EUROLAB
iec-60068-2-64-environmental-testing-vibration-broadband-random-and-guidance
Noise and Vibration Measurement ANSI S1.1 Acoustical TerminologyANSI S1.11 Specification for Octave-Band and Fractional-Octave-Band Analog FiltersANSI S1.13 Sound Level Calibrator TestingANSI S1.20 Measurement of Sound Exposure LevelsANSI S1.25 Measurement of Sound in Air Under Reverberant ConditionsANSI S1.4 Sound Level Meter Testing and CalibrationANSI S1.43 Specification for Sound Level MetersANSI S12.10 Measurement of Noise Emitted by Industrial EquipmentANSI S12.18 Acoustic Noise Measurement ProceduresANSI S12.19 Measurement of Road Traffic NoiseANSI S12.2 Criteria for Evaluating Community NoiseANSI S12.42 Sound Source CharacterizationANSI S12.51 Sound Level Meter CalibrationANSI S12.9 Measurement of Environmental Noise - Part 2: Noise AssessmentANSI S3.26 Measurement of Room Acoustic ParametersANSI S3.34 Measurement of Impulse NoiseIEC 60068-2-27 Environmental Testing - Shock and BumpIEC 60068-2-27 Shock TestingIEC 60068-2-6 Environmental Testing - Sinusoidal VibrationIEC 60268-1 Sound System Equipment - Part 1: General RequirementsIEC 60268-16 Sound System Equipment - Objective Rating of Speech IntelligibilityIEC 60268-3 Electroacoustics - LoudspeakersIEC 60268-5 Electroacoustics - Sound Level Meters - Performance TestsIEC 60268-7 Sound Level Meters - Electromechanical PerformanceIEC 60572 Sound Level Meters – Performance SpecificationsIEC 61094-2 Measurement Microphones - Part 2: Calibration MethodsIEC 61094-4 Measurement Microphones - Part 4: Technical SpecificationsIEC 61260-1 Electroacoustics - Octave-Band and Fractional-Octave-Band FiltersIEC 61672-1 Electroacoustics - Sound Level Meter SpecificationsIEC 61672-2 Electroacoustics - Sound Level Meter - Part 2: Pattern Evaluation TestsIEC 61672-3 Electroacoustics - Sound Level Meters - Part 3: Periodic TestsISO 10816-1 Evaluation of Machine Vibration - General GuidelinesISO 10816-3 Evaluation of Machine Vibration by Measurements on Non-Rotating PartsISO 10816-4 Evaluation of Machine Vibration by Measurements on Rotating ShaftsISO 11201 Measurement of Noise Emitted by Accelerating Road VehiclesISO 11202 Measurement of Noise Emitted by Stationary Road VehiclesISO 11203 Determination of Noise Emission in the EnvironmentISO 140 Noise Control - Measurement of Noise EmissionISO 15666 Assessment of Noise Annoyance in CommunitiesISO 16063-11 Vibration Calibration Using Primary Vibration StandardsISO 16063-2 Vibration Calibration Using Primary Vibration StandardsISO 16063-21 Vibration Calibration Using Laser Doppler VibrometryISO 16063-21 Vibration Calibration Using Laser VibrometersISO 16063-31 Vibration Calibration Using Reference AccelerometersISO 16063-41 Vibration Calibration of Seismic SensorsISO 16063-5 Vibration Calibration Using Electro-dynamic ExcitersISO 17025 Accredited Environmental Noise Measurement ServicesISO 1996-1 Determination of Environmental Noise LevelsISO 226 Equal-Loudness-Level ContoursISO 2631-1 Evaluation of Human Exposure to Whole-Body VibrationISO 2631-2 Evaluation of Human Exposure to Whole-Body Vibration in VehiclesISO 2631-5 Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole-Body VibrationISO 266 Acoustics - Preferred Frequencies for Spectral AnalysisISO 2954 Electroacoustics - Measurement MicrophonesISO 4866 Mechanical Vibration and Shock – Vibration Measuring InstrumentsISO 5349 Measurement of Human Exposure to Hand-Transmitted VibrationISO 5349-2 Measurement of Hand-Transmitted Vibration - Practical GuidanceISO 6954 Guidelines for the Measurement and Assessment of Vibration in BuildingsISO 8041 Measurement of Human Exposure to Mechanical Vibration and ShockISO 8041-1 Human Exposure to Vibration - Measurement and EvaluationISO 9612 Determination of Occupational Noise ExposureISO 9613-1 Attenuation of Sound During Propagation Outdoors - Calculation MethodsISO 9613-2 Attenuation of Sound During Propagation OutdoorsISO 9614-1 Determination of Sound Power Levels Using Sound Intensity

Comprehensive Guide to IEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance)

Introduction

IEC 60068-2-64 is an international standard that specifies the requirements for environmental testing of electronic equipment, including vibration testing. This standard is widely adopted by various industries, including electronics, aerospace, automotive, and more. In this article, we will provide a comprehensive guide to IEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance) laboratory testing services provided by Eurolab.

Standard-Related Information

IEC 60068-2-64 is part of the IEC 60068 series, which covers environmental testing for electronic equipment. This standard specifies the requirements for vibration testing, including broadband random and guidance methods. The standard is widely recognized and adopted globally, with equivalent standards in various countries.

  • ISO/IEC 17025: Accreditation standard for laboratory testing and calibration

  • EN 61373: European standard for vibration testing of electronic equipment

  • ASTM F1115-08: American standard for vibration testing of electronic equipment

  • TSE EN 60068-2-64: Turkish standard for environmental testing, equivalent to IEC 60068-2-64

    • The legal and regulatory framework surrounding this testing service is governed by various international and national standards. These standards are developed and maintained by organizations such as the International Electrotechnical Commission (IEC), the European Committee for Standardization (CEN), and the American Society for Testing and Materials (ASTM).

    Standard Requirements and Needs

    IEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance) is a critical test for electronic equipment manufacturers, as it ensures that their products can withstand various environmental conditions. This test is required by various industries, including:

  • Aerospace: Electronic components must be tested to ensure they can withstand the harsh environment of space

  • Automotive: Electronic components must be tested to ensure they can withstand the vibrations and temperatures associated with vehicle operation

  • Electronics: Electronic equipment must be tested to ensure they can withstand various environmental conditions, including temperature, humidity, and vibration

    • Consequences of not performing this test include:

  • Product failure: Failure to perform this test may result in product failure, which can lead to costly recalls and reputation damage

  • Safety risks: Failure to perform this test may also pose safety risks to users, as products may malfunction or cause injuries

    • Test Conditions and Methodology

    The IEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance) laboratory testing service provided by Eurolab involves the following steps:

    1. Sample preparation: Samples are prepared according to the standard requirements, including cleaning, drying, and packaging

    2. Testing equipment: Equipment is calibrated and validated to ensure accuracy and reliability

    3. Testing environment: The testing environment is set up according to the standard requirements, including temperature, humidity, pressure, and vibration levels

    4. Testing parameters: Testing parameters are set according to the standard requirements, including frequency, amplitude, and duration

    5. Measurement and analysis: Measurements are taken and analyzed according to the standard requirements, including data collection, recording, and reporting

    Test Reporting and Documentation

    The test report provided by Eurolab includes:

  • Summary of testing: A summary of the testing performed, including equipment used, testing parameters, and results

  • Results: Detailed results of the testing, including graphs, tables, and charts

  • Interpretation: Interpretation of the results, including discussion of any deviations or anomalies

  • Certification and accreditation: Information on certification and accreditation of Eurolabs laboratory

    • Why This Test Should Be Performed

    This test is essential for manufacturers who want to ensure their products can withstand various environmental conditions. The benefits of performing this test include:

  • Quality assurance: Ensures that products meet the required standards and specifications

  • Compliance: Ensures compliance with international and national standards, including IEC 60068-2-64

  • Competitive advantage: Provides a competitive advantage in the market by demonstrating product reliability and durability

  • Cost savings: Can help reduce costs associated with product failure and recalls

    • Why Eurolab Should Provide This Service

    Eurolab is an experienced laboratory testing provider, with state-of-the-art equipment and facilities. Our qualified and certified personnel ensure that all tests are performed accurately and reliably.

  • Expertise: Eurolab has extensive experience in performing IEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance) tests

  • Equipment: Eurolabs laboratory is equipped with the latest testing equipment, ensuring accuracy and reliability of results

  • Certification: Eurolabs laboratory is accredited to ISO/IEC 17025:2017, ensuring compliance with international standards

    • In conclusion, IEC 60068-2-64 Environmental Testing - Vibration (Broadband Random and Guidance) is a critical test for electronic equipment manufacturers. This test ensures that products can withstand various environmental conditions, including temperature, humidity, and vibration. Eurolab provides this laboratory testing service, with expert personnel and state-of-the-art equipment ensuring accurate and reliable results.

    References

  • IEC 60068-2-64: Environmental testing - Part 2-64: Vibration (Broadband random and guidance methods) (2016)

  • ISO/IEC 17025: General requirements for the competence of testing and calibration laboratories (2017)

  • EN 61373: European standard for vibration testing of electronic equipment (2008)

  • ASTM F1115-08: American standard for vibration testing of electronic equipment (2008)

    • Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers