EUROLAB
astm-f963-84-mechanical-safety-tests
Mechanical and Physical Testing ASTM F1975 Standard Test Method for Toy Sharp EdgesASTM F2853 Standard Test Method for Toy DurabilityASTM F963 Standard Consumer Safety Specification for Toy SafetyASTM F963-00 Toy Sharp Point TestingASTM F963-01 Mechanical Safety Testing of ToysASTM F963-02 Mechanical Strength TestingASTM F963-03 Toy Sharpness TestingASTM F963-04 Toy Impact ResistanceASTM F963-05 Toy Mechanical Strength TestingASTM F963-06 Sharp Edges and Points TestASTM F963-07 Mechanical Performance of Toy SurfacesASTM F963-08 Toy Impact TestingASTM F963-09 Toy Durability under Compressive ForcesASTM F963-10 Toy Tension TestingASTM F963-11 Toy Fatigue TestingASTM F963-12 Toy Drop TestASTM F963-13 Mechanical Safety of Toy ComponentsASTM F963-14 Pulling Force on Toy StringsASTM F963-15 Sharp Point and Edge TestingASTM F963-17 Mechanical Hazard TestingASTM F963-80 Mechanical Safety CertificationASTM F963-81 Mechanical Strength and DurabilityASTM F963-82 Mechanical Safety ComplianceASTM F963-83 Mechanical Durability EvaluationASTM F963-85 Mechanical Strength and Safety TestingASTM F963-86 Mechanical Safety AssessmentASTM F963-87 Mechanical Properties EvaluationASTM F963-88 Mechanical and Physical Properties TestingASTM F963-89 Mechanical Strength Testing of ToysASTM F963-90 Mechanical Safety EvaluationASTM F963-91 Mechanical Testing of ToysASTM F963-92 Mechanical Safety TestingASTM F963-93 Mechanical Strength TestingASTM F963-94 Mechanical Performance TestingASTM F963-95 Mechanical Durability TestingASTM F963-96 Mechanical Properties TestingASTM F963-97 Mechanical Safety of Toy SurfacesASTM F963-98 Toy Durability TestingASTM F963-99 Mechanical Safety RequirementsEN 71-1 Mechanical and Physical Properties of ToysEN 71-10 Organic Chemical Compounds in ToysEN 71-13 Migration of Certain Elements in ToysEN 71-14 Toy Surface Coatings SafetyEN 71-15 Safety of Toys with Electrical ComponentsEN 71-16 Mechanical and Physical Properties of Toy AccessoriesEN 71-17 Safety Requirements for Soft ToysEN 71-18 Toy Parts Attachment StrengthEN 71-19 Testing of Toy Surface CoatingsEN 71-2 Flammability of ToysEN 71-20 Mechanical Strength of Toy AssembliesEN 71-21 Mechanical Properties of Toy WheelsEN 71-22 Testing of Toy Battery Operated ComponentsEN 71-23 Safety of Toys with Moving PartsEN 71-24 Toy Surface Abrasion ResistanceEN 71-25 Safety Requirements for Toy AccessoriesEN 71-26 Testing of Toy BatteriesEN 71-27 Testing of Toy Surface CoatingsEN 71-28 Mechanical and Physical Properties of Toy ComponentsEN 71-29 Mechanical Impact ResistanceEN 71-3 Migration of ElementsEN 71-30 Testing of Toy Parts AttachmentEN 71-31 Mechanical Properties of Toy MaterialsEN 71-32 Safety Requirements for Mechanical ToysEN 71-33 Testing of Toy Mechanical ComponentsEN 71-34 Mechanical Durability of ToysEN 71-35 Testing of Toy Surface Abrasion ResistanceEN 71-36 Testing of Toy Parts and ComponentsEN 71-37 Mechanical Strength of Toy AssembliesEN 71-38 Testing of Toy Battery SafetyEN 71-39 Safety Requirements for Toy Mechanical PropertiesEN 71-4 Experimental Sets for Chemistry and Related ActivitiesEN 71-40 Mechanical and Physical Testing for Toy SafetyEN 71-5 Chemical Toy Safety TestingEN 71-6 Organic Chemical Compounds in ToysEN 71-7 Finger Paints SafetyEN 71-8 Activity Toys for Domestic UseEN 71-9 Soluble Elements in ToysISO 18119 Toy Safety – Drop Test for ToysISO 8124-1 Safety of Toys – Mechanical and Physical PropertiesISO 8124-10 Small Parts TestingISO 8124-11 Strength Testing for Toys with WheelsISO 8124-12 Testing of Toy String and Cord SafetyISO 8124-13 Mechanical Impact Resistance TestingISO 8124-14 Testing of Toy Cords and ElasticsISO 8124-15 Mechanical Safety of Toy WheelsISO 8124-16 Testing of Small Parts in ToysISO 8124-17 Mechanical Durability of ToysISO 8124-18 Impact Testing of Toy MaterialsISO 8124-19 Testing for Toy Material ToxicityISO 8124-2 Flammability Testing of ToysISO 8124-20 Mechanical Impact Test on ToysISO 8124-21 Toy String and Cord Safety TestingISO 8124-22 Testing of Toy Components for Mechanical SafetyISO 8124-23 Mechanical Impact ResistanceISO 8124-24 Mechanical and Physical Properties of Toy MaterialsISO 8124-25 Mechanical Strength of ToysISO 8124-26 Mechanical Impact TestISO 8124-27 Mechanical Durability of Toy ComponentsISO 8124-28 Testing of Toy Materials for Mechanical StrengthISO 8124-29 Mechanical and Physical Tests for ToysISO 8124-3 Migration of Certain Elements in ToysISO 8124-30 Mechanical Durability TestingISO 8124-31 Mechanical Testing for Toy SafetyISO 8124-32 Mechanical Strength and Durability TestingISO 8124-33 Mechanical Impact TestingISO 8124-34 Mechanical and Physical Testing of Toy MaterialsISO 8124-35 Mechanical Performance TestingISO 8124-36 Mechanical and Physical Properties TestingISO 8124-37 Mechanical Impact Resistance TestingISO 8124-38 Mechanical and Physical Durability TestingISO 8124-39 Mechanical Performance AssessmentISO 8124-4 Mechanical Tests for Toy AccessoriesISO 8124-5 Testing of Toys for Small PartsISO 8124-6 Mechanical Strength Testing of ToysISO 8124-7 Mechanical and Physical Properties of Children's FurnitureISO 8124-8 Testing of Mechanical ToysISO 8124-9 Mechanical Performance of Battery Operated Toys

ASTM F963-84 Mechanical Safety Tests Laboratory Testing Service: A Comprehensive Guide

The ASTM F963-84 mechanical safety tests are a set of standardized procedures for testing the safety of childrens products, specifically toys and playground equipment. The standard is published by the American Society for Testing and Materials (ASTM) and is widely recognized as the industry benchmark for ensuring the safety of childrens products.

Legal and Regulatory Framework

The ASTM F963-84 standard is governed by various international and national standards, including:

  • ISO 8124:2015, which sets out requirements for safety testing of toys

  • EN 71:2018, which specifies the safety requirements for electrical and electronic equipment

  • TSE (Turkish Standards Institution) 1483:2017, which sets out the requirements for safety testing of toys

    • The European Unions Toy Safety Directive (2009/48/EC) also references the ASTM F963-84 standard as one of the acceptable methods for demonstrating compliance with EU safety regulations.

    International and National Standards

    The following international and national standards apply to ASTM F963-84 mechanical safety tests:

  • ISO 8124:2015, Safety aspects - Toys

  • EN 71:2018, Safety of electrical and electronic equipment within the scope of the Low Voltage Directive

  • TSE (Turkish Standards Institution) 1483:2017, Safety testing of toys

    • Standard Development Organizations

    The ASTM F963-84 standard is developed by the American Society for Testing and Materials (ASTM), which is a non-profit organization that develops and publishes voluntary consensus standards. Other standard development organizations include:

  • International Organization for Standardization (ISO)

  • European Committee for Electrotechnical Standardization (CENELEC)

    • How Standards Evolve and Get Updated

    Standards evolve and get updated through a continuous process of review, revision, and approval by the relevant standard development organization. The ASTM F963-84 standard has undergone several revisions since its initial publication in 1984.

    Standard Numbers and Scope

    The following are some key standard numbers and their scope:

  • ASTM F963-84: Mechanical safety tests for childrens products

  • ISO 8124:2015: Safety aspects - Toys

  • EN 71:2018: Safety of electrical and electronic equipment within the scope of the Low Voltage Directive

    • Standard Compliance Requirements

    Compliance with the ASTM F963-84 standard is a requirement for manufacturers who want to demonstrate that their childrens products meet safety regulations. The standard applies to various industries, including:

  • Toy manufacturers

  • Playground equipment suppliers

  • Baby product manufacturers

    • Why This Standard is Required

    The ASTM F963-84 standard is required because it provides a universally accepted set of criteria for testing the mechanical safety of childrens products. Manufacturers must comply with this standard to ensure that their products meet regulatory requirements and prevent harm to children.

    Business and Technical Reasons for Conducting ASTM F963-84 Mechanical Safety Tests

    Conducting ASTM F963-84 mechanical safety tests is necessary because it:

  • Ensures compliance with regulatory requirements

  • Prevents harm to children

  • Enhances product safety and reliability

  • Supports innovation and research development

    • Industry-Specific Examples and Case Studies

    Here are some industry-specific examples of how the ASTM F963-84 standard applies:

  • Toy manufacturers must test their products for mechanical safety, including parts that can detach or break off.

  • Playground equipment suppliers must ensure that their products meet specific safety standards for heights, weight capacities, and other factors.

    • The ASTM F963-84 standard requires manufacturers to conduct a range of mechanical safety tests on childrens products. These tests include:

    1. Drop tests: Testing the products ability to withstand drops from various heights.

    2. Impact tests: Testing the products ability to withstand impacts from different angles and velocities.

    3. Torsion tests: Testing the products ability to withstand twisting forces.

    The ASTM F963-84 standard specifies detailed procedures for conducting mechanical safety tests on childrens products. These include:

    1. Sample preparation: Preparing test samples in accordance with the standard.

    2. Testing equipment: Using specific testing equipment, such as drop testers or impact testers.

    3. Test parameters: Setting specific test parameters, including speed, force, and distance.

    The ASTM F963-84 standard requires manufacturers to document their test results in accordance with specific requirements. These include:

    1. Test report format: Following a standardized test report format.

    2. Data analysis: Analyzing test data using statistical methods.

    3. Certification and accreditation: Ensuring that testing is conducted by accredited laboratories.

    Performing the ASTM F963-84 mechanical safety tests is essential because it:

  • Enhances product safety and reliability

  • Supports innovation and research development

  • Prevents harm to children

  • Ensures compliance with regulatory requirements

    • Conclusion

    In conclusion, the ASTM F963-84 mechanical safety tests are a critical component of ensuring the safety of childrens products. Manufacturers must comply with this standard to demonstrate that their products meet regulatory requirements and prevent harm to children.

    ---

    Need help or have a question?
    Contact us for prompt assistance and solutions.

    CONTACT US +902127020000

    Latest News

    View all

    Eurolab Successfully Renews ISO 17025 Accreditation

    Read More

    Expanded Cosmetic Safety Testing Portfolio Now Available at Eurolab

    Read More

    Eurolab Launches Technical Training Series for Industry Professionals

    Read More

    JOIN US
    Want to make a difference?

    Careers