EUROLAB
bs-en-933-3-determination-of-particle-shape
Aggregate Testing AASHTO T104 Soundness of Aggregate by Use of Sodium Sulfate or Magnesium SulfateAASHTO T113 Lightweight Particles in AggregateAASHTO T176 Plastic Fines in Graded Aggregate and SoilsAASHTO T255 Sand Equivalent Value of Soils and Fine AggregateAASHTO T27 Sieve Analysis of Fine and Coarse AggregatesAASHTO T304 Moisture Content of Aggregate by DryingAASHTO T84 Specific Gravity and Absorption of Fine AggregateAASHTO T85 Specific Gravity and Absorption of Coarse AggregateAASHTO T96 Resistance to Degradation of Coarse Aggregate by Abrasion and Impact in the Los Angeles MachineASTM C113 Standard Test Method for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)ASTM C117 Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by WashingASTM C117 Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by WashingASTM C123 Gradation of Fine AggregateASTM C1231 Petrographic Examination of AggregatesASTM C127 Density, Relative Density (Specific Gravity), and Absorption of Coarse AggregateASTM C128 Density, Relative Density (Specific Gravity), and Absorption of Fine AggregateASTM C131 Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and ImpactASTM C131 Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and ImpactASTM C131 Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and ImpactASTM C136 Sieve Analysis of Fine and Coarse AggregatesASTM C1365 Determination of Particle Shape Characteristics of Fine AggregateASTM C142 Clay Lumps and Friable Particles in AggregatesASTM C143 Gradation of AggregateASTM C174 Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Saturated Surface-Dry SpecimensASTM C29 Bulk Density (“Unit Weight”) and Voids in AggregateASTM C295 Petrographic Examination of AggregatesASTM C33 Specification for Concrete AggregatesASTM C40 Organic Impurities in Fine AggregateASTM C535 Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles MachineASTM C566 Total Moisture Content of Aggregate by DryingASTM C566 Total Moisture Content of Aggregate by DryingASTM C70 Surface Moisture in Fine AggregateASTM C88 Soundness of Aggregates by Use of Sodium Sulfate or Magnesium SulfateASTM C88 Soundness of Aggregates by Use of Sodium Sulfate or Magnesium SulfateASTM D1556 Density and Unit Weight of Soil in Place by the Sand-Cone MethodASTM D1557 Laboratory Compaction Characteristics of Soil Using Modified EffortASTM D2419 Sand Equivalent Value of Soils and Fine AggregateASTM D4318 Liquid Limit, Plastic Limit, and Plasticity Index of SoilsASTM D448 Classification for Sizes of Aggregate for Road and Bridge ConstructionASTM D4791 Flat Particles, Elongation Index, and Degradation of Coarse AggregateASTM D5821 Bulk Specific Gravity of Compacted Asphalt Mixtures Using Saturated Surface-Dry SpecimensASTM D698 Laboratory Compaction Characteristics of Soil Using Standard EffortASTM D75 Sampling AggregatesBS 812-103 Testing Aggregates – Particle Size DistributionBS 812-110 Shape and Texture of Aggregate ParticlesBS 812-111 Determination of Aggregate Flakiness IndexBS EN 1097-2 Mechanical and Physical Properties TestingBS EN 932-1 General Sampling of AggregatesBS EN 932-3 Particle Size DistributionEN 1097-2 Tests for Mechanical and Physical Properties of Aggregates — Part 2: Methods for Determination of Resistance to FragmentationEN 1097-6 Determination of Particle Density and Water AbsorptionEN 1097-7 Determination of the Resistance to Wear by AbrasionEN 12620 Aggregates for ConcreteEN 13043 Aggregates for Bituminous Mixtures and Surface Treatments for Roads, Airfields, and Other Trafficked AreasEN 932-2 Tests for General Properties of Aggregates — Part 2: Methods for SamplingEN 933-1 Tests for Geometrical Properties of Aggregates — Part 1: Determination of Particle Size Distribution — Sieving MethodISO 11272 Determination of Resistance to Crushing of Coarse AggregateISO 13503-2 Determination of Particle Size DistributionISO 19579 Determination of Aggregate Angularity

BS EN 933-3 Determination of Particle Shape Laboratory Testing Service Provided by Eurolab

The determination of particle shape is a critical aspect of various industries, including construction materials, ceramics, glass, and pharmaceuticals. BS EN 933-3:2012A1:2019 is the British Standard for the determination of particle shape, which is widely recognized and adopted globally. This standard specifies the test methods for determining the particle shape of granular materials.

Legal and Regulatory Framework

The legal and regulatory framework surrounding this testing service is governed by various international and national standards. Some of the key standards include:

  • BS EN 933-3:2012A1:2019

  • ISO 9276-6:2008

  • ASTM C1250-14

  • TSE 777:2017

    • These standards ensure that the testing service is conducted in accordance with established guidelines and protocols.

    International and National Standards

    The BS EN 933-3 standard is developed by the European Committee for Standardization (CEN) and is based on ISO 9276-6. The standard has undergone several revisions, with the latest amendment in 2019. The standard specifies two test methods: the Image Analysis Method and the Sieve Test Method.

    Standard Development Organizations

    The standard development organizations involved in the creation of BS EN 933-3 include:

  • CEN (European Committee for Standardization)

  • ISO (International Organization for Standardization)

    • These organizations work together to develop and maintain international standards.

    Evolution of Standards

    Standards evolve over time as new technologies and methods emerge. The BS EN 933-3 standard has undergone several revisions since its initial publication in 1999. Each revision includes updates to test methods, equipment, and procedures.

    Standard Numbers and Scope

    The BS EN 933-3 standard is divided into the following parts:

  • Part 1: Determination of particle shape by image analysis method

  • Part 2: Determination of particle shape by sieve test method

    • Each part specifies the test methods and requirements for determining particle shape.

    Industry-Specific Requirements

    Different industries have varying requirements for particle shape testing. For example, in the construction industry, particle shape is critical for ensuring that materials meet specific performance criteria.

    Consequences of Non-Compliance

    Failure to comply with BS EN 933-3 can result in:

  • Product rejection or recall

  • Loss of customer confidence and reputation

  • Non-compliance with regulatory requirements

    • Industries Requiring This Testing

    The following industries require particle shape testing:

  • Construction materials (cement, concrete, aggregates)

  • Ceramics and glass

  • Pharmaceuticals and cosmetics

  • Food and beverages

    • Risk Factors and Safety Implications

    Particle shape testing involves handling potentially hazardous materials. It is essential to follow proper safety protocols and guidelines to minimize risks.

    Quality Assurance and Quality Control

    Eurolab ensures that all tests are conducted in accordance with established quality control procedures. This includes:

  • Equipment calibration and maintenance

  • Sample preparation and handling

  • Data analysis and reporting

    • Product Safety and Reliability

    Particle shape testing contributes to product safety and reliability by ensuring that materials meet specific performance criteria.

    Competitive Advantages

    Conducting particle shape testing can provide a competitive advantage in various industries. This includes:

  • Ensuring compliance with regulatory requirements

  • Demonstrating quality and commitment to customer satisfaction

  • Improving product performance and safety

    • Cost-Benefit Analysis

    Performing particle shape testing can result in cost savings and efficiency improvements.

    Standards Compliance Requirements

    Different industries have varying standards compliance requirements. For example, in the construction industry, BS EN 933-3 is a mandatory requirement for ensuring that materials meet specific performance criteria.

    ---

    The determination of particle shape is essential for various industries to ensure that materials meet specific performance criteria. This section explains why this test is needed and required.

    Why This Test Is Needed

    Particle shape testing is necessary to:

  • Ensure compliance with regulatory requirements

  • Demonstrate quality and commitment to customer satisfaction

  • Improve product performance and safety

    • Business and Technical Reasons

    Conducting particle shape testing provides several business and technical reasons, including:

  • Ensuring that materials meet specific performance criteria

  • Improving product reliability and durability

  • Enhancing customer satisfaction and loyalty

    • Consequences of Not Performing This Test

    Failure to conduct particle shape testing can result in:

  • Product rejection or recall

  • Loss of customer confidence and reputation

  • Non-compliance with regulatory requirements

    • Industries Requiring This Testing

    The following industries require particle shape testing:

  • Construction materials (cement, concrete, aggregates)

  • Ceramics and glass

  • Pharmaceuticals and cosmetics

  • Food and beverages

    • ---

    This section provides a detailed explanation of the test conditions and methodology for determining particle shape.

    Test Methods

    The BS EN 933-3 standard specifies two test methods:

  • Image Analysis Method

  • Sieve Test Method

    • Equipment and Materials

    The following equipment and materials are required for particle shape testing:

  • Image analysis software

  • Computer with image processing capabilities

  • Sieves

  • Sample preparation equipment (e.g., grinding, sieving)

    • Test Procedure

    The test procedure involves the following steps:

    1. Sample preparation: Grinding or sieving to produce a uniform sample.

    2. Image acquisition: Capturing images of individual particles using an optical microscope or digital camera.

    3. Data analysis: Using image analysis software to determine particle shape parameters (e.g., aspect ratio, circularity).

    4. Reporting: Providing test results in accordance with the standard.

    Quality Control Procedures

    Eurolab ensures that all tests are conducted in accordance with established quality control procedures, including:

  • Equipment calibration and maintenance

  • Sample preparation and handling

  • Data analysis and reporting

    • ---

    This section provides additional information relevant to particle shape testing.

    Sample Preparation

    Proper sample preparation is essential for accurate results. This includes:

  • Grinding or sieving to produce a uniform sample

  • Ensuring that samples are representative of the material being tested

    • Data Analysis and Reporting

    Data analysis and reporting are critical aspects of particle shape testing. This includes:

  • Using image analysis software to determine particle shape parameters (e.g., aspect ratio, circularity)

  • Providing test results in accordance with the standard

    • Safety Precautions

    Particle shape testing involves handling potentially hazardous materials. It is essential to follow proper safety protocols and guidelines to minimize risks.

    ---

    Conclusion

    The determination of particle shape is a critical aspect of various industries. Eurolabs laboratory testing service ensures that all tests are conducted in accordance with established standards and protocols, providing accurate results and contributing to product safety and reliability.

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers