electrolytes in corrosion testing. It also provides guidance on the selection of suitable materials and equipment for the preparation of electrolytes.

EN 12496:2015

The European Standard (EN) EN 12496:2015 specifies the requirements for the preparation of solutions used in electrochemical corrosion testing. This standard is equivalent to ASTM G71-15 and provides similar requirements for the preparation, handling, storage, and use of electrolytes.

TSE 1483:2020

The Turkish Standard (TSE) TSE 1483:2020 specifies the requirements for the preparation of solutions used in electrochemical corrosion testing. This standard is equivalent to ASTM G71-15 and EN 12496:2015, providing similar requirements for the preparation, handling, storage, and use of electrolytes.

Standard Development Organizations

The development of standards such as ASTM G71-15, ISO 17025:2017, EN 12496:2015, and TSE 1483:2020 is carried out by standard development organizations. These organizations include:

  • American Society for Testing and Materials (ASTM)

  • International Organization for Standardization (ISO)

  • European Committee for Standardization (CEN)

  • Turkish Standards Institution (TSE)

    • Standard Evolution

    Standards such as ASTM G71-15, ISO 17025:2017, EN 12496:2015, and TSE 1483:2020 are regularly reviewed and updated to reflect changes in technology, new research findings, and industry requirements. This ensures that standards remain relevant and effective.

    Standard Compliance

    Compliance with standards such as ASTM G71-15, ISO 17025:2017, EN 12496:2015, and TSE 1483:2020 is mandatory for laboratories providing testing services. Non-compliance can result in loss of accreditation, certification, or even business reputation.

    Industries Requiring Testing

    The ASTM G71 Preparation of Electrolytes for Corrosion Testing laboratory testing service is required by various industries, including:

  • Oil and gas

  • Aerospace

  • Automotive

  • Chemicals

  • Food processing

    • These industries require accurate and reliable results to ensure the safety and quality of their products.

    Risk Factors

    Non-compliance with standards such as ASTM G71-15, ISO 17025:2017, EN 12496:2015, and TSE 1483:2020 can result in significant risks, including:

  • Loss of accreditation or certification

  • Business reputation damage

  • Product recalls or liability claims

  • Environmental damage

    • Quality Assurance

    Compliance with standards such as ASTM G71-15, ISO 17025:2017, EN 12496:2015, and TSE 1483:2020 ensures that the laboratory testing service meets quality assurance requirements. This includes:

  • Competent personnel

  • Suitable equipment and facilities

  • Validated methods and procedures

  • Quality control measures

    • Contribution to Product Safety

    The ASTM G71 Preparation of Electrolytes for Corrosion Testing laboratory testing service contributes significantly to product safety and reliability by ensuring that electrolytes are prepared accurately and reliably.

    Competitive Advantages

    Compliance with standards such as ASTM G71-15, ISO 17025:2017, EN 12496:2015, and TSE 1483:2020 provides significant competitive advantages, including:

  • Accreditation and certification

  • Improved customer confidence and trust

  • Increased market access and trade facilitation

    • Cost Savings

    Compliance with standards such as ASTM G71-15, ISO 17025:2017, EN 12496:2015, and TSE 1483:2020 can result in cost savings by reducing the risk of product recalls or liability claims.

    Turnaround Time and Efficiency Advantages

    Compliance with standards such as ASTM G71-15, ISO 17025:2017, EN 12496:2015, and TSE 1483:2020 ensures that laboratory testing services are delivered efficiently and effectively, resulting in shorter turnaround times.

    Conclusion

    The ASTM G71 Preparation of Electrolytes for Corrosion Testing laboratory testing service is governed by a range of standards, including ASTM G71-15, ISO 17025:2017, EN 12496:2015, and TSE 1483:2020. Compliance with these standards is mandatory to ensure the safety and quality of products, as well as to maintain accreditation and certification.

    Standards for Preparation of Electrolytes

    Standard Title

    --- ---

    ASTM G71-15 Standard Practice for Preparing, Evaluating and Using Preservatives in Coal-Tar-Based Paints

    ISO 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories

    EN 12496:2015 Corrosion testing - Electrochemical corrosion testing

    TSE 1483:2020 Solutions used in electrochemical corrosion testing

    Standard Development Organizations

  • American Society for Testing and Materials (ASTM)

  • International Organization for Standardization (ISO)

  • European Committee for Standardization (CEN)

  • Turkish Standards Institution (TSE)

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers