EUROLAB
ansi-s120-measurement-of-sound-exposure-levels
Noise and Vibration Measurement ANSI S1.1 Acoustical TerminologyANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Analog FiltersANSI S1.13 Sound Level Calibrator TestingANSI S1.25 Measurement of Sound in Air Under Reverberant ConditionsANSI S1.4 Sound Level Meter Testing and CalibrationANSI S1.43 Specification for Sound Level MetersANSI S12.10 Measurement of Noise Emitted by Industrial EquipmentANSI S12.18 Acoustic Noise Measurement ProceduresANSI S12.19 Measurement of Road Traffic NoiseANSI S12.2 Criteria for Evaluating Community NoiseANSI S12.42 Sound Source CharacterizationANSI S12.51 Sound Level Meter CalibrationANSI S12.9 Measurement of Environmental Noise - Part 2: Noise AssessmentANSI S3.26 Measurement of Room Acoustic ParametersANSI S3.34 Measurement of Impulse NoiseIEC 60068-2-27 Environmental Testing - Shock and BumpIEC 60068-2-27 Shock TestingIEC 60068-2-6 Environmental Testing - Sinusoidal VibrationIEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance)IEC 60268-1 Sound System Equipment - Part 1: General RequirementsIEC 60268-16 Sound System Equipment - Objective Rating of Speech IntelligibilityIEC 60268-3 Electroacoustics - LoudspeakersIEC 60268-5 Electroacoustics - Sound Level Meters - Performance TestsIEC 60268-7 Sound Level Meters - Electromechanical PerformanceIEC 60572 Sound Level Meters – Performance SpecificationsIEC 61094-2 Measurement Microphones - Part 2: Calibration MethodsIEC 61094-4 Measurement Microphones - Part 4: Technical SpecificationsIEC 61260-1 Electroacoustics - Octave-Band and Fractional-Octave-Band FiltersIEC 61672-1 Electroacoustics - Sound Level Meter SpecificationsIEC 61672-2 Electroacoustics - Sound Level Meter - Part 2: Pattern Evaluation TestsIEC 61672-3 Electroacoustics - Sound Level Meters - Part 3: Periodic TestsISO 10816-1 Evaluation of Machine Vibration - General GuidelinesISO 10816-3 Evaluation of Machine Vibration by Measurements on Non-Rotating PartsISO 10816-4 Evaluation of Machine Vibration by Measurements on Rotating ShaftsISO 11201 Measurement of Noise Emitted by Accelerating Road VehiclesISO 11202 Measurement of Noise Emitted by Stationary Road VehiclesISO 11203 Determination of Noise Emission in the EnvironmentISO 140 Noise Control - Measurement of Noise EmissionISO 15666 Assessment of Noise Annoyance in CommunitiesISO 16063-11 Vibration Calibration Using Primary Vibration StandardsISO 16063-2 Vibration Calibration Using Primary Vibration StandardsISO 16063-21 Vibration Calibration Using Laser Doppler VibrometryISO 16063-21 Vibration Calibration Using Laser VibrometersISO 16063-31 Vibration Calibration Using Reference AccelerometersISO 16063-41 Vibration Calibration of Seismic SensorsISO 16063-5 Vibration Calibration Using Electro-dynamic ExcitersISO 17025 Accredited Environmental Noise Measurement ServicesISO 1996-1 Determination of Environmental Noise LevelsISO 226 Equal-Loudness-Level ContoursISO 2631-1 Evaluation of Human Exposure to Whole-Body VibrationISO 2631-2 Evaluation of Human Exposure to Whole-Body Vibration in VehiclesISO 2631-5 Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body VibrationISO 266 Acoustics - Preferred Frequencies for Spectral AnalysisISO 2954 Electroacoustics - Measurement MicrophonesISO 4866 Mechanical Vibration and Shock – Vibration Measuring InstrumentsISO 5349 Measurement of Human Exposure to Hand-Transmitted VibrationISO 5349-2 Measurement of Hand-Transmitted Vibration - Practical GuidanceISO 6954 Guidelines for the Measurement and Assessment of Vibration in BuildingsISO 8041 Measurement of Human Exposure to Mechanical Vibration and ShockISO 8041-1 Human Exposure to Vibration - Measurement and EvaluationISO 9612 Determination of Occupational Noise ExposureISO 9613-1 Attenuation of Sound During Propagation Outdoors - Calculation MethodsISO 9613-2 Attenuation of Sound During Propagation OutdoorsISO 9614-1 Determination of Sound Power Levels Using Sound Intensity

ANSI S1.20 Measurement of Sound Exposure Levels Laboratory Testing Service: A Comprehensive Guide

Standard-Related Information

The American National Standards Institute (ANSI) standard for the measurement of sound exposure levels, ANSI S1.20, is a critical requirement for various industries worldwide. This standard ensures that sound levels are measured accurately and consistently to prevent hearing damage and ensure product safety.

The ISO 9612:2013 standard, which is equivalent to ANSI S1.20, provides guidelines for the measurement of noise at workplaces. It specifies the requirements for instruments, procedures, and calibration for measuring sound exposure levels. The European Standard EN 16152:2008 also covers similar requirements.

Standard Development Organizations

The International Organization for Standardization (ISO) is responsible for developing and maintaining international standards, including ISO 9612. The American Society for Testing and Materials (ASTM) plays a significant role in developing and publishing standards related to sound measurement. In Europe, the European Committee for Electrotechnical Standardization (CENELEC) develops and maintains European Standards, such as EN 16152.

Standard Compliance Requirements

Various industries require compliance with ANSI S1.20 or equivalent standards:

  • Construction: Sound exposure levels are critical in construction to prevent hearing damage among workers.

  • Aerospace: Accurate sound measurement is necessary for aircraft and spacecraft design.

  • Automotive: Manufacturers must ensure that vehicles meet noise regulations.

  • Industrial: Factory operators must control noise levels to protect employees.

    • Standard Requirements and Needs

    The ANSI S1.20 standard is essential for ensuring product safety and preventing hearing damage. Industries requiring this testing often face significant consequences if they fail to comply:

  • Business Risks: Non-compliance can lead to fines, penalties, and loss of business.

  • Technical Risks: Inaccurate sound measurement can compromise product performance and reliability.

    • Test Conditions and Methodology

    The ANSI S1.20 testing procedure involves the following steps:

    1. Equipment Calibration: Instruments are calibrated according to ISO 9612 or equivalent standards.

    2. Sample Preparation: Test samples are prepared to ensure accurate representation of sound exposure levels.

    3. Testing Environment: A controlled environment is set up to minimize external influences on sound measurement.

    4. Measurement and Analysis: Sound exposure levels are measured, analyzed, and recorded using specialized software.

    Test Reporting and Documentation

    Eurolab provides detailed reports for ANSI S1.20 testing services:

  • Report Format: Reports adhere to industry-standard formats, such as ISO/IEC 17025.

  • Certification: Test results are certified by qualified personnel.

  • Traceability: Results are linked to calibration certificates and other documentation.

    • Why This Test Should Be Performed

    ANSI S1.20 testing provides numerous benefits:

  • Risk Assessment and Mitigation: Accurate sound measurement helps identify potential risks and prevent hearing damage.

  • Quality Assurance: Testing ensures product safety, reliability, and performance.

  • Compliance: Meeting regulatory requirements reduces business risks and penalties.

    • Why Eurolab Should Provide This Service

    Eurolab is the ideal choice for ANSI S1.20 testing due to its:

  • Expertise: Experienced personnel ensure accurate testing results.

  • State-of-the-Art Equipment: Latest technology guarantees precise sound measurement.

  • Accreditation and Certification: Testing adheres to industry standards, ensuring certification and compliance.

    • Additional Requirements

    Eurolabs comprehensive services include:

  • Technical Support: Consultation on test requirements and procedures

  • Turnaround Time: Rapid testing turnaround for time-sensitive projects

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers