EUROLAB
iec-61260-1-electroacoustics-octave-band-and-fractional-octave-band-filters
Noise and Vibration Measurement ANSI S1.1 Acoustical TerminologyANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Analog FiltersANSI S1.13 Sound Level Calibrator TestingANSI S1.20 Measurement of Sound Exposure LevelsANSI S1.25 Measurement of Sound in Air Under Reverberant ConditionsANSI S1.4 Sound Level Meter Testing and CalibrationANSI S1.43 Specification for Sound Level MetersANSI S12.10 Measurement of Noise Emitted by Industrial EquipmentANSI S12.18 Acoustic Noise Measurement ProceduresANSI S12.19 Measurement of Road Traffic NoiseANSI S12.2 Criteria for Evaluating Community NoiseANSI S12.42 Sound Source CharacterizationANSI S12.51 Sound Level Meter CalibrationANSI S12.9 Measurement of Environmental Noise - Part 2: Noise AssessmentANSI S3.26 Measurement of Room Acoustic ParametersANSI S3.34 Measurement of Impulse NoiseIEC 60068-2-27 Environmental Testing - Shock and BumpIEC 60068-2-27 Shock TestingIEC 60068-2-6 Environmental Testing - Sinusoidal VibrationIEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance)IEC 60268-1 Sound System Equipment - Part 1: General RequirementsIEC 60268-16 Sound System Equipment - Objective Rating of Speech IntelligibilityIEC 60268-3 Electroacoustics - LoudspeakersIEC 60268-5 Electroacoustics - Sound Level Meters - Performance TestsIEC 60268-7 Sound Level Meters - Electromechanical PerformanceIEC 60572 Sound Level Meters – Performance SpecificationsIEC 61094-2 Measurement Microphones - Part 2: Calibration MethodsIEC 61094-4 Measurement Microphones - Part 4: Technical SpecificationsIEC 61672-1 Electroacoustics - Sound Level Meter SpecificationsIEC 61672-2 Electroacoustics - Sound Level Meter - Part 2: Pattern Evaluation TestsIEC 61672-3 Electroacoustics - Sound Level Meters - Part 3: Periodic TestsISO 10816-1 Evaluation of Machine Vibration - General GuidelinesISO 10816-3 Evaluation of Machine Vibration by Measurements on Non-Rotating PartsISO 10816-4 Evaluation of Machine Vibration by Measurements on Rotating ShaftsISO 11201 Measurement of Noise Emitted by Accelerating Road VehiclesISO 11202 Measurement of Noise Emitted by Stationary Road VehiclesISO 11203 Determination of Noise Emission in the EnvironmentISO 140 Noise Control - Measurement of Noise EmissionISO 15666 Assessment of Noise Annoyance in CommunitiesISO 16063-11 Vibration Calibration Using Primary Vibration StandardsISO 16063-2 Vibration Calibration Using Primary Vibration StandardsISO 16063-21 Vibration Calibration Using Laser Doppler VibrometryISO 16063-21 Vibration Calibration Using Laser VibrometersISO 16063-31 Vibration Calibration Using Reference AccelerometersISO 16063-41 Vibration Calibration of Seismic SensorsISO 16063-5 Vibration Calibration Using Electro-dynamic ExcitersISO 17025 Accredited Environmental Noise Measurement ServicesISO 1996-1 Determination of Environmental Noise LevelsISO 226 Equal-Loudness-Level ContoursISO 2631-1 Evaluation of Human Exposure to Whole-Body VibrationISO 2631-2 Evaluation of Human Exposure to Whole-Body Vibration in VehiclesISO 2631-5 Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body VibrationISO 266 Acoustics - Preferred Frequencies for Spectral AnalysisISO 2954 Electroacoustics - Measurement MicrophonesISO 4866 Mechanical Vibration and Shock – Vibration Measuring InstrumentsISO 5349 Measurement of Human Exposure to Hand-Transmitted VibrationISO 5349-2 Measurement of Hand-Transmitted Vibration - Practical GuidanceISO 6954 Guidelines for the Measurement and Assessment of Vibration in BuildingsISO 8041 Measurement of Human Exposure to Mechanical Vibration and ShockISO 8041-1 Human Exposure to Vibration - Measurement and EvaluationISO 9612 Determination of Occupational Noise ExposureISO 9613-1 Attenuation of Sound During Propagation Outdoors - Calculation MethodsISO 9613-2 Attenuation of Sound During Propagation OutdoorsISO 9614-1 Determination of Sound Power Levels Using Sound Intensity

IEC 61260-1 Electroacoustics - Octave-Band and Fractional-Octave-Band Filters Laboratory Testing Service: A Comprehensive Guide

The International Electrotechnical Commission (IEC) standard IEC 61260-1 provides a framework for the measurement of sound levels in octave-band and fractional-octave-band filters. This standard is essential for ensuring that products meet regulatory requirements and industry standards.

Legal and Regulatory Framework

The legal and regulatory framework surrounding this testing service is governed by international and national standards, including ISO 3741 (Acoustics - Determination of sound power levels of noise sources using sound pressure), ASTM E6167 (Standard Test Method for Laboratory Measurement of Sound Power Levels of Noise Sources Using Acoustic Hoods or Radiation Envelopes), EN 61400-11 (Wind turbines - Part 11: Acoustic assessment of noise generated by wind turbines), and TSE IEC 61260-1 (Turkish Standard, equivalent to IEC 61260-1).

Standard Development Organizations

The International Electrotechnical Commission (IEC) is responsible for the development and maintenance of international standards. The European Committee for Electrotechnical Standardization (CENELEC) and the Turkish Standards Institution (TSE) are also involved in standard development.

Evolution of Standards

Standards evolve over time as new technologies emerge, and existing ones are updated to reflect changing requirements. This ensures that testing services remain relevant and effective in ensuring product safety and regulatory compliance.

Standard Numbers and Scope

IEC 61260-1 has the following scope:

  • Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Measurements of the sound pressure level of a broad band noise signal with a dominant component at or near the centre frequency

    • The standard provides detailed requirements for testing octave-band and fractional-octave-band filters, including measurement procedures, equipment calibration, and data analysis.

    Standard Compliance Requirements

    Compliance with IEC 61260-1 is mandatory in various industries, including:

  • Acoustic and noise control

  • Audio engineering

  • Aerospace

  • Automotive

  • Building construction

    • Failure to comply with the standard can result in product recalls, fines, or even company shutdowns.

    Why This Test is Needed

    The IEC 61260-1 test is essential for ensuring that products meet regulatory requirements and industry standards. The test provides accurate measurements of sound levels, which are critical in various applications, including:

  • Noise reduction

  • Acoustic treatment

  • Sound system design

    • The IEC 61260-1 standard requires specific testing procedures, equipment calibration, and data analysis to ensure accurate measurements. The business and technical reasons for conducting this test include:

  • Ensuring product safety and regulatory compliance

  • Reducing noise pollution

  • Improving acoustic treatment

  • Enhancing sound system design

    • Consequences of Not Performing This Test

    Failure to perform the IEC 61260-1 test can result in non-compliance with regulations, product recalls, fines, or even company shutdowns.

    Industries and Sectors that Require This Testing

    The following industries require IEC 61260-1 testing:

  • Acoustic and noise control

  • Audio engineering

  • Aerospace

  • Automotive

  • Building construction

    • Risk Factors and Safety Implications

    Failure to perform the IEC 61260-1 test can result in:

  • Noise pollution

  • Hearing loss

  • Product damage

  • Regulatory non-compliance

    • Quality Assurance and Quality Control Aspects

    The quality assurance and quality control aspects of the IEC 61260-1 test include:

  • Equipment calibration

  • Data analysis

  • Quality control measures during testing

    • The IEC 61260-1 test is conducted according to the following conditions:

  • Temperature: 23C 2C

  • Humidity: 50 10

  • Pressure: 1013 mbar 5

    • Testing Equipment and Instruments

    The testing equipment used for IEC 61260-1 includes:

  • Microphones

  • Power amplifiers

  • Signal generators

  • Audio analyzers

    • Sample Preparation Procedures

    The sample preparation procedures include:

  • Measuring the sound pressure level of a broad band noise signal with a dominant component at or near the centre frequency

  • Calculating the sound power level of the noise source

    • Testing Parameters and Conditions

    The testing parameters and conditions include:

  • Frequency range: 10 Hz to 16 kHz

  • Number of octave bands: 1/3, 1/2, and 1

  • Measurement duration: 30 seconds to 1 minute

    • Data Analysis

    The data analysis includes:

  • Calculating the sound pressure level

  • Determining the sound power level

  • Measuring the frequency response

    • Why Choose IEC 61260-1 Testing Service?

    IEC 61260-1 testing service is essential for ensuring product safety and regulatory compliance. Our experienced technicians will conduct the test according to the standard, providing accurate measurements of sound levels.

    Conclusion

    The IEC 61260-1 electroacoustics - octave-band and fractional-octave-band filters laboratory testing service is a comprehensive guide that provides detailed requirements for testing octave-band and fractional-octave-band filters. The standard ensures accurate measurements of sound levels, which are critical in various applications. Failure to comply with the standard can result in product recalls, fines, or even company shutdowns.

    IEC 61260-1 Testing Services

    Our experienced technicians will conduct IEC 61260-1 testing services according to the standard, providing accurate measurements of sound levels. We offer a wide range of services, including:

  • Measurement of sound pressure level

  • Determination of sound power level

  • Frequency response measurement

    • Contact us today to learn more about our IEC 61260-1 testing services and how we can help you ensure product safety and regulatory compliance.

    References

    1 International Electrotechnical Commission (IEC). (2018). IEC 61260-1:2017(E) - Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Measurements of the sound pressure level of a broad band noise signal with a dominant component at or near the centre frequency

    2 American Society for Testing and Materials (ASTM). (2018). ASTM E6167-18 - Standard Test Method for Laboratory Measurement of Sound Power Levels of Noise Sources Using Acoustic Hoods or Radiation Envelopes

    3 European Committee for Electrotechnical Standardization (CENELEC). (2018). EN 61400-11:2017(E) - Wind turbines - Part 11: Acoustic assessment of noise generated by wind turbines

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers