EUROLAB
iec-60268-3-electroacoustics-loudspeakers
Noise and Vibration Measurement ANSI S1.1 Acoustical TerminologyANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Analog FiltersANSI S1.13 Sound Level Calibrator TestingANSI S1.20 Measurement of Sound Exposure LevelsANSI S1.25 Measurement of Sound in Air Under Reverberant ConditionsANSI S1.4 Sound Level Meter Testing and CalibrationANSI S1.43 Specification for Sound Level MetersANSI S12.10 Measurement of Noise Emitted by Industrial EquipmentANSI S12.18 Acoustic Noise Measurement ProceduresANSI S12.19 Measurement of Road Traffic NoiseANSI S12.2 Criteria for Evaluating Community NoiseANSI S12.42 Sound Source CharacterizationANSI S12.51 Sound Level Meter CalibrationANSI S12.9 Measurement of Environmental Noise - Part 2: Noise AssessmentANSI S3.26 Measurement of Room Acoustic ParametersANSI S3.34 Measurement of Impulse NoiseIEC 60068-2-27 Environmental Testing - Shock and BumpIEC 60068-2-27 Shock TestingIEC 60068-2-6 Environmental Testing - Sinusoidal VibrationIEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance)IEC 60268-1 Sound System Equipment - Part 1: General RequirementsIEC 60268-16 Sound System Equipment - Objective Rating of Speech IntelligibilityIEC 60268-5 Electroacoustics - Sound Level Meters - Performance TestsIEC 60268-7 Sound Level Meters - Electromechanical PerformanceIEC 60572 Sound Level Meters – Performance SpecificationsIEC 61094-2 Measurement Microphones - Part 2: Calibration MethodsIEC 61094-4 Measurement Microphones - Part 4: Technical SpecificationsIEC 61260-1 Electroacoustics - Octave-Band and Fractional-Octave-Band FiltersIEC 61672-1 Electroacoustics - Sound Level Meter SpecificationsIEC 61672-2 Electroacoustics - Sound Level Meter - Part 2: Pattern Evaluation TestsIEC 61672-3 Electroacoustics - Sound Level Meters - Part 3: Periodic TestsISO 10816-1 Evaluation of Machine Vibration - General GuidelinesISO 10816-3 Evaluation of Machine Vibration by Measurements on Non-Rotating PartsISO 10816-4 Evaluation of Machine Vibration by Measurements on Rotating ShaftsISO 11201 Measurement of Noise Emitted by Accelerating Road VehiclesISO 11202 Measurement of Noise Emitted by Stationary Road VehiclesISO 11203 Determination of Noise Emission in the EnvironmentISO 140 Noise Control - Measurement of Noise EmissionISO 15666 Assessment of Noise Annoyance in CommunitiesISO 16063-11 Vibration Calibration Using Primary Vibration StandardsISO 16063-2 Vibration Calibration Using Primary Vibration StandardsISO 16063-21 Vibration Calibration Using Laser Doppler VibrometryISO 16063-21 Vibration Calibration Using Laser VibrometersISO 16063-31 Vibration Calibration Using Reference AccelerometersISO 16063-41 Vibration Calibration of Seismic SensorsISO 16063-5 Vibration Calibration Using Electro-dynamic ExcitersISO 17025 Accredited Environmental Noise Measurement ServicesISO 1996-1 Determination of Environmental Noise LevelsISO 226 Equal-Loudness-Level ContoursISO 2631-1 Evaluation of Human Exposure to Whole-Body VibrationISO 2631-2 Evaluation of Human Exposure to Whole-Body Vibration in VehiclesISO 2631-5 Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body VibrationISO 266 Acoustics - Preferred Frequencies for Spectral AnalysisISO 2954 Electroacoustics - Measurement MicrophonesISO 4866 Mechanical Vibration and Shock – Vibration Measuring InstrumentsISO 5349 Measurement of Human Exposure to Hand-Transmitted VibrationISO 5349-2 Measurement of Hand-Transmitted Vibration - Practical GuidanceISO 6954 Guidelines for the Measurement and Assessment of Vibration in BuildingsISO 8041 Measurement of Human Exposure to Mechanical Vibration and ShockISO 8041-1 Human Exposure to Vibration - Measurement and EvaluationISO 9612 Determination of Occupational Noise ExposureISO 9613-1 Attenuation of Sound During Propagation Outdoors - Calculation MethodsISO 9613-2 Attenuation of Sound During Propagation OutdoorsISO 9614-1 Determination of Sound Power Levels Using Sound Intensity

IEC 60268-3 Electroacoustics - Loudspeakers Laboratory Testing Service Provided by Eurolab

IEC 60268-3 is a widely recognized international standard that outlines the requirements for loudspeaker measurements and testing. This standard is part of the IEC 60268 series, which provides a comprehensive framework for electroacoustic measurement and testing.

Legal and Regulatory Framework

The legal and regulatory framework surrounding IEC 60268-3 testing is governed by various national and international standards. In Europe, the EN 60268-3 standard is adopted as a harmonized standard under the EUs Directive on electromagnetic compatibility (EMC). The standard is also referenced in other directives, such as the Low Voltage Directive (LVD) and the Machinery Directive (MD).

International and National Standards

The IEC 60268-3 standard has been adopted by numerous countries around the world. Some of the key international standards that apply to this specific laboratory test include:

  • ISO 60268-3:2018 (IEC 60268-3)

  • ASTM C579-18

  • EN 60268-3:2019

    • These standards provide a framework for testing loudspeakers and ensuring compliance with regulatory requirements.

    Standard Development Organizations

    Standard development organizations play a crucial role in maintaining the accuracy and relevance of technical standards. In the case of IEC 60268-3, the standard is developed and maintained by the International Electrotechnical Commission (IEC). The IEC is responsible for developing and publishing international standards related to electrical engineering.

    Standards Evolution and Updates

    Standards evolve over time as new technologies emerge and existing ones are refined. The IEC 60268-3 standard has undergone several revisions since its initial publication in 1973. Each revision reflects the latest advancements in loudspeaker technology and measurement techniques.

    Specific Standard Numbers and Scope

    The following is a summary of the key standard numbers and their scope:

  • ISO/IEC 60268-3:2018 (IEC 60268-3) - Loudspeakers - Measurement of electrical and acoustic performance

  • ASTM C579-18 - Test Methods for Sound Calibrators

  • EN 60268-3:2019 - Electroacoustics - Loudspeakers - Measurement of electrical and acoustic performance

    • Standard Compliance Requirements

    Loudspeaker manufacturers must comply with the relevant standards to ensure their products meet regulatory requirements. Compliance is typically demonstrated through a series of laboratory tests, including those outlined in IEC 60268-3.

    Industries and Sectors Requiring This Testing

    The following industries and sectors require testing according to IEC 60268-3:

  • Consumer electronics

  • Professional audio equipment

  • Automotive systems

  • Medical devices

    • Risk Factors and Safety Implications

    Non-compliance with IEC 60268-3 can result in a range of risks, including:

  • Electrical shock or fire hazards

  • Reduced sound quality or fidelity

  • Inadequate safety features or warnings

    • Quality Assurance and Quality Control Aspects

    Loudspeaker manufacturers must implement quality assurance and quality control measures to ensure compliance with IEC 60268-3. This includes:

  • Regular testing and calibration of equipment

  • Training personnel on measurement techniques and standards

  • Implementing corrective actions for non-compliance issues

    • Competitive Advantages and Cost-Benefit Analysis

    Performing IEC 60268-3 testing provides several competitive advantages, including:

  • Enhanced product safety and reliability

  • Compliance with regulatory requirements

  • Improved sound quality or fidelity

  • Increased customer confidence and trust

    • The cost-benefit analysis of performing this test is typically positive, as it can help manufacturers avoid costly redesigns or recalls.

    Why This Specific Test is Needed and Required

    IEC 60268-3 testing is necessary to ensure loudspeaker products meet regulatory requirements and industry standards. The standard provides a framework for measuring the electrical and acoustic performance of loudspeakers, which is critical for ensuring product safety and quality.

    Business and Technical Reasons for Conducting IEC 60268-3 Testing

    The business and technical reasons for conducting IEC 60268-3 testing include:

  • Ensuring compliance with regulatory requirements

  • Demonstrating product safety and reliability

  • Improving sound quality or fidelity

  • Enhancing customer confidence and trust

    • Consequences of Not Performing This Test

    Non-compliance with IEC 60268-3 can result in severe consequences, including:

  • Regulatory fines or penalties

  • Product recalls or redesigns

  • Damage to brand reputation or customer trust

    • Industries and Sectors That Require This Testing

    The following industries and sectors require testing according to IEC 60268-3:

  • Consumer electronics

  • Professional audio equipment

  • Automotive systems

  • Medical devices

    • Testing Requirements for Specific Applications

    IEC 60268-3 testing is required for various applications, including:

  • Home entertainment systems

  • Public address systems

  • Aircraft or marine audio systems

  • Medical device manufacturers

    • Test Methods and Procedures

    The following test methods and procedures are outlined in IEC 60268-3:

  • Measurement of electrical performance (e.g., impedance, efficiency)

  • Measurement of acoustic performance (e.g., frequency response, sound pressure level)

  • Testing for distortion or harmonic content

    • Standardized Test Equipment and Calibration

    IEC 60268-3 specifies the use of standardized test equipment and calibration procedures to ensure accurate measurement results.

    Testing Frequency and Schedule

    The testing frequency and schedule depend on various factors, including:

  • Product type or application

  • Regulatory requirements

  • Industry standards or best practices

    • Test Report and Certification

    A test report and certification are typically issued after completing IEC 60268-3 testing. The report includes the results of the measurements and a declaration of compliance with regulatory requirements.

    ...

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers