EUROLAB
iec-61094-4-measurement-microphones-part-4-technical-specifications
Noise and Vibration Measurement ANSI S1.1 Acoustical TerminologyANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Analog FiltersANSI S1.13 Sound Level Calibrator TestingANSI S1.20 Measurement of Sound Exposure LevelsANSI S1.25 Measurement of Sound in Air Under Reverberant ConditionsANSI S1.4 Sound Level Meter Testing and CalibrationANSI S1.43 Specification for Sound Level MetersANSI S12.10 Measurement of Noise Emitted by Industrial EquipmentANSI S12.18 Acoustic Noise Measurement ProceduresANSI S12.19 Measurement of Road Traffic NoiseANSI S12.2 Criteria for Evaluating Community NoiseANSI S12.42 Sound Source CharacterizationANSI S12.51 Sound Level Meter CalibrationANSI S12.9 Measurement of Environmental Noise - Part 2: Noise AssessmentANSI S3.26 Measurement of Room Acoustic ParametersANSI S3.34 Measurement of Impulse NoiseIEC 60068-2-27 Environmental Testing - Shock and BumpIEC 60068-2-27 Shock TestingIEC 60068-2-6 Environmental Testing - Sinusoidal VibrationIEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance)IEC 60268-1 Sound System Equipment - Part 1: General RequirementsIEC 60268-16 Sound System Equipment - Objective Rating of Speech IntelligibilityIEC 60268-3 Electroacoustics - LoudspeakersIEC 60268-5 Electroacoustics - Sound Level Meters - Performance TestsIEC 60268-7 Sound Level Meters - Electromechanical PerformanceIEC 60572 Sound Level Meters – Performance SpecificationsIEC 61094-2 Measurement Microphones - Part 2: Calibration MethodsIEC 61260-1 Electroacoustics - Octave-Band and Fractional-Octave-Band FiltersIEC 61672-1 Electroacoustics - Sound Level Meter SpecificationsIEC 61672-2 Electroacoustics - Sound Level Meter - Part 2: Pattern Evaluation TestsIEC 61672-3 Electroacoustics - Sound Level Meters - Part 3: Periodic TestsISO 10816-1 Evaluation of Machine Vibration - General GuidelinesISO 10816-3 Evaluation of Machine Vibration by Measurements on Non-Rotating PartsISO 10816-4 Evaluation of Machine Vibration by Measurements on Rotating ShaftsISO 11201 Measurement of Noise Emitted by Accelerating Road VehiclesISO 11202 Measurement of Noise Emitted by Stationary Road VehiclesISO 11203 Determination of Noise Emission in the EnvironmentISO 140 Noise Control - Measurement of Noise EmissionISO 15666 Assessment of Noise Annoyance in CommunitiesISO 16063-11 Vibration Calibration Using Primary Vibration StandardsISO 16063-2 Vibration Calibration Using Primary Vibration StandardsISO 16063-21 Vibration Calibration Using Laser Doppler VibrometryISO 16063-21 Vibration Calibration Using Laser VibrometersISO 16063-31 Vibration Calibration Using Reference AccelerometersISO 16063-41 Vibration Calibration of Seismic SensorsISO 16063-5 Vibration Calibration Using Electro-dynamic ExcitersISO 17025 Accredited Environmental Noise Measurement ServicesISO 1996-1 Determination of Environmental Noise LevelsISO 226 Equal-Loudness-Level ContoursISO 2631-1 Evaluation of Human Exposure to Whole-Body VibrationISO 2631-2 Evaluation of Human Exposure to Whole-Body Vibration in VehiclesISO 2631-5 Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body VibrationISO 266 Acoustics - Preferred Frequencies for Spectral AnalysisISO 2954 Electroacoustics - Measurement MicrophonesISO 4866 Mechanical Vibration and Shock – Vibration Measuring InstrumentsISO 5349 Measurement of Human Exposure to Hand-Transmitted VibrationISO 5349-2 Measurement of Hand-Transmitted Vibration - Practical GuidanceISO 6954 Guidelines for the Measurement and Assessment of Vibration in BuildingsISO 8041 Measurement of Human Exposure to Mechanical Vibration and ShockISO 8041-1 Human Exposure to Vibration - Measurement and EvaluationISO 9612 Determination of Occupational Noise ExposureISO 9613-1 Attenuation of Sound During Propagation Outdoors - Calculation MethodsISO 9613-2 Attenuation of Sound During Propagation OutdoorsISO 9614-1 Determination of Sound Power Levels Using Sound Intensity

IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications Laboratory Testing Service

Standard-Related Information

The International Electrotechnical Commission (IEC) has published the standard IEC 61094-4, which specifies the technical requirements for measurement microphones. This standard is part of a larger series of standards that cover various aspects of measurement microphone design, testing, and application.

The relevant standards governing IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications testing are:

  • ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories)

  • EN 61460-2 (Measurement microphones - Part 2: Calibration of measurement microphones)

  • TSE IEC 61094-4 (Measurement microphones - Part 4: Technical specifications)

    • These standards outline the technical requirements, testing procedures, and acceptance criteria for measurement microphones. The standard also specifies the calibration procedures and requirements for measurement microphones.

    Standard Development Organizations

    The International Electrotechnical Commission (IEC) is responsible for developing and publishing international standards related to electrotechnology, including measurement microphones. IEC has over 80 member countries and is headquartered in Geneva, Switzerland.

    Why Standards Evolve

    Standards evolve due to technological advancements, changes in industry requirements, or the need for updated testing procedures. The standard development process involves a collaborative effort between experts from various countries and industries.

    Standard Numbers and Scope

    The following are some of the key standard numbers related to IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications:

  • IEC 61094-1 (Measurement microphones - Part 1: General requirements)

  • IEC 61094-2 (Measurement microphones - Part 2: Calibration of measurement microphones)

  • IEC 61094-3 (Measurement microphones - Part 3: Basic requirements for the calibration and testing of measurement microphones)

  • IEC 61094-4 (Measurement microphones - Part 4: Technical specifications)

    • These standards cover various aspects of measurement microphone design, testing, and application.

    Standard Compliance Requirements

    Industry sectors requiring compliance with IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications include:

  • Aerospace

  • Automotive

  • Medical

  • Industrial

  • Acoustic research

    • Conforming to these standards is essential for industries that rely on accurate measurement microphone performance.

    Standard-Related Risks and Consequences

    Failure to comply with IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications can lead to:

  • Inaccurate measurements, compromising product quality

  • Non-compliance with regulatory requirements, resulting in fines or penalties

  • Damage to reputation due to non-conforming products

    • Test Conditions and Methodology

    The following is a step-by-step explanation of the testing process for IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications:

    1. Sample Preparation: The measurement microphone is properly prepared for testing, including any necessary calibration.

    2. Testing Equipment: Appropriate testing equipment and instruments are used to conduct the measurements, such as sound level meters or signal generators.

    3. Testing Environment: The testing environment meets the standard requirements, which include temperature, humidity, pressure, and noise levels.

    4. Measurement Parameters: The measurement parameters are set according to the standard requirements, including frequency range, sensitivity, and linearity.

    5. Calibration and Validation: Calibration procedures are followed to ensure accurate measurements, and validation is performed to verify the results.

    Reporting and Documentation

    The test report format and structure are outlined in the standard, which includes:

  • Summary of testing parameters

  • Test results and data

  • Interpretation of test results

  • Conclusion and recommendations

    • The reporting standards and formats for IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications include:

  • ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories)

  • EN 61460-2 (Measurement microphones - Part 2: Calibration of measurement microphones)

    • Why this Test Should be Performed

    Performing IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications testing offers numerous benefits, including:

  • Risk Assessment and Mitigation: Identifying potential performance issues and addressing them before product release.

  • Quality Assurance and Compliance: Ensuring conformance to regulatory requirements and industry standards.

  • Competitive Advantages: Demonstrating commitment to quality and compliance.

  • Cost Savings and Efficiency Improvements: Reducing the risk of costly recalls or rework due to non-compliance.

  • Legal and Regulatory Compliance Benefits: Avoiding fines, penalties, or reputational damage.

    • Why Eurolab Should Provide this Service

    Eurolab is a leading testing and calibration laboratory with extensive experience in measurement microphone testing. Our expertise and facilities ensure that tests are conducted accurately and efficiently, providing customers with reliable results and minimizing the risk of non-compliance.

    Our services include:

  • Measurement Microphone Calibration: Ensuring accurate measurements by calibrating measurement microphones.

  • Testing and Validation: Conducting tests to verify compliance with regulatory requirements and industry standards.

  • Reporting and Documentation: Providing detailed reports, including summary of testing parameters, test results, and interpretation of test results.

    • Conclusion

    IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications is an essential standard for industries relying on accurate measurement microphone performance. Performing this testing ensures compliance with regulatory requirements and industry standards, reducing the risk of costly recalls or rework due to non-compliance.

    Eurolabs expertise in measurement microphone testing provides customers with reliable results, minimizing the risk of non-compliance. Our services include measurement microphone calibration, testing and validation, reporting and documentation.

    Contact us today to learn more about our IEC 61094-4 Measurement Microphones - Part 4: Technical Specifications testing services.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers